SUNLU Filament Connector FC-01 User Manual

Уводзіны

The SUNLU Filament Connector FC-01 is designed to efficiently join 1.75mm 3D printer filaments, allowing users to reuse broken or leftover filament pieces and create multi-color prints. This device features rapid and precise heating, broad material compatibility, and user-friendly operation. This manual provides essential information for the safe and effective use of your filament connector.

Image: The SUNLU Filament Connector FC-01, showcasing its design with two filaments inserted, alongside example 3D printed objects and a bag of PTFE sleeves.

Змест пакета

Калі ласка, пераканайцеся, што ўсе прадметы прысутнічаюць у вашай упакоўцы:

• Filament Connector Machine (FC-01)
• PTFE Sleeves (200 pieces)

Асноўныя характарыстыкі

• Filament Waste Reduction: Enables the reuse of broken or leftover filament segments.
• Multi-Color Printing: Facilitates joining different colored filaments of the same material for creative prints.
• Rapid & Precise Heating: Achieves 185°C in approximately 3 minutes, with a maximum temperature of 240°C and ±3°C accuracy.
• Шырокая сумяшчальнасць з матэрыяламі: Supports 1.75mm PLA, PETG, ABS, TPU, Nylon, and PC filaments.
• Зручнае кіраванне: Features one-click operation, preset temperature options, and a visual interface for monitoring.
• Бяспечны дызайн: Incorporates built-in insulating material to prevent burns during operation.

Выява: Оверview of the filament connector's professional features, including rapid heating, strong compatibility, ease of use, safe design, 1.75mm filament support, and safe operation, compatible with PLA, PETG, ABS, PA, and PC.

Image: An exploded diagram illustrating the safe and reliable design of the filament connector, highlighting the built-in insulating material that prevents burns.

Кіраўніцтва па ўстаноўцы

1. Распакуйце прыладу: Carefully remove the filament connector and all accessories from its packaging.
2. Праверце на наяўнасць пашкоджанняў: Check the device for any visible damage that may have occurred during shipping. If damaged, contact customer support.
3. Размяшчэнне: Place the filament connector on a stable, flat, and heat-resistant surface, away from flammable materials.
4. Падключэнне сілкавання: Connect the power adapter to the device and then plug it into a suitable power outlet. The device will power on and display its current status.

Інструкцыя па эксплуатацыі

Follow these steps to effectively join 1.75mm 3D printer filaments:

1. Prepare Filaments: Ensure both ends of the filaments to be joined are cut cleanly and are free of debris.
2. Падключыце харчаванне: Plug in the device. The display will activate.
3. Select Material and Temperature:

   Use the control buttons to select the appropriate filament material (e.g., PLA, PETG, ABS). The device has preset temperatures for common materials. Refer to the temperature chart below for guidance.

   

   Image: A visual guide demonstrating the four steps of using the filament connector: connecting power, choosing material with preset temperature, placing the filament, and completing the welding process.

4. Insert PTFE Sleeve: Slide one of the provided PTFE sleeves onto one of the filament ends. This sleeve will protect the joint and provide structural integrity.
5. Размяшчэнне нітак: Open the top cover of the connector. Insert both filament ends into the designated slots, ensuring they meet precisely in the heating chamber. The PTFE sleeve should be positioned over the joint area.
   

   Image: A detailed four-step visual guide on how to use the filament connector, from connecting power and selecting material to placing the filament and completing the weld.
6. Initiate Heating: Close the cover. The device will begin heating to the selected temperature. Monitor the progress on the display.
7. Filament Welding: Once the device reaches the target temperature and the melting time is complete (refer to the chart below), the filaments will be fused. The device may indicate completion.
8. Remove Fused Filament: Carefully open the cover and remove the newly joined filament. Allow it to cool completely before handling or winding onto a spool.

Filament Compatibility and Temperature Settings

The following table provides recommended settings for various 1.75mm filament types:

Image: A table detailing the compatibility of the filament connector with various 3D printer filaments (PLA, ABS, PETG, PA, PC) and their corresponding default melting temperatures, heating-up times, and recommended melting times.

Тэхнічнае абслугоўванне

• Уборка: Ensure the device is unplugged and completely cool before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Heating Chamber: Periodically inspect the heating chamber for any filament residue. If necessary, gently remove any melted plastic with a non-metallic tool after the device has cooled.
• захоўванне: Store the filament connector in a dry, dust-free environment when not in use.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

• мадэль: ФК-01
• Дыяметр ніткі: 1.75 мм
• Сумяшчальныя матэрыялы: PLA, PETG, ABS, TPU, Nylon, PC, PCL
• Maximum Heating Temperature: 240°C
• Дакладнасць тэмпературы: ±3°C
• Heating Time (to 185°C): Прыкладна 3 хвілін
• Памеры прадукту: 4.37 х 3.13 х 1.5 цалі (111 х 79.4 х 38 мм)
• Вага прадмета: 5 унцыі (143 грама)
• Тып матэрыялу: Пластыкавыя
• вытворца: kunphy

Image: A visual representation of the filament connector's heating capability, reaching up to 240°C, specifically designed for 1.75 mm diameter 3D filament.

Image: This image highlights the lightweight and compact design of the filament connector, showing it fitting into a pocket and its dimensions compared to a smartphone, emphasizing its portability.

Падтрымка кліентаў

For further assistance, technical support, or warranty inquiries, please contact your retailer or the manufacturer directly. Please have your product model number (FC-01) and purchase information ready when contacting support.

Manufacturer: kunphy