Zigbee Dimmer 2-CH Module User Manual

1. Уводзіны

This user manual provides detailed instructions for the installation, operation, and maintenance of the SAMOTECH Zigbee Dimmer 2-CH Module. This module is designed to integrate seamlessly with various Zigbee hubs, including Philips Hue, Home Assistant, Homekit, SmartThings, and Hubitat, allowing for smart control of lighting.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Electrical installation should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the device and connected equipment. Always disconnect power at the circuit breaker before performing any electrical work.

• Ensure the power supply is completely off before installation or maintenance.
• Праверыць выпtage and current ratings of the module are compatible with your electrical system and connected loads.
• Для правільнай працы гэтай прылады патрабуецца нулявы провад.
• Не падвяргайце прыладу ўздзеянню вільгаці або экстрэмальных тэмператур.
• Выконвайце ўсе мясцовыя электрычныя нормы і правілы.

3. Прадукт скончыўсяview

The SAMOTECH Zigbee Dimmer 2-CH Module is a compact in-wall device designed for smart lighting control. It supports resistive, capacitive, and inductive loads and features a soft start function. It can be installed in deep wall switch electrical boxes or behind ceiling roses.

Асноўныя характарыстыкі:

• ZigBee 3.0 protocol for reliable wireless communication.
• Compatible with popular Zigbee gateways (Philips Hue, Homekit, Echo Plus, Hubitat, Homeassistant).
• Wide input and output voltage дыяпазон: 100-240VAC.
• Supports various load types.
• Requires a neutral wire.
• Soft start function for extended bulb life.
• Supports self-forming Zigbee networks and find-and-bind mode.

Схема модуля:

Малюнак 3.1: SAMOTECH Zigbee Dimmer 2-CH Module. The image shows the compact white module with green screw terminals for input (AC 100-240V L, L, N, N) and output (OUT), a small antenna, a reset button, and labels including "zigbee certified product", "SM308-S", "SAMOTECH", "Ratings: 100-240V~, 50/60Hz MAX:4.8A / 1.4A", and "CE UK CA" markings.

4. Настройка і ўстаноўка

Важна: Ensure power is disconnected at the circuit breaker before proceeding with installation.

1. Праводка: Connect the module according to the provided wiring diagram (refer to product packaging or manufacturer's website for detailed diagrams). Ensure correct connection of Live (L), Neutral (N), and Output (OUT) wires. The module requires a neutral wire.
2. Размяшчэнне: For initial setup, place the device as close as possible to your Zigbee hub to ensure a strong signal for pairing.
3. Уключыць рэжым спалучэння:
   • For SM308/SM309 models: Press the reset button 5 times rapidly.
   • For SM314 models: Press the reset button twice. A blue LED flashing indicates the device is ready for pairing.
   • For MS104Z models: Turn the device on 5 times. A beep sound indicates the device is ready for pairing.
4. Pairing with Zigbee Hub:
   • Amazon Echo Plus/Echo Show 2nd Gen: Ask Alexa to "discover new devices."
   • Philips Hue: Add a new light through the Hue app: Settings -> Light setup -> Add light (SM308, SM309, SM314 only). Note: Pairing with Philips Hue may require a "Touch Link" procedure, where the module is brought very close to the Hue Bridge during pairing.
   • Other Compatible Zigbee Hubs (Home Assistant, Homekit, SmartThings, Hubitat): Follow your specific hub's instructions for adding new Zigbee devices.
5. Тэставанне: Once paired, test the dimmer functionality through your Zigbee hub's application or voice commands.

5. Інструкцыя па эксплуатацыі

Once the SAMOTECH Zigbee Dimmer Module is successfully installed and paired with your Zigbee hub, you can control your connected lights using the hub's interface, associated smart switches, or voice commands (if integrated with a voice assistant).

• Кіраванне ўключэннем/выключэннем: Use your Zigbee app or voice assistant to turn the connected lights on or off.
• Кантроль зацямнення: Adjust the brightness level of the connected lights through your Zigbee app's dimmer slider or specific voice commands (e.g., "Set brightness to 50%").
• Scene and Automation: Integrate the dimmer module into scenes, routines, or automations within your Zigbee ecosystem for advanced control based on schedules, sensor triggers, or other smart home events.
• Physical Switch Control: If a retractive (momentary) light switch is connected to the module's input (S1/COM), you can use it to toggle the lights on/off and, in some configurations, dim them by holding the switch.

6. Тэхнічнае абслугоўванне

The SAMOTECH Zigbee Dimmer Module requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Уборка: If necessary, gently wipe the module with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Абнаўленні прашыўкі: Periodically check your Zigbee hub's application for available firmware updates for the module. Updates can improve performance, add features, or fix bugs.
• Умовы навакольнага асяроддзя: Ensure the module is installed in a dry environment, away from direct sunlight, excessive heat, or moisture.
• Цыкл харчавання: If the module becomes unresponsive, try power cycling it by turning off the circuit breaker for a few seconds and then turning it back on.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

For warranty information and technical support, please refer to the official SAMOTECH webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для гарантыйных прэтэнзій.

Кантактная інфармацыя: Калі ласка, наведайце www.samotech.co.uk каб атрымаць найноўшыя рэсурсы падтрымкі і кантактную інфармацыю.