EMKE TLM04BTD-FRVC

EMKE Bathroom Mirror with Lighting

Model: TLM04BTD-FRVC

Марка: EMKE

1. Уводзіны

Thank you for choosing the EMKE Bathroom Mirror with Lighting. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions carefully before installation and retain them for future reference.

2. Інфармацыя па бяспецы

  • Заўсёды адключайце харчаванне з дапамогай галоўнага выключальніка перад устаноўкай або тэхнічным абслугоўваннем.
  • Устаноўка павінна выконвацца кваліфікаваным электрыкам у адпаведнасці з усімі мясцовымі электрычнымі нормамі.
  • Handle the mirror with care. The glass is tempered but can break if subjected to sharp impacts.
  • Do not attempt to modify the electrical components of the mirror.
  • Пераканайцеся, што паверхня для мацавання мае трывалую канструкцыю і можа вытрымаць вагу люстэрка.
  • Трымайце дзяцей далей ад месца ўстаноўкі.

3. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты ёсць у наяўнасці і не пашкоджаны.

  • EMKE Bathroom Mirror with Lighting (Model TLM04BTD-FRVC)
  • Мантажныя элементы (шрубы, дзюбелі для сцяны)
  • Кіраўніцтва па эксплуатацыі

4. Настройка і ўстаноўка

The EMKE Bathroom Mirror can be installed either horizontally or vertically. Choose the orientation that best suits your space.

Image showing the EMKE bathroom mirror installed horizontally and vertically.

Figure 4.1: Flexible Installation - Horizontal and Vertical Mounting Options

Этапы ўстаноўкі:

  1. Мера: Determine the desired mounting height and position for the mirror. Mark the drilling points accurately on the wall.
  2. адзнака: Use a level to ensure the marks are perfectly aligned for horizontal or vertical installation.
  3. Свердзел: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert wall anchors if necessary.
  4. Бяспечны: Insert screws into the wall anchors, leaving a small gap for the mirror's mounting brackets.
  5. Провад: Connect the mirror's electrical wiring to your household electrical supply. This step should be performed by a qualified electrician. Ensure power is disconnected before wiring.
  6. Збярыце: Carefully hang the mirror onto the secured screws. Ensure it is stable and level.
Six-step visual guide for mirror installation: Measure, Mark, Drill, Secure, Wire, Assemble.

Figure 4.2: Step-by-Step Installation Guide

Памеры:

The mirror measures approximately 31.5 inches (80 cm) in length and 23.6 inches (60 cm) in width, with a depth of 35 mm.

Diagram showing the dimensions of the mirror: 800mm length, 600mm width, and 35mm depth.

Figure 4.3: Mirror Dimensions

5. Інструкцыя па эксплуатацыі

Your EMKE Bathroom Mirror features intuitive touch controls for lighting and anti-fog functions.

5.1 Уключэнне/выключэнне і рэгуляванне яркасці

  • Уключэнне: Touch the power button on the mirror surface. The button will illuminate white when the mirror is on.
  • Выключэнне: Touch the power button again. The button will illuminate blue when the mirror is off.
  • Зацямненне: With the light on, press and hold the power button to adjust the brightness from 10% to 100%. Release the button when the desired brightness is reached. The mirror features a cool white light with a color temperature of 6500K.
Image illustrating the dimming function of the mirror, showing light intensity at 10%, 50%, and 100% brightness.

Figure 5.1: Light Dimming Function (10% to 100%)

5.2 Функцыя супраць запацявання

  • Activate Anti-Fog: Touch the dedicated anti-fog button on the mirror surface. This function operates independently for energy efficiency.
  • Clear Reflection: Once activated, the integrated heating plate ensures a clear reflection even in a humid bathroom environment.
Image showing a woman looking into a clear mirror with the anti-fog function active, despite a steamy bathroom environment.

Figure 5.2: Anti-Fog Function for Clear Reflection

5.3 Memory Function and Automatic Shut-Off

  • Функцыя памяці: The mirror remembers the last set brightness level and light color, restoring it upon reactivation.
  • Аўтаматычнае адключэнне: The mirror lighting will automatically turn off after 3 hours of inactivity to conserve energy.

5.4 Wall Switch Control

  • The mirror can be controlled via your home's wall switch, provided the mirror's touch power button is activated (mirror is in an 'on' state).
Image showing the mirror's touch controls and a separate wall switch, indicating that the mirror can be controlled by a wall switch when its touch button is active.

Figure 5.3: Flexible Control via Wall Switch (Wall switch not included)

6. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your EMKE Bathroom Mirror, follow these maintenance guidelines:

  • Ачыстка люстраной паверхні: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
  • Ачыстка рамы: Працярыце рамку мяккай губкайamp тканінай. Пазбягайце выкарыстання агрэсіўных хімічных рэчываў або абразіўных ачышчальнікаў, якія могуць пашкодзіць пакрыццё.
  • Электрычныя кампаненты: Do not attempt to clean or service the internal electrical components. If you suspect an issue, contact a qualified electrician.
  • Рэгулярны агляд: Periodically check the mounting hardware to ensure it remains secure.

7. Выпраўленне непаладак

If you encounter any issues with your EMKE Bathroom Mirror, refer to the following troubleshooting guide:

праблемаМагчымая прычынаРашэнне
Не гарыць святлоНяма крыніцы харчавання
Няспраўная праводка
Няспраўнасць сэнсарнага выключальніка		Check circuit breaker. Ensure proper electrical connection. If wiring is suspected, consult an electrician.
Anti-fog function not workingAnti-fog button not activated
Электрычная праблема		Ensure the anti-fog button is pressed. Check power supply.
Святло міргае або цьмянаеНестабільнае харчаванне
Налада зацямнення занадта нізкая		Check power connections. Adjust brightness using the touch switch.
Mirror does not respond to wall switchMirror's touch button is offEnsure the mirror's touch power button is activated (light is on or in standby mode).

8. Тэхнічныя характарыстыкі

  • Марка: ЭМКЕ
  • Нумар мадэлі: TLM04BTD-FRVC
  • Памеры прадукту: 31.5"Д х 23.62"Ш (80 см х 60 см)
  • Форма: Прамавугольны
  • Тып мацавання: Насценнае мацаванне
  • колер: Anti-fog+6500k (Cool White Light)
  • Каляровая тэмпература святла: 6500 тыс
  • Зацямненне: Yes (10% to 100%)
  • Асаблівасці: Anti-Fog, Touch Switch, Memory Function, Automatic Shut-Off (3 hours)
  • Вага прадмета: 16.94 фунта
  • Патрабуецца зборка: Не (патрабуецца ўстаноўка)
  • Уключаныя кампаненты: Люстэрка
Diagram showing the mirror's construction: energy-saving LED strip, high color reproduction mirror, 5mm tempered glass, and backlight with frosted glass edge.

Figure 8.1: Mirror Construction Details

9. Гарантыя і падтрымка

EMKE products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EMKE website. Please have your model number (TLM04BTD-FRVC) and purchase date available when contacting support.

© 2026 EMKE. Усе правы абаронены.