Fdit K1H16A Smart Thermostat Instruction Manual

1. Уводзіны

This manual provides instructions for the installation, operation, and maintenance of the Fdit K1H16A Smart Thermostat. This device is designed for controlling electric heating systems, including floor heating and radiators, utilizing a microcomputer for precise temperature management.

Асноўныя характарыстыкі:

• Шырокі дыяпазон тэмператур: Measurement accuracy of ±1℃ within a 0-50℃ range, allowing a set temperature range of 5-60℃.
• Кіраванне мікракампутарам: Utilizes a single-chip microcomputer for enhanced stability and anti-interference.
• Празрысты ВК-дысплей: Provides clear data display for easy reading and operation.
• Accurate Temperature Detection: Equipped with a high-precision sensor for reliable temperature monitoring.

2. Інфармацыя па бяспецы

Please read all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Мантаж павінен выконвацца кваліфікаваным электрыкам.
• Disconnect power at the circuit breaker before installing or servicing the thermostat.
• Пераканайцеся, што праводка адпавядае мясцовым электрычным нормам.
• Do not install in locations with excessive vibration, direct sunlight, or extreme temperature fluctuations.
• This thermostat is designed for AC 90V-240V, 16A electric heating systems. Verify your system's voltagе і сучасныя патрабаванні.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• Fdit K1H16A Smart Thermostat
• External NTC Temperature Sensor Cable
• Мантажныя шрубы (2)
• Кіраўніцтва карыстальніка (гэты дакумент)

Image: Contents of the Fdit K1H16A Smart Thermostat package, including the thermostat unit, the external NTC temperature sensor cable, and two mounting screws.

4. Ўстаноўка

4.1 Мантаж тэрмастата

1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, or heat sources.
2. Ensure the mounting type is surface mount.
3. Secure the thermostat base to the wall using the provided mounting screws.

4.2 Інструкцыі па падключэнні

WARNING: Disconnect power before wiring.

Refer to the wiring diagram on the back of the thermostat unit for correct connections. The thermostat supports AC 90V-240V, 16A electric heating systems.

• Connect the Live (L) and Neutral (N) power supply wires to terminals 1 and 2 respectively.
• Connect the heating load wires (L1 and N1) to terminals 3 and 4 respectively.
• Connect the external NTC temperature sensor wires to terminals 5 and 6.

Выява: Падрабязная view of the thermostat's rear, illustrating the wiring terminals (1-6) and the corresponding labels for Live, Neutral, Load, and NTC sensor connections. The model number K1H16A and voltage range AC90V-240V 16A are visible.

Image: The external NTC temperature sensor cable, typically used for floor temperature sensing in electric floor heating systems.

5. Аперацыя

5.1 ВК-дысплей большview

The thermostat features a clear LCD display that shows the current temperature, set temperature, operating mode, and other relevant information. The display has a backlight for visibility in various lighting conditions.

Image: The thermostat installed on a wall, showing its LCD display with current and set temperatures.

5.2 Функцыі кнопак

The thermostat is controlled via push buttons located below the LCD display:

Выява: Крупны план view of the thermostat's control panel, highlighting the power, ECO, time, and up/down arrow buttons.

• Кнопка харчавання (⏻): Уключае або выключае тэрмастат.
• Кнопка ECO: Activates or deactivates economy mode, if available. Refer to advanced settings for configuration.
• Кнопка часу (⏱): Used for setting the clock and accessing programmable schedules.
• Стрэлка ўверх (▲): Increases the set temperature or navigates menu options.
• Стрэлка ўніз (▼): Decreases the set temperature or navigates menu options.

5.3 Наладжванне тэмпературы

In normal operating mode, use the Up (▲) і ўніз (▼) arrow buttons to adjust the desired temperature. The new setting will be displayed and saved automatically.

5.4 Праграмуемыя функцыі

The thermostat supports programmable schedules. Press the Time (⏱) button to enter programming mode. Detailed instructions for setting daily or weekly schedules are typically found in the advanced settings menu, which can be accessed by specific button combinations (e.g., holding the Time button for several seconds).

5.5 Кіраванне праграмамі

This thermostat supports control via a mobile application. Please refer to the specific app's instructions for pairing and remote operation. App availability and features may vary.

6. Тэхнічнае абслугоўванне

The Fdit K1H16A Smart Thermostat requires minimal maintenance.

• Уборка: Wipe the thermostat's surface with a soft, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• агляд: Periodically check the wiring connections for tightness and ensure the thermostat is securely mounted.

7. Выпраўленне непаладак

Калі ў вас узніклі праблемы з тэрмастатам, звярніцеся да наступных распаўсюджаных крокаў па ліквідацыі непаладак:

Калі праблема не знікне, звярніцеся ў службу падтрымкі.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information or technical support, please refer to the retailer's policy or contact Fdit customer service directly. Keep your purchase receipt for warranty claims.

Contact information can typically be found on the product packaging or the official Fdit webсайт.