1. Прадукт скончыўсяview
The Puig City Touring windscreen is designed to provide enhanced protection against wind, pollution, and adverse weather conditions for scooter riders. It is suitable for both urban commutes and longer journeys. Constructed from durable 3mm polycarbonate, this windscreen offers a balance of strength and lightness, contributing to riding stability and safety. The smoked finish provides a sophisticated look while maintaining clear visibility.
This windscreen is TÜV approved and ABE licensed, ensuring compliance with high safety and quality standards for public road use. Its aerodynamic design and rounded profile are engineered to optimize protection without negatively impacting vehicle maneuverability.
Image 1.1: Puig City Touring Windscreen installed on a red Honda scooter, showing its integration and appearance.
2. Настройка і ўстаноўка
The Puig City Touring windscreen includes specific brackets for straightforward and secure mounting on compatible scooters. For models not explicitly listed, a universal version with a complete fitting kit is available, offering the same quality and adaptability.
2.1. Сумяшчальныя мадэлі
- HONDA SCOOPY SH350i: 2021, 2022, 2023
- HONDA SH 125i 4T E5: 2021, 2022, 2023, 2024, 2025
- HONDA SH 150i 4T E5: 2021, 2022, 2023, 2024, 2025
- HONDA SH 350i E5: 2021, 2022, 2023, 2024
2.2. Змесціва ўпакоўкі
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:
- Puig City Touring Windscreen (Smoked)
- Specific mounting brackets
- Fasteners and hardware kit
Image 2.1: All components included with the Puig City Touring Windscreen, including the smoked screen and various mounting hardware pieces.
2.3. Працэдура ўстаноўкі
- Падрыхтоўка: Park the scooter on a stable, level surface. Ensure the engine is off and cool.
- Выдаліць існуючыя кампаненты (калі ёсць): If an old windscreen or fairing needs to be removed, carefully follow your scooter's service manual for removal instructions.
- Далучыць дужкі: Secure the specific mounting brackets to the scooter's handlebars or designated mounting points using the provided fasteners. Refer to the detailed diagram in the physical instruction sheet for precise placement.
- Mount Windscreen: Align the Puig City Touring windscreen with the attached brackets. Use the remaining fasteners to secure the windscreen to the brackets. Do not overtighten initially.
- Наладзіць пазіцыю: Gently adjust the windscreen's position to ensure proper alignment and clearance.
- Зацягніце зашпількі: Once satisfied with the position, progressively tighten all fasteners. Ensure they are snug but avoid excessive force to prevent damage to the polycarbonate or mounting points.
- Канчатковая праверка: Verify that the windscreen is securely mounted and does not obstruct steering, controls, or visibility.
Note: For detailed, model-specific installation steps, always refer to the physical instruction manual provided with your product. Professional installation is recommended if you are unsure about any steps.
3. Эксплуатацыя і выкарыстанне
The Puig City Touring windscreen is designed to enhance your riding experience by providing improved aerodynamic protection. Once installed, it functions passively to deflect wind, rain, and road debris, contributing to rider comfort and safety.
3.1. Benefits During Use
- Абарона ад ветру: Reduces wind blast on the rider's chest and head, decreasing fatigue on longer rides.
- Абарона ад надвор'я: Offers a barrier against rain and cold, improving comfort in adverse weather.
- Шчыт ад смецця: Protects the rider from small road debris and insects.
- Aerodynamic Stability: The design helps maintain vehicle stability by managing airflow effectively.
Image 3.1: A scooter equipped with the Puig City Touring Windscreen, demonstrating its protective coverage from a side perspective.
4. Тэхнічнае абслугоўванне
Proper maintenance will ensure the longevity and clarity of your Puig City Touring windscreen.
4.1. Інструкцыі па ачыстцы
- Паласканне: Gently rinse the windscreen with lukewarm water to remove loose dirt and dust. Avoid using high-pressure washers directly on the screen.
- мыць: Use a soft cloth or sponge and a mild soap solution (e.g., dish soap diluted in water). Gently wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate.
- Старанна прамыйце: Rinse again with clean water to remove all soap residue.
- Сухі: Dry the windscreen with a clean, soft microfiber cloth to prevent water spots. Do not wipe a dry, dirty screen, as this can cause scratches.
4.2. Агляд
Regularly inspect the windscreen and its mounting hardware for any signs of damage, cracks, or loose fasteners. Tighten any loose bolts as necessary. Replace the windscreen if it becomes severely scratched or damaged, as this can impair visibility and safety.
5. Выпраўленне непаладак
This section addresses common issues you might encounter with your windscreen.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Windscreen vibrates or rattles | Аслабленыя крапежныя элементы мацавання. | Check and tighten all mounting bolts and screws. Ensure all components are properly seated. |
| Reduced visibility due to scratches | Improper cleaning methods or impact damage. | Minor scratches may be polished with specialized polycarbonate polish. For severe scratches, replacement of the windscreen is recommended. Always use soft cloths and mild soap for cleaning. |
| Windscreen does not fit correctly | Incorrect model purchased or improper installation. | Verify that the windscreen model (21112H) is compatible with your scooter model and year. Re-check installation steps, ensuring brackets are correctly positioned. Contact Puig support if issues persist. |
6. Тэхнічныя характарыстыкі прадукту
- Марка: Пуіг
- мадэль: Гарадскія туры
- Нумар мадэлі тавару: 21112H
- Нумар дэталі вытворцы: 21112H
- вытворца: Motoplastic, S.A.
- матэрыял: 3mm High-Resistance Polycarbonate
- Колер/аздабленне: Вэнджаны
- Пасада: Верхні фронт
- Вага прадмета: 1.57 кілаграма
- Памеры ўпакоўкі: 57.8 х 45.7 х 12.1 см
- Тып падгонкі для аўтамабіляў: Падгонка пад канкрэтны аўтамабіль
- Сертыфікаты: TÜV approved, ABE licensed
Малюнак 6.1: Бакавы прафесіяналfile of the Puig City Touring Windscreen, illustrating its design and material thickness.
7. Гарантыя і падтрымка
Information regarding warranty coverage for Puig products is typically provided with the purchase documentation or can be found on the official Puig website. For specific warranty details, please refer to the terms and conditions provided at the time of purchase.
7.1. Падтрымка кліентаў
For technical assistance, installation queries, or any other support needs, please contact Puig customer service through their official website or authorized dealers. When contacting support, please have your product model number (21112H) and purchase details readily available.
You can visit the official Puig store for more information: Puig Store on Amazon.fr