DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Асноўныя магчымасці

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampмесца для захоўвання дадзеных.
• Вертыкальнае мацаванне відэакарты: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Сумяшчальнасць матчынай платы: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Падтрымка пашыранага астуджэння: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Аптымізаваны паветраны паток: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Front Panel Connectivity: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Тэхнічныя характарыстыкі

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Кіраўніцтва па наладцы

4.1. Падрыхтоўка справы

1. Распакуйце корпус: Carefully remove the computer case from its packaging.
2. Зняць бакавыя панэлі: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Праверце аксэсуары: Verify all included accessories (screws, cable ties, manual) are present.

4.2. Устаноўка мацярынскай платы

1. Усталяваць Standoffs: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. Усталюйце экран уводу/вываду: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Мацаванне матчынай платы: Акуратна выраўнуйце матчыну плату з апорамі і шчытком уводу/вываду. Замацуйце яе з дапамогай шруб, якія ўваходзяць у камплект.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Усталёўка дыска (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Усталёўка відэакарты (GPU)

• Стандартная ўстаноўка: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Вертыкальная ўстаноўка: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Налада сістэмы астуджэння

• Папярэдне ўсталяваныя вентылятары: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Кіраванне кабелем

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Выява: Разабраная view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Інструкцыя па эксплуатацыі

• Уключэнне/выключэнне харчавання: Use the power button located on the top front panel to turn the system on or off.
• Кнопка скіду: The reset button is also on the top front panel for system restarts.
• Парты на пярэдняй панэлі: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Тэхнічнае абслугоўванне

• Ачыстка пылавога фільтра: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Унутраная ачыстка: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Выпраўленне непаладак

• Сістэма не ўключаецца:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Check all internal power connections (24-pin ATX, CPU power, GPU power).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Няма вываду на дысплей:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Пераўсталюйце відэакарту і модулі аператыўнай памяці.
• Праблемы з перагрэвам:
  • Ensure all case fans are spinning and connected correctly.
  • Ачысціце пылавыя фільтры і ўнутраныя кампаненты.
  • Праверце, ці правільна ўсталяваны кулер працэсара і ці добра ён кантактуе з ім.
• Дыск не выяўлены:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Гарантыя і падтрымка

The DARKROCK Classico Max computer case comes with a Гарантыя 1 год з даты пакупкі. Гэтая гарантыя распаўсюджваецца на вытворчыя дэфекты і дэфекты матэрыялаў пры нармальным выкарыстанні.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце пацвярджэнне пакупкі для пацверджання гарантыі.

Official DARKROCK Store: DARKROCK Amazon Store

9. Медыягалерэя

Выява: Пярэдні бок view of the DARKROCK Classico Max computer case.

Выява: Унутраная view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Выява: Разабраная view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

Відэа