Dasqua 4710-1205 7 Piece 0-16-Inch Electronic Depth Gage Set User Manual

1. Уводзіны

This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.

Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.

2. Змесціва ўпакоўкі

Праверце наяўнасць усіх кампанентаў у камплекце:

• Electronic Depth Gage Unit
• Set of Measurement Rods (7 pieces)
• Чахол для захоўвання
• Гарантыйны ліст

Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.

3. Асноўныя магчымасці

• дазвол: 0.0005-inch / 0.01mm for precise measurements.
• Адпаведнасць стандартам: Manufactured in accordance with DIN863 standards.
• шпіндзель: Hardened, ground, and lapped for enhanced accuracy.
• Універсальнасць: Designed to accommodate a broad range of measurement applications.
• Дысплей: Large, digital display for clear and quick readings.
• Будаўніцтва: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
• Нулявы скід: Ability to reset to zero at any position for comparative depth measurements.

4. Інструкцыі па ўсталёўцы

4.1. Устаноўка батарэі

The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:

1. Locate the battery compartment cover on the back of the digital display unit.
2. Use a small screwdriver or coin to open the cover.
3. Устаўце новую батарэю CR2032 станоўчым (+) бокам уверх.
4. Надзейна заменіце крышку батарэйнага адсека.

4.2. Attaching Measurement Rods

Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.

1. Identify the threaded end of the measurement rod.
2. Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
3. Ensure the rod is securely attached and straight.

Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.

Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.

5. Інструкцыя па эксплуатацыі

5.1. Уключэнне/выключэнне харчавання

• Націсніце ВКЛ/ВЫКЛ кнопку для ўключэння прылады.
• Націсніце ВКЛ/ВЫКЛ button again to power off the device.

5.2. Unit Conversion (Inch/Millimeter)

• Націсніце мм/цаля button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.

5.3. Zero Setting

The zero-reset function allows for comparative measurements or setting a reference point.

1. Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
2. Націсніце НУЛЬ button. The display will show '0.000' or '0.00'.

5.4. Правядзенне вымярэнняў

1. Ensure the depth gage is zeroed on a reference surface.
2. Place the base of the depth gage firmly on the surface from which the depth is to be measured.
3. Lower the measurement rod into the hole or recess until its tip contacts the bottom.
4. Read the measurement directly from the digital display.

5.5. Функцыя ўтрымання

• Націсніце ТРЫМАЦЬ button to freeze the current reading on the display.
• Націсніце ТРЫМАЦЬ button again to release the reading and return to live measurement.

Малюнак 5.1: Падрабязны view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.

6. Тэхнічнае абслугоўванне

6.1. Уборка

• Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
• Для ўстойлівага бруду выкарыстоўвайце анучу, злёгку працёртуюampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
• Ensure no liquid enters the electronic components.

6.2. Захоўванне

• Store the depth gage in its protective case when not in use.
• Захоўвайце прыладу ў сухім месцы, удалечыні ад прамых сонечных прамянёў, экстрэмальных тэмператур і высокай вільготнасці.
• Пры працяглым захоўванні выміце батарэйку, каб прадухіліць уцечку.

6.3. Замена батарэі

Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.

7. Выпраўленне непаладак

• Дысплей пусты або цьмяны:
  Check battery installation. Replace the battery if necessary. Ensure the device is powered on.
• Няправільныя паказанні:
  Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached.
• Кнопкі не рэагуюць:
  Check battery level. If the issue persists after battery replacement, contact customer support.

8. Тэхнічныя характарыстыкі прадукту

Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.

9. Гарантыя і падтрымка

This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webсайт або каналы абслугоўвання кліентаў.