Auxbeam Side Shooter LED Lights Bundle Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your Auxbeam Side Shooter LED Lights Bundle. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Інфармацыя па бяспецы

Заўсёды выконвайце наступныя меры бяспекі:

• Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock.
• Карыстайцеся адпаведнымі сродкамі індывідуальнай абароны, у тым ліку ахоўнымі акулярамі і пальчаткамі.
• Do not look directly into the light when it is operating, as it can cause eye damage.
• Пераканайцеся, што ўсе злучэнні правадоў надзейныя і належным чынам ізаляваныя, каб пазбегнуць кароткага замыкання.
• Mount the lights securely to prevent them from becoming loose during vehicle operation.
• Check local regulations regarding auxiliary lighting before permanent installation.

3. Змесціва ўпакоўкі

Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:

• 2 x LED Pod Lights
• 2 ахоўныя чахлы
• 1 x DT Wiring Harness
• 1 x Mounting Kit (brackets, screws, nuts)
• 1 х Кіраўніцтва карыстальніка (гэтае кіраўніцтва)
• 1 x Specification Sheet
• 1 x Brand Sticker

Image: Contents of the Auxbeam LED Pod Lights package, showing two lights, wiring harness, and mounting hardware.

4. Тэхнічныя характарыстыкі

Image: Diagram showing the dimensions of the 5-inch Auxbeam LED lights and various mounting locations on a vehicle (roof, A-pillar, bumper).

5. Настройка і ўстаноўка

5.1 Мантаж лямпаў

The Auxbeam LED lights can be mounted in various locations on your vehicle, such as A-pillars, windshield frames, bull bars, bumpers, or roof racks. Use the provided mounting kit and adjustable brackets to secure the lights. Ensure the mounting surface is strong enough to support the lights and that they are positioned to provide optimal illumination without obstructing your view or violating local regulations.

5.2 Падключэнне электраправодкі

Follow the wiring diagram below for proper electrical connection. The included DT wiring harness is designed for plug-and-play installation.

1. Connect the positive (+) wire (red) from the DT wiring harness to the positive terminal of your vehicle's battery.
2. Connect the negative (-) wire (black) from the DT wiring harness to the negative terminal of your vehicle's battery or a suitable ground point on the chassis.
3. Connect the DT plugs from the wiring harness to the corresponding connectors on the LED pod lights. Ensure a secure connection.
4. Mount the switch in a convenient location within the vehicle's cabin.
5. Test the lights to ensure they function correctly before finalizing all connections and tidying up the wiring.

Image: Detailed wiring diagram showing connections for the Auxbeam LED lights, including battery, fuse, relay, switch, and DT plugs.

Заўвага: The DT wiring harness includes a blade fuse and an automotive relay for protection and proper power management. Do not bypass these components.

6. Інструкцыя па эксплуатацыі

The Auxbeam Side Shooter LED Lights feature multiple lighting modes controlled by the included switch.

6.1 рэжымаў асвятлення

The lights offer three distinct modes:

• Main Light with Side Shooter ON (3000K): Activates the primary LED chips and the side shooter LEDs for maximum forward and peripheral illumination.
• Amber DRL ON (3000K): Activates the amber Daytime Running Lights (DRL) for enhanced visibility during the day or as a stylistic accent.
• All Lights ON: Combines the main light, side shooters, and amber DRLs for comprehensive lighting.

Cycle through these modes using the ON/OFF switch. Each press of the switch will typically change the mode.

Image: Visual representation of the three lighting modes: Main light with side shooter, Amber DRL, and All lights on, showing the different light patterns.

6.2 Protective Covers

The included black protective covers serve multiple purposes:

• Адпаведнасць дарожнага заканадаўства: In some regions, auxiliary lights must be covered when not in use on public roads.
• Абарона аб'ектыва: Protects the light lenses from scratches, impacts, and debris when off-road or parked.
• Эстэтычны: Provides a rugged, custom look to your vehicle.

Attach the covers when driving on public roads or when the lights are not needed to extend their lifespan and comply with regulations.

Image: Comparison of a vehicle with Auxbeam lights uncovered versus covered with protective covers, highlighting the benefits of covers.

7. Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and longevity of your Auxbeam LED lights.

• Уборка: Clean the lenses regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens.
• агляд: Periodically check all mounting hardware for tightness. Vibrations from driving can loosen fasteners over time.
• Праводка: Inspect the wiring harness for any signs of wear, fraying, or damage. Ensure all connections remain secure and waterproof.
• Breather Vent: The lights are equipped with a military breather vent. Ensure it remains clear of debris to allow proper pressure equalization and prevent condensation.

Image: Diagram illustrating the heat management system with thickened heatsinks and breathing vent, alongside the IP68 waterproof rating.

8. Выпраўленне непаладак

If you encounter issues with your Auxbeam LED lights, refer to the following common problems and solutions:

9. Гарантыя і падтрымка кліентаў

Auxbeam products are backed by a Гарантыя 24 месяцаў, ensuring reliable performance and durability.

If you experience any issues or have questions regarding your Auxbeam Side Shooter LED Lights, please contact our customer support team. We are available 24/7 to provide assistance.

Кантактная інфармацыя:

• Webсайт: www.auxbeam.com
• электронная пошта: support@auxbeam.com
• тэлефон: Refer to the Auxbeam webсайт рэгіянальных кантактных тэлефонаў.

Please have your product model number (ZD000821+ZD000809) and purchase date ready when contacting support.