1. Уводзіны
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Fanvil 8-Port 2-Wire PoE Switch (Model PN8). Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
2. Прадукт скончыўсяview
The Fanvil PN8 is an 8-port 2-wire Power over Ethernet (PoE) switch designed to transmit both power and data over existing 2-wire cables. This unique capability simplifies installation, especially in environments where traditional Ethernet cabling is not feasible or cost-effective. It supports up to 8 PoE-enabled devices and can transmit data and power over distances up to 300 meters.
2.1 Асноўныя магчымасці
- 8 PoE ports for data and power transmission.
- Supports power and data over 2-wire connections.
- Long transmission distance of up to 300 meters.
- User-friendly setup with no complex configuration required.
2.2 Макет прылады

Малюнак 1: Фронт view of the Fanvil PN8 switch, showing 8 PLC ports, a WAN port, ON/OFF switch, and LED indicators for Network Reset and Power.

Малюнак 2: Вуглавы view of the Fanvil PN8 switch, highlighting the side ventilation and port layout.
2.3 Святлодыёдныя індыкатары
- Network Reset (Green LED): Indicates network activity or status. A steady light typically means a stable connection, while blinking indicates data transmission.
- Power (Red LED): Illuminates when the device is powered on and receiving electrical current.
3. Інструкцыі па ўсталёўцы
3.1 Змест пакета
Перад устаноўкай пераканайцеся, што ўсе элементы прысутнічаюць у камплекце:
- Fanvil 8-Port 2-Wire PoE Switch (PN8)
- Адаптар сілкавання
- Кіраўніцтва карыстальніка (гэты дакумент)
- Аксэсуары для мантажу (калі ўваходзяць у камплект)
3.2 Падключэнне камутатара
- Падключэнне сілкавання: Connect the provided power adapter to the power input port on the switch and then plug it into a standard electrical outlet (100-240V AC). Ensure the ON/OFF switch is in the OFF position before connecting power.
- Падключэнне да глабальнай сеткі: Connect your main network router or modem to the WAN port on the Fanvil PN8 switch using a standard Ethernet cable.
- Падключэнне прылады PoE: Connect your 2-wire PoE-enabled devices (e.g., IP phones, cameras) to any of the 8 PLC ports on the switch. The switch will automatically detect and provide power and data to these devices.
- Уключэнне: Flip the ON/OFF switch to the ON position. The Power LED should illuminate, indicating the switch is operational.
4. Кіраванне перамыкачом
Once connected, the Fanvil PN8 switch operates automatically. It provides power and data to connected PoE devices without requiring additional configuration. The LED indicators provide visual feedback on the device's status.
4.1 Уключэнне/выключэнне
- To power on the switch, ensure the power adapter is connected and flip the ON/OFF switch to the 'ON' position. The red Power LED will light up.
- To power off the switch, flip the ON/OFF switch to the 'OFF' position. The red Power LED will turn off.
5. Тэхнічнае абслугоўванне
To ensure optimal performance and longevity of your Fanvil PN8 switch, follow these maintenance guidelines:
- Уборка: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
- Вентыляцыя: Ensure the switch is placed in a well-ventilated area. Do not block the ventilation openings on the sides of the device.
- Асяроддзе: Avoid exposing the switch to extreme temperatures, high humidity, or direct sunlight.
6. Выпраўленне непаладак
If you encounter issues with your Fanvil PN8 switch, refer to the following table for common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| No power (Power LED off) | Power adapter not connected or faulty; ON/OFF switch is off. | Check power adapter connection and outlet. Ensure ON/OFF switch is in the 'ON' position. |
| Няма падключэння да сеткі | WAN cable disconnected; faulty cable; upstream network issue. | Verify WAN cable connection. Test with a different cable. Check your router/modem. |
| PoE device not receiving power/data | Device not PoE-compatible; faulty 2-wire cable; device drawing too much power. | Ensure device is PoE-compatible. Test with a different 2-wire cable. Check device power requirements. |
| Нізкая хуткасць сеткі | Якасць кабеля; перагрузка сеткі; абмежаванні прылады. | Ensure high-quality 2-wire cables are used. Reduce network traffic if possible. |
7. Тэхнічныя характарыстыкі
| Спецыфікацыя | Каштоўнасць |
|---|---|
| Нумар мадэлі | PN8 |
| Тып прадукту | 2-Wire PoE Switch |
| Парты | 8 |
| Уваходны кнtage | 100~240 В пераменнага току |
| Аперацыйная Voltage | 28 вольт |
| Вялікая адлегласць перадачы | 300 метраў |
| Памеры прадукту | 5.91 х 78.74 х 5.91 цалі |
| Вага прадмета | 2.49 фунта |
| Патрабуюцца батарэі | 1 батарэйкі тыпу ААА (у камплекце) |
| ASIN | B0DP5HXVQJ |
| UPC | 6937295605105 |
| Дата першай даступнасці | 27 лістапада 2024 г |
8. Гарантыя і падтрымка
Каб атрымаць інфармацыю аб гарантыі і тэхнічнай падтрымцы, звярніцеся да дакументацыі, якая пастаўляецца з пакупкай, або наведайце афіцыйны сайт Fanvil. website. Contact their customer service for assistance with product issues, repairs, or further inquiries.