Інструкцыя па эксплуатацыі лазернага гравіравальнага станка ATOMSTACK P9 M50

1. Уводзіны

The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.

• Абарона вачэй: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
• Аварыйная прыпынак: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
• Вентыляцыя: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
• Бяспека матэрыялаў: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
• Кантроль: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
• Дзеці і хатнія жывёлы: Keep children and pets away from the operating area and the machine at all times.

Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у камплекце:

• 1 x ATOMSTACK P9 M50 Laser Engraving Machine
• Parts for screw assembly (steps 2/3/4/5)
• 1 x Anti-dust cloth
• 1 x Tool set
• 1 x Fixed focus film
• 3 x Acrylic panels
• 3 x Wood chips
• 1 х счытвальнік карт
• 5 х кабельныя сцяжкі
• 1 x Accessory package
• 1 x Display assembly
• 1 x Display cable
• 1 х адаптар сілкавання
• 1 х кабель харчавання
• 1 х кабель для перадачы дадзеных
• 1 x Metal cutting support plate
• 1 х Кіраўніцтва
• 1 x Laser assembly
• 1 x X-axis assembly
• 1 x Y-axis assembly
• 2 х апорныя ножкі
• 4 x Mounting spacers

4. Кіраўніцтва па наладцы

The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:

1. Распакаванне: Carefully remove all components from the packaging and place them on a clean, stable surface.
2. Зборка рамы: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
3. Усталёўка лазернага модуля: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
4. Апорныя ножкі: Attach the two support feet to the base of the machine for stability.
5. Тэрмінал кіравання: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
6. Падключэнне сілкавання: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
7. Злучэнне для перадачы дадзеных: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.

Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.

Figure 4.2: Independent Control Terminal connection.

5. Інструкцыя па эксплуатацыі

5.1 Software Installation and Connection

The ATOMSTACK P9 M50 is compatible with popular laser engraving software:

• LaserGRBL: Supports Win XP/Win 7/Win 8/XP/Win 10.
• LightBurn: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.

Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.

Figure 5.1: Software Compatibility and Connection.

5.2 Гравіроўка ў аўтаномным рэжыме

The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.

1. Prepare your engraving file (NC, BMP, JPG, PNG, DXF) using your chosen software.
2. Захаваць file to a TF card.
3. Insert the TF card into the slot on the control terminal.
4. Use the terminal's interface to select and start your engraving project.

Figure 5.2: Independent Control Terminal for Offline Engraving.

5.3 Fixed Focus Laser

The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.

Figure 5.3: Fixed Focus Laser Technology.

5.4 Матэрыялы, якія падтрымліваюцца

The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:

Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:

• Clean the Laser Lens: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
• Clean the Work Area: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
• Змазка рухомых частак: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
• Праверце кабелі: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.

7. Выпраўленне непаладак

This section addresses common issues you might encounter with your ATOMSTACK P9 M50.

8. Тэхнічныя характарыстыкі

Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:

Малюнак 8.1: Памеры вырабу і асноўныя характарыстыкі.

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official ATOMSTACK webсайт або звярніцеся да прадаўца. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Інтэрнэт-рэсурсы:

• Visit the official ATOMSTACK store on Amazon: ATOMSTACK Official Store
• For software support, visit the official webсайты ЛазерГРБЛ і LightBurn.