JETBeam E26 3-in-1 Flat Flashlight User Manual

1. Уводзіны

The JETBeam E26 is a versatile 3-in-1 flat flashlight designed for everyday carry (EDC), emergency situations, work, and outdoor activities. It integrates a powerful 2000-lumen white LED, a 365nm UV light, and a green laser beam into a compact, durable, and rechargeable unit. This manual provides essential information for the safe and effective use of your E26 flashlight.

Image 1.1: The JETBeam E26 3-in-1 Flat Flashlight, showcasinдзякуючы кампактнаму дызайну і ўключаным аксэсуарам.

2. Інфармацыя па бяспецы

Please read and understand all safety warnings before using this product. Failure to follow these instructions may result in injury or damage to the product.

2.1 Агульная бяспека

• High Output Warning: The E26 flashlight can produce up to 2000 lumens of white light. Avoid directing the beam directly into eyes, as this can cause temporary vision impairment or permanent eye damage.
• Выпрацоўка цяпла: The flashlight may become hot during prolonged use at high brightness levels. Exercise caution to prevent burns.
• Accidental Activation: Always engage the lockout function when carrying the flashlight in a pocket or bag to prevent accidental activation and potential hazards, such as overheating or damage to clothing.

2.2 UV Light Safety

• Абарона вачэй: Do not look directly into the UV light. Prolonged exposure to UV light can be harmful to eyes.
• Ўздзеянне на скуру: Avoid prolonged direct exposure of skin to UV light.
• Прызначэнне: The UV light is intended for detection purposes (e.g., pet stains, fluorescent agents) and not for general illumination.

2.3 Green Beam Safety

• Лазернае выпраменьванне: This product emits a Class 3R laser. Avoid direct eye exposure.
• дзеці: Keep out of reach of children. Supervise children if they are using the laser for pet play.
• Aircraft/Vehicles: Never point the laser at aircraft, vehicles, or reflective surfaces.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

• JETBeam E26 Flashlight (Battery Included) x 1
• Кіраўніцтва карыстальніка x 1
• Кабель для зарадкі USB x 1
• Шнурок х 1

4. Прадукт скончыўсяview

Familiarize yourself with the components and controls of your JETBeam E26 flashlight.

Image 4.1: Labeled diagram of the JETBeam E26 flashlight's key features.

• Белае святло: Primary illumination source.
• УФ-святло: Ultraviolet light for detection.
• Зялёны прамень: Laser pointer.
• Блакаванне: Position on the revolving switch to prevent accidental activation.
• Паваротны пераключальнік: Selects between White Light, UV Light, Green Beam, and Lock modes.
• Бакавы перамыкач: Controls brightness levels and activates selected light source.
• Порт тыпу C: Для зарадкі ўнутранай батарэі.
• Індыкатар: Паказвае стан зарадкі і ўзровень зарада батарэі.
• Тактычны перамыкач: Rear button for momentary turbo output and strobe function.

5. Настройка

5.1 Зарадка акумулятара

1. Знайдзіце порт зарадкі USB-C на бакавой частцы ліхтарыка.
2. Connect the provided USB-C charging cable to the port and a compatible USB power source.
3. The power indicator light will show the charging status:
   • Green: 35%-100% battery
   • Orange: 15%-35% battery
   • Red: Less than 15% battery (charge immediately)
4. Charging is complete when the indicator light remains green.

Image 5.1: USB-C charging port and battery indicator on the JETBeam E26.

5.2 Першапачатковае выкарыстанне

Before first use, ensure the revolving switch is moved from the 'Lock' position to the desired light source (White Light, UV, or Green Beam).

6. Інструкцыя па эксплуатацыі

6.1 Mode Selection (Revolving Switch)

The revolving switch on the side of the flashlight allows you to select the desired light source:

1. Павярніце перамыкач у становішча Замак symbol to prevent accidental activation.
2. Rotate to the Белае святло symbol for standard illumination.
3. Rotate to the УФ-святло symbol for ultraviolet light.
4. Rotate to the Зялёны прамень symbol for the laser pointer.

Image 6.1: The three distinct light sources of the E26 flashlight.

6.2 White Light Operation (Side Switch)

Once the revolving switch is set to White Light:

1. Уключыць/выключыць: Single press the side switch to turn the white light on or off.
2. Рэгуляванне яркасці: When the white light is on, press and hold the side switch to cycle through the four brightness levels: Low (15 lm), Medium (300 lm), High (700 lm), and Turbo (2000 lm). Release the switch at the desired brightness. The flashlight has a memory function and will recall the last used brightness level.

Image 6.2: Using the side switch to adjust white light brightness.

6.3 UV Light & Green Beam Operation (Side Switch)

Once the revolving switch is set to UV Light or Green Beam:

1. Уключыць/выключыць: Single press the side switch to activate or deactivate the selected UV light or Green Beam.

6.4 Tactical Tail Switch

The tactical tail switch provides quick access to high output and strobe functions, regardless of the revolving switch position:

1. Кароткачасовае турба: A heavy press and hold of the tactical tail switch will activate the white light at its maximum (Turbo) output. Release to turn off.
2. Строб: A slight press followed by a double press of the tactical tail switch will activate the strobe function. Press again to turn off.

Image 6.3: The tactical tail switch for instant high output and strobe.

6.5 Clip Usage

The E26 features a sturdy two-way clip for versatile carrying options. It can be attached to a pocket, hat brim, backpack strap, or other gear, allowing for hands-free operation.

Image 6.4: Versatile carrying options using the stainless steel clip.

7. Тэхнічнае абслугоўванне

• Уборка: Прачысціце корпус ліхтарыка мяккай губкайamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Порт для зарадкі: Keep the USB-C charging port free from dust and debris.
• захоўванне: Store the flashlight in a cool, dry place away from direct sunlight. For long-term storage, ensure the battery is partially charged (around 50%) and engage the lockout function.

8. Выпраўленне непаладак

8.1 Ліхтарык не ўключаецца

• Check if the revolving switch is in the 'Lock' position. Rotate it to the desired light source.
• Ensure the battery is charged. Connect the flashlight to a power source using the USB-C cable.

8.2 Light Output is Low or Flickering

• Charge the battery fully. Low battery can affect performance.
• Пераканайцеся, што лінза чыстая і без перашкод.

8.3 Accidental Activation in Pocket

• Always engage the 'Lock' position on the revolving switch when carrying the flashlight to prevent unintended operation.

9. Тэхнічныя характарыстыкі

Image 9.1: The E26 is designed to be waterproof and drop-resistant.

10. Афіцыйнае відэа прадукту

11. Інфармацыя аб гарантыі

The JETBeam E26 flashlight comes with a Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or contact JETBeam customer support.

12. Падтрымка

For further assistance, technical support, or inquiries regarding your JETBeam E26 flashlight, please refer to the contact information provided in your product packaging or visit the official JETBeam webсайт.