1. Уводзіны
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP Freelift Pro Dual Monitor Mount. Please read this guide thoroughly before installation to ensure correct setup and safe usage. This monitor mount is designed to enhance your workspace ergonomics and free up desk space by securely holding two monitors.
2. Інфармацыя па бяспецы
- Перад зборкай пераканайцеся, што ўсе кампаненты наяўныя і не пашкоджаныя. Не выкарыстоўвайце, калі якія-небудзь дэталі адсутнічаюць або дэфектныя.
- Follow all assembly steps carefully. Incorrect installation may result in product damage or personal injury.
- Не перавышайце максімальную грузападымальнасць 10 кг на руку.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitors.
- Do not install on tempered glass table tops.
- Не дапускайце дзяцей і хатніх жывёл падчас ўстаноўкі.
3. Змесціва ўпакоўкі
Пераканайцеся, што ўсе пералічаныя ніжэй дэталі ўваходзяць у камплект пастаўкі:
- Main Pole and Base
- Dual Gas Spring Arms
- VESA Plates (x2)
- C-Clamp зборка
- Grommet Base Assembly
- Hardware Kit (screws, washers, spacers)
- Шасцігранныя ключы (розныя памеры)
- Кліпы для кіравання кабелем
Refer to the 'Package List' section in the installation video for a visual guide to all included components.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates the unboxing and initial setup steps, including a visual overview усіх частак.
4. Настройка
4.1 Choose Mounting Type
The MOUNTUP Freelift Pro offers two installation options: C-Clamp or Grommet Mount. Select the method best suited for your desk.
- C-Clamp Мацаванне: For desk thickness within 0.39''-2.76''.
- Мацаванне люверса: For desk thickness within 0.39''-2.76'' and hole diameter within 0.39''-2.36''.
Image: Two Installation Options - Illustrates the C-clamp and grommet mounting methods with desk thickness and hole diameter specifications.
4.2 Base Installation (C-Clamp або люверс)
Follow the instructions in the video for your chosen mounting type:
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates both C-clamp and grommet base installation steps from 0:03 to 0:34.
4.3 Arm Installation
Attach the gas spring arms to the installed base as shown in the video.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates arm installation from 0:35 to 0:45.
4.4 Далучыце пласціну VESA да манітора
Secure the VESA plate to the back of your monitor using the provided screws. Ensure the plate is firmly attached.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates attaching the VESA plate to the monitor from 0:46 to 0:51.
4.5 Slide Monitor onto Arm
Carefully slide the monitor (with attached VESA plate) onto the arm's mounting head until it clicks into place. Secure it with the locking knob.
Image: Quick Release VESA Plate - Shows the quick-release VESA plate mechanism for easy monitor attachment and removal.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates sliding the monitor onto the arm from 0:52 to 0:56.
5. Інструкцыя па эксплуатацыі
5.1 Рэгуляванне становішча манітора
The Freelift Pro Dual Monitor Mount offers full motion adjustment for optimal viewкамфорт:
- Нахіл: ад +85° да -45°
- Паваротны: 180° (at VESA plate), 360° (at arm joint), 270° (at base joint)
- Кручэнне: 360° (portrait to landscape)
- Рэгуляванне вышыні: Max height up to 17.3 inches (from desk surface)
- Пашырэнне: Each arm extends up to 21 inches
Image: Freely Position Your Screen - Highlights the maximum height and extension capabilities of the monitor arms.
Image: Optimize Your View - Demonstrates the swivel, height, tilt, and rotation ranges for flexible monitor positioning.
Image: Full Motion Adjustment - Details the extensive swivel capabilities at different points of the monitor arm.
Video: Freelift Pro Dual Monitor Arm Function - Demonstrates the full range of motion, including tilt, swivel, and rotation.
5.2 Gas Spring Tension Adjustment
The gas spring tension may need adjustment depending on your monitor's weight. Use the provided Allen key to adjust the tension screw located on the arm.
- To reduce tension (for lighter monitors or if arms are too stiff): Turn the screw clockwise (towards '-').
- To increase tension (for heavier monitors or if arms are falling down): Turn the screw counter-clockwise (towards '+').
Each turn needs to be a full 360 degrees. Hold the arm in a horizontal position during adjustment.
Image: Gas Spring Adjust - Provides a visual guide for adjusting gas spring tension and tilt.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates resetting spring tension from 1:06 to 1:11.
6. Кіраванне кабелем
Route your monitor cables through the integrated cable management channels on the arms to maintain a tidy workspace.
Image: Organize Wires and Tools - Shows how to manage cables and store Allen keys within the arm for convenience.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates cable management from 0:57 to 1:02.
7. Тэхнічнае абслугоўванне
- Regularly check all screws and connections to ensure they are tight and secure.
- Clean the monitor mount with a soft, damp тканінай. Пазбягайце абразіўных ачышчальнікаў або растваральнікаў.
- Periodically re-adjust gas spring tension if monitors feel too loose or too stiff over time.
8. Выпраўленне непаладак
If you encounter any issues with your monitor mount, refer to the common problems and solutions below:
8.1 Arms Falling Down / Can't Rise Up
This indicates that the gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise ('+') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.2 Arms Rising Up / Can't Fall Down
This indicates that the gas spring tension is too high for your monitor's weight. Decrease the tension by turning the adjustment screw clockwise ('-') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.3 Monitors Face Down / Can't Be Adjusted Tilt
The tilting bolt may be too tight. Loosen the tilting bolt (towards '-') with an Allen key, adjust the monitor to your desired angle, then retighten the bolt (towards '+') to fix the angle.
8.4 Swivels Left and Right is Loose / Monitor Can't Swivel
Adjust the tightness of the swivel screw using an Allen key. Tighten or loosen as needed to achieve the desired swivel resistance.
Video: Freelift Pro Dual Monitor arm trouble shooting - This video provides visual guidance for adjusting tension, tilt, and swivel to resolve common issues.
9. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Сумяшчальны памер манітора | 22" - 32" (flat or curved LCD) |
| Грузападымальнасць (на руку) | 4.4 - 22 фунты (2 - 10 кг) |
| Сумяшчальнасць VESA | 75х75 мм, 100х100 мм |
| Дыяпазон нахілу | ад +85° да -45° |
| Дыяпазон павароту | 180° (at VESA plate), 360° (at arm joint), 270° (at base joint) |
| Кручэнне | 360° |
| Max Height (from desk) | 17.3 цаляў |
| Max Extension (per arm) | 21 цаляў |
| Варыянты мантажу | C-Clamp, Люверс |
| C-Clamp Таўшчыня працоўнага стала | 0.39'' - 2.76'' |
| Таўшчыня люверса для стала | 0.39'' - 2.76'' |
| Дыяметр адтуліны для люверса | 0.39'' - 2.36'' |
| Матэрыял | Легаваная сталь |
Image: Perfect For Your Screen - Overview of product compatibility including load capacity, screen size, and VESA patterns.
10. Гарантыя і падтрымка
For warranty information or technical support, please refer to the product packaging or contact MOUNTUP customer service directly. Keep your purchase receipt for warranty claims.