Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch User Manual

1. Уводзіны

This manual provides detailed instructions for the installation, configuration, and operation of your Sodola 24-Port 2.5Gb Easy Smart Managed PoE Switch. This device is designed to provide high-speed network connectivity and Power over Ethernet (PoE) capabilities for various network devices.

The switch features 24 2.5Gb PoE ports and 2 10G SFP+ uplink ports, offering robust performance for demanding network environments. It supports web-based management for easy configuration and monitoring.

2. Змесціва ўпакоўкі

Пераканайцеся, што ваш пакет змяшчае наступныя элементы:

• 1 x Sodola 24-Port 2.5G Managed PoE Switch
• 1 х Шнур харчавання
• 1 х Кіраўніцтва карыстальніка (гэты дакумент)

3. Прадукт скончыўсяview

The Sodola 24-Port 2.5Gb PoE Switch is a multi-gigabit managed switch designed for high-performance networking. It offers a combination of 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities and 10 Gigabit SFP+ ports for high-speed uplinks.

3.1 Асноўныя магчымасці

• 2.5G & 10G PoE Switch: 24x 2.5Gb PoE ports + 2x 10G SFP+ ports for high-speed network connectivity.
• IEEE 802.3bt/at/af Compliant: Ports 1-4 support up to 90W each, and ports 5-24 support up to 30W each, with an overall PoE power budget of 500W. Note: Does not support passive 24V PoE devices.
• лёгка Web Кіраванне: Інтуітыўна зразумелы web interface for device status monitoring and configuration of features like Link Aggregation, VLAN, QoS, Multicast, MAC, and RSTP.
• Прапускная здольнасць 160 Гбіт/с: Robust switching capacity for lag-free data transfers.
• Універсальная сумяшчальнасць: Compatible with various Ethernet devices such as 2.5G WiFi 6 APs, 2.5G NAS, 2.5G PCIe Adapters, and 2.5G Servers.
• 1U Rack Mounted Design: Supports 1U rack mounting and features a bilateral cooling design without a built-in fan for silent operation.

3.2 Размяшчэнне пярэдняй панэлі

Figure 1: Front Panel Layout with Port and Indicator Labels

• 1. 1G/10G or 2.5G/10G SFP+ Ports: Two ports for high-speed fiber optic uplinks.
• 2. 24x 10/100/1000M/2.5G PoE Ports: Twenty-four 2.5 Gigabit Ethernet ports with Power over Ethernet capabilities.
• 3. Кнопка СКІДАННЯ: Націсніце і ўтрымлівайце 6 секунд, каб аднавіць заводскія налады.
• 4. LINK/ACT & PoE Indicators: LEDs indicating link status, activity, and PoE power status for each port.
• 5. SYS Indicator: Індыкатар стану сістэмы.
• 6. PWR Indicator: Індыкатар харчавання.

3.3 Кампаноўка задняй панэлі

Figure 2: Rear Panel Layout with Power Input and Grounding Screw

• 7. AC INPUT 100-240V: Power input for the switch.
• 8. Ground Screws: Для падлучэння зазямляльнага провада для забеспячэння электрабяспекі.
• 9. PoE MAX Indicator: Shows the PoE power usage status (OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%).

4. Настройка

Follow these steps to set up your Sodola PoE Switch:

4.1 Фізічная ўстаноўка

• Размяшчэнне на працоўным стале: Размясціце камутатар на роўнай, устойлівай паверхні. Забяспечце дастатковую вентыляцыю вакол прылады.
• Мантаж у стойку: The switch supports 1U rack mounting. Use appropriate rack-mount brackets (not included unless specified) to secure the device in a standard 19-inch server rack.

Figure 3: Rack Mounting Example

4.2 Падключэнне харчавання

1. Connect the provided power cord to the AC INPUT port on the rear panel of the switch.
2. Plug the other end of the power cord into a standard AC power outlet (100-240V).
3. The PWR indicator on the front panel should illuminate, indicating the switch is receiving power.

4.3 Сеткавыя злучэнні

Connect your network devices to the switch using Ethernet cables. For optimal 2.5GbE speeds, use Cat6 or higher pure copper cables. Ensure all connected devices (routers, NICs, etc.) also support 2.5GbE; otherwise, network speed will default to the slowest connected device.

• Прылады PoE: Connect PoE-compatible devices (e.g., IP cameras, wireless access points) to ports 1-24. These ports will automatically detect and provide power to compliant devices.
• Non-PoE Devices: Non-PoE devices can also be connected to ports 1-24 for data connectivity.
• Узыходзячая сувязь: Use the 10G SFP+ ports for high-speed connections to your core network, servers, or other 10G-capable devices.

5. Інструкцыя па эксплуатацыі

The Sodola PoE Switch is largely plug-and-play for basic network connectivity. Once powered on and devices are connected, it will begin forwarding data.

5.1 Святлодыёдныя індыкатары

Сачыце за станам прылады за святлодыёднымі індыкатарамі на пярэдняй панэлі:

• PWR: Solid green when the switch is powered on.
• СІСТЭМА: Indicates system status. Refer to the full user manual for specific blink patterns.
• LINK/ACT (per port): Solid green when a link is established, flashing green when data is being transmitted/received.
• PoE (на порт): Solid green when PoE power is being supplied to a connected device.
• PoE MAX: Indicates total PoE power usage. OFF: <90%, FLASHING: 90%-95%, ON: 95%-100%.

5.2 Скід да заводскіх налад

To restore the switch to its factory default settings, press and hold the RESET button on the front panel for approximately 6 seconds. The switch will reboot with default configurations.

6. Web Кіраванне

The switch features an easy-to-use web-based management interface for advanced configuration and monitoring.

6.1 Доступ да Web Інтэрфейс

1. Ensure your computer is connected to the switch via an Ethernet cable.
2. Configure your computer's IP address to be in the same subnet as the switch's default IP address (e.g., if the switch is 192.168.2.1, set your computer to 192.168.2.x, where x is not 1).
3. Адкрыйце a web браўзер і ўвядзіце IP-адрас камутатара па змаўчанні: 192.168.2.1
4. Увядзіце ўліковыя дадзеныя для ўваходу па змаўчанні: Імя карыстальніка: admin, Пароль: admin.
5. Upon successful login, you will access the web інтэрфейс кіравання.

Малюнак 4: Web Management Interface Login

6.2 Configuration Features

The web interface allows you to configure various network settings, including:

• Link Aggregation (LACP): Combine multiple physical links into a single logical link for increased bandwidth and redundancy.
• VLAN: Create Virtual Local Area Networks to segment your network for improved security and performance.
• Якасць абслугоўвання (QoS): Прыярытэзуйце сеткавы трафік, каб забяспечыць дастатковую прапускную здольнасць крытычна важных праграм.
• Multicast (IGMP Snooping): Optimize multicast traffic delivery to reduce network congestion.
• MAC Address Management: Control access based on MAC addresses.
• RSTP (Rapid Spanning Tree Protocol): Прадухіляйце зацыкленні ў сетцы і забяспечвайце стабільнасць сеткі.
• Зеркаванне порта: Monitor network traffic by sending a copy of packets from one port to another.
• Падтрымка Jumbo Frame: Increase data transfer efficiency for large packets.

Important: After making any configuration changes in the web interface, navigate to the 'Tools' or 'Save' section and save your settings to ensure they are retained after a power cycle.

7. Тэхнічныя характарыстыкі

8. Выпраўленне непаладак

• Няма харчавання: Ensure the power cord is securely connected to both the switch and a working power outlet. Check the PWR LED.
• Няма спасылкі/актыўнасці: Verify that Ethernet cables are properly connected to both the switch and the network device. Check the LINK/ACT LED for the respective port. Ensure the connected device is powered on and functioning correctly.
• Павольная хуткасць сеткі: For 2.5GbE connections, ensure you are using Cat6 or higher pure copper cables and that all devices in the network path support 2.5GbE.
• Прылада PoE не ўключаецца: Confirm the connected device is PoE-compatible (IEEE 802.3af/at/bt). Check the PoE LED for the port. Ensure the total PoE power budget of 500W is not exceeded. Passive 24V PoE devices are not supported.
• Немагчыма атрымаць доступ Web інтэрфейс: Verify your computer's IP address is in the same subnet as the switch's default IP (192.168.2.1). Ensure the correct default username and password ('admin'/'admin') are used. Try resetting the switch to factory defaults if the IP address has been changed and forgotten.
• Configuration Changes Not Saved: Remember to explicitly save configurations through the web interface after making changes.

9. Тэхнічнае абслугоўванне

• Уборка: Для чысткі вонкавага боку перамыкача выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце вадкія або аэразольныя ачышчальнікі.
• Вентыляцыя: Ensure the ventilation openings on the sides of the switch are not obstructed to allow for proper heat dissipation.
• Абнаўленні прашыўкі: Перыядычна правярайце інфармацыю вытворцы webсайт для абнаўленняў прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і бяспеку.

10. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Sodola webсайт. Захоўвайце чэк аб пакупцы на выпадак прэтэнзій па гарантыі.