TOOLCY 3400 PSI Gas Pressure Washer (Model RM) Instruction Manual

1. Уводзіны

Thank you for choosing the TOOLCY 3400 PSI Gas Pressure Washer. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new pressure washer. Please read this manual thoroughly before operating the unit and keep it for future reference.

This powerful gas pressure washer is designed for tough cleaning jobs, delivering 3400 PSI and 2.8 GPM, powered by a 212cc 4-stroke engine. It is suitable for cleaning driveways, siding, patios, decks, fences, and vehicles.

Figure 1: TOOLCY 3400 PSI Gas Pressure Washer

2. Важная інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Прачытайце ўсе папярэджанні і інструкцыі па бяспецы. Невыкананне папярэджанняў і інструкцый можа прывесці да паразы электрычным токам, пажару і/або сур'ёзных траўмаў.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and protective clothing.
• Ніколі не накіроўвайце распыляльнік на людзей, хатніх жывёл або электрычныя разеткі.
• Перад запускам прылады пераканайцеся, што ўсе злучэнні надзейныя.
• Operate the pressure washer in a well-ventilated area to avoid carbon monoxide poisoning.
• Do not operate the unit on slopes exceeding 20 degrees, as this may trigger the oil sensor protector.
• Do not touch the high-pressure hose to hot surfaces such as the muffler and water pump.
• Always turn off the engine and relieve pressure before performing any maintenance or changing accessories.

3. Змесціва ўпакоўкі

Your TOOLCY Gas Pressure Washer package includes the following items:

• Gas Pressure Washer Unit (pre-assembled)
• Ergonomic Spray Gun with Swivel Connector
• High-Quality Metal Extension Wand
• 35-Foot High-Pressure Hose
• 5 Quick-Connect Nozzle Tips (0°, 15°, 25°, 40°, Soap)
• Масляны варонка
• Кіраўніцтва па эксплуатацыі

Малюнак 2: Камплектуючыя прыналежнасці

4. зборка

Your TOOLCY Gas Pressure Washer comes mostly pre-assembled for quick setup. Follow these steps to complete the assembly:

1. Прымацаваць ручку: Slide the upper handle assembly onto the main unit's frame until it clicks into place. No bolts or tools are required for this step.
2. Install Hose Hook: Attach the hose hook to the designated slots on the handle panel.
3. Падключэнне шланга высокага ціску: Connect one end of the 35-foot high-pressure hose to the pump outlet on the pressure washer unit and the other end to the spray gun. Ensure connections are hand-tightened securely.
4. Прымацуйце падаўжальнік: Screw the metal extension wand onto the spray gun.
5. Insert Nozzle Tip: Select the desired quick-connect nozzle tip and insert it into the end of the extension wand until it locks into place.

Video 1: TOOLCY Gas Powered Pressure Washer Unboxing and Assembly Guide. This video demonstrates the simple assembly process, highlighting the quick-connect features and ease of setup.

5. Пачатковая налада

1. Дадайце маторнае масла: Using the provided oil funnel, add 10W-30 engine oil to the engine crankcase. Do NOT overfill. The unit is shipped without engine oil to prevent leaks during transit.
2. Дадаць паліва: Fill the fuel tank with fresh, unleaded gasoline.
3. Падключэнне водазабеспячэння: Connect a standard garden hose to the water inlet on the pressure washer pump. Ensure the garden hose is free of kinks and has a minimum diameter of 5/8 inch.
4. Уключыце падачу вады: Fully open the water faucet to ensure a steady flow of water to the pressure washer.
5. Выдаліце ​​паветра з сістэмы: Squeeze the trigger on the spray gun to purge air from the pump and hose. Continue until a steady stream of water flows from the nozzle.

Figure 3: High-Performance 212cc 4-Stroke OHV Engine

6. Інструкцыя па эксплуатацыі

1. Запусціце рухавік:
   • Павярніце выключальнік рухавіка ў становішча «ON».
   • Move the throttle lever to the 'LEFT' position.
   • Turn the fuel shut-off valve to the 'RIGHT' position.
   • Знайдзіце шнур і павольна пацягніце яго, пакуль не адчуеце супраціў. У гэты момант рэзка пацягніце, каб запусціць рухавік.
   • Once the engine starts, turn the choke lever to the 'RIGHT' position.
2. Выберыце сопла: Choose the appropriate quick-connect nozzle tip for your cleaning task. The 0° (red) nozzle provides a concentrated stream for tough stains, while the 40° (white) nozzle offers a wider spray for general cleaning. The black nozzle is for soap application.
3. Нанясенне мыйнага сродку (па жаданні): If using detergent, fill the 0.88-gallon onboard soap tank with pressure washer-safe detergent. Attach the black soap nozzle. The pressure washer will automatically mix the detergent with water at low pressure.
4. Пачаць уборку: Hold the spray gun firmly with both hands and maintain a safe distance from the surface being cleaned. Start spraying from a distance and move closer as needed, ensuring not to damage the surface.
5. Stop the Engine: To stop the engine, turn the engine switch to the 'OFF' position. Turn off the water supply and squeeze the spray gun trigger to release any remaining pressure.

Figure 4: 0° Nozzle for concentrated cleaning

Figure 5: 15° Nozzle for heavy moss removal

Figure 6: 25° Nozzle for blasting stains

Figure 7: 40° Nozzle for car washing

Figure 8: Soap Nozzle for detergent application

Video 2: TOOLCY 3400 PSI Gas Power Washer in Action. This video demonstrates the pressure washer's performance on various surfaces, including its swivel gun and 35ft hose.

7. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і аптымальную прадукцыйнасць вашай мыйкі высокага ціску.

7.1 Тэхнічнае абслугоўванне рухавіка

• Праверце ўзровень алею: Check the engine oil level before each use. The built-in Smart Oil Sensor protects the engine from low oil levels.
• Замяніць алей: Change the engine oil after the first 5 hours of use, then every 50 hours or annually.
• Паветраны фільтр: Рэгулярна чысціце або мяняйце паветраны фільтр, асабліва ў запыленых умовах.
• Свечка запальвання: Штогод правярайце і чысціце свечку запальвання. Пры неабходнасці замяняйце.

7.2 Тэхнічнае абслугоўванне помпы

• The reinforced axial-cam pump is designed to be maintenance-free.
• Зімоўка: In freezing temperatures, use a pump protector or antifreeze to prevent damage to the pump.

7.3 Агульнае тэхнічнае абслугоўванне

• Чыстыя сопла: Clear any blockages from the nozzle tips using the provided nozzle cleaning tool.
• Праверце шлангі: Regularly check the high-pressure hose and garden hose for kinks, cuts, or leaks. Replace damaged hoses immediately.
• захоўванне: Store the pressure washer in a clean, dry area, protected from extreme temperatures.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

TOOLCY is committed to delivering superior quality products. For warranty information, technical support, or to purchase replacement parts, please visit the official TOOLCY Store or contact customer service.

Інтэрнэт-крама: TOOLCY Store on Amazon

For additional assistance, refer to the FAQs section on the TOOLCY brand story page.