RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Прадукт скончыўсяview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Малюнак 1.1: Скончанаview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Інфармацыя па бяспецы

• ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Адключыце сілкаванне з дапамогай засцерагальніка або аўтаматычнага выключальніка перад устаноўкай або абслугоўваннем.
• Усталёўку павінен выконваць кваліфікаваны электрык у адпаведнасці з усімі нацыянальнымі і мясцовымі электрычнымі нормамі.
• Забяспечыць пастаўку абtage is correct for the fixture (120-277V).
• Не дакранайцеся да прыбора пад напругай мокрымі рукамі.
• Не ўстанаўлівайце паблізу гаручых матэрыялаў.
• Гэта прыстасаванне прызначана толькі для выкарыстання ў памяшканнях.

3. Настройка і ўстаноўка

3.1. Перад устаноўкай

• Распакаваць прыбор і праверыць яго на наяўнасць пашкоджанняў.
• Ensure all necessary components are present (LED Fixture).
• Перад пачаткам усталёўкі адключыце электрычнасць з дапамогай аўтаматычнага выключальніка.

3.2. Мантаж свяцільні

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Малюнак 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Электраправодка

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Малюнак 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Інструкцыя па эксплуатацыі

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Малюнак 4.1: Буйны план view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Выберыце адзін з наступных параметраў: 40 Вт, 50 Вт, або 60 Вт.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Выберыце адзін з наступных параметраў: 3500 тыс (Neutral White), 4000 тыс (Cool White), or 5000 тыс (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Функцыянальнасць рэгулявання яркасці

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Тэхнічнае абслугоўванне

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Уборка: Адключыце электрычнасць перад чысткай. Выкарыстоўвайце мяккую, сухую або злёгку змочаную губку.amp тканінай для працірання вонкавых паверхняў прыбора. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• святлодыёды: The integrated LED light source is designed for long life and does not require replacement.

6. Выпраўленне непаладак

If the fixture is not operating as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Тэхнічныя характарыстыкі

8. Інфармацыя аб гарантыі

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

9. Падтрымка кліентаў

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webсайт: www.rablighting.com
• Звярніцеся да website for current contact information, including phone numbers and email support.