ACEZUK M06

ACEZUK M06 6000A Car Jump Starter with 150PSI Air Compressor User Manual

Model: M06 | Brand: ACEZUK

1. Прадукт скончыўсяview

Асноўныя характарыстыкі

  • 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
  • 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
  • Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
  • Знешні акумулят ёмістасцю 21800 мАг: Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
  • Практычны дызайн: Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
  • Smart Jump Cables: Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.

Змест пакета

  • 1 x ACEZUK M06 Jump Starter with Air Compressor
  • 1 x Smart Jump Cable
  • 1 x Air Pump Hose
  • 4 x Gas Nozzles
  • 1 х кабель для зарадкі USB-C
  • 1 х Кіраўніцтва карыстальніка
  • 1 x Portable EVA Carrying Case
Contents of the ACEZUK M06 package including the jump starter, cables, hose, nozzles, and carrying case.
Figure 1: Package Contents of the ACEZUK M06 Jump Starter and Air Compressor.

2. Інфармацыя па бяспецы

Калі ласка, прачытайце і зразумейце ўсе інструкцыі па тэхніцы бяспекі перад выкарыстаннем гэтага прадукта. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару і/або сур'ёзных траўмаў.

  • Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
  • Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
  • Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
  • Захоўвайце прыладу і яе аксэсуары ў месцах, недаступных дзецям.
  • Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
  • Захоўвайце прыладу ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў, вільгаці і лёгкаўзгаральных матэрыялаў.
  • Use only the provided smart jump cables and accessories with this device.

3. Настройка

Зарадка прылады

Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.

  1. Connect the provided USB-C charging cable to the device's Type-C input port.
  2. Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
  3. The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.

Першапачатковы агляд

Upon receiving your ACEZUK M06, perform a quick inspection:

  • Check the device and all accessories for any visible damage.
  • Ensure all components listed in the 'Package Contents' section are present.

4. Інструкцыя па эксплуатацыі

4.1 Запуск аўтамабіля з дапамогай адскока

Выканайце наступныя дзеянні, каб бяспечна завесці свой аўтамабіль ад адмоўнага ходу:

  1. Пераканайцеся, што запальванне аўтамабіля выключана, а стаяначны тормаз уключаны.
  2. Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
  3. Злучыць чырвоны склamp да станоўчага (+) вываду акумулятара аўтамабіля.
  4. Злучыць чорны склamp да мінусавай (-) клемы акумулятара аўтамабіля.
  5. If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
  6. Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
  7. Як толькі аўтамабіль завядзецца, неадкладна зніміце замокamps from the battery terminals within 30 seconds. First, remove the black clamp, then the red clamp.
ACEZUK M06 Jump Starter connected to a car battery with smart clamps.
Малюнак 2: Правільнае падключэнне стартара да акумулятара аўтамабіля.
Smart jump cables with built-in safety features and indicator lights.
Figure 3: Smart jump cables providing multiple safety protections.

Video 1: Demonstration of how to force start a car using a jump starter.

Video 2: Step-by-step guide on how to jump start a car.

4.2 Выкарыстанне паветранага кампрэсара

To inflate tires or other inflatables:

  1. Каб уключыць прыладу, націсніце кнопку ON/OFF.
  2. Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
  3. Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
  4. Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
  5. Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
  6. Press and hold the air pump button for 3 seconds to begin inflation.
  7. Кампрэсар аўтаматычна спыніцца, як толькі будзе дасягнуты зададзены ціск.
  8. Briefly press the air pump button again to exit inflation mode.
ACEZUK M06 Air Compressor inflating a car tire.
Figure 4: The air compressor in use, inflating a car tire.
Digital display of the ACEZUK M06 showing real-time tire pressure.
Figure 5: The large LCD screen displays real-time tire pressure and battery level.

Video 3: Instructions on how to inflate a tire using the device.

4.3 Выкарыстанне ў якасці паўэрбанка

The ACEZUK M06 can charge your electronic devices:

  1. Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
  2. Прылада аўтаматычна пачне зараджаць падлучаную прыладу.
ACEZUK M06 acting as a power bank, charging multiple devices.
Figure 6: The device charging a smartphone and a smartwatch.

4.4 Выкарыстанне святлодыёднага святла

The integrated LED light provides illumination for various situations:

  1. Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
  2. Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
  3. An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.
Various uses of the ACEZUK M06 LED light, including night repair, outdoor emergencies, night reading, and campінж.
Figure 7: The 600 lumens LED light offers multiple modes for different scenarios.

5. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:

  • захоўванне: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
  • Перазарадка: If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
  • Уборка: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
  • Сыход за кабелем: Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.

6. Выпраўленне непаладак

If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:

праблемаМагчымая прычынаРашэнне
Прылада не ўключаецца.Нізкі зарад батарэі або адсутнасць зарада.Charge the device fully using the provided USB-C cable and a suitable adapter.
Транспартны сродак не заводзіцца.Incorrect cable connection, severely discharged battery, or vehicle issue.Пераканайцеся, што клamps are connected correctly (red to +, black to -). Check if the smart cable indicator light is solid green. If not, use the forced start function. If the issue persists, the vehicle battery might be beyond jump-starting or there's another vehicle problem.
Паветраны кампрэсар не напаўняе паветра.Hose not securely connected, incorrect pressure setting, or low device battery.Verify the air pump hose is tightly connected to the tire valve. Ensure a target pressure is set. Check the device's battery level and recharge if necessary.
Air compressor overheats.Continuous operation without cooling.Stop the inflation process and allow the compressor to cool down for several minutes before resuming. Avoid prolonged continuous use.
Няправільныя паказанні ціску.Incorrect unit of measurement selected.Press the 'U' (Unit) button to cycle through and select the correct pressure unit (PSI, BAR, KPA).

7. Тэхнічныя характарыстыкі

  • Марка: АЦЭЗУК
  • мадэль: М06
  • Пік току: 6000 Ampэрэс
  • Ёмістасць батарэі: 21800 мАг (літый-іённы)
  • Тып абслугоўвання аўтамабіля: Automotive (All Gas, up to 12.0L Diesel)
  • тtage: 12 вольт
  • Air Compressor Pressure: 0-150 PSI
  • Расход паветра: 50 LPM (1.76 CFM)
  • Уваход Type-C: 5В/3А, 9В/2А
  • Выхады USB: Двайны 5V/3A
  • Святлодыёдны святло: 600 Lumens (3 modes: Light/Strobe/SOS)
  • Працоўная тэмпература: -20°C да 60°C
  • Вага прадукту: 1.57 кг
  • Памеры ўпакоўкі: 21.1 х 17.3 х 14.4 см

8. Гарантыя і падтрымка

ACEZUK is committed to providing high-quality products and excellent customer service.

  • Гарантыя: This product comes with a 2-year FREE warranty from the date of purchase.
  • Тэхнічная падтрымка: Lifetime technical support is available for all ACEZUK M06 users.
  • Абслугоўванне кліентаў: Our customer service team is available 24/7 to assist you with any questions or concerns.

For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK webсайт для рэсурсаў падтрымкі.