Уводзіны
The B22 Micro-Cut Document Shredder is designed for secure and efficient shredding in office environments. Featuring P-5 security level micro-cut technology, it ensures sensitive documents and credit cards are destroyed to high standards. This shredder is suitable for 1-5 users, offering continuous operation, anti-jamming technology, and quiet performance. Its compact design integrates well into any office space, providing a reliable tool for protecting sensitive information.
Важныя інструкцыі па бяспецы
Please read these instructions carefully before using the shredder. Failure to follow these instructions may result in injury or damage to the shredder.
- Трымайце рукі, валасы і свабодную вопратку далей ад шчыліны для ўводу паперы.
- Трымайце дзяцей і хатніх жывёл далей ад здрабняльніка.
- Do not insert more sheets than specified (9 sheets maximum).
- Не здрабняйце металічныя прадметы, вялікія скрепкі або клейкія этыкеткі.
- Unplug the shredder when not in use or before moving/cleaning.
- Не выкарыстоўвайце шрэдар, калі пашкоджаны шнур харчавання.
- Empty the waste bin regularly to prevent jams.
Што ў скрынцы
Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе кампаненты наяўныя:
- HSM Securio B22 Micro-Cut Document Shredder Unit
- Integrated Waste Bin with a 8.7-gallon capacity
- Шнур харчавання
- Кіраўніцтва карыстальніка (гэты дакумент)
Настройка
Распакоўка і размяшчэнне
Carefully remove the shredder from its packaging. Place the shredder on a flat, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and easy access to the waste bin.
Image: The HSM Securio B22 Micro-Cut Document Shredder, showing its compact design and waste bin access.
Installing the Waste Bin
Ensure the integrated 8.7-gallon waste bin is correctly seated within the shredder unit. The shredder will not operate if the bin is not properly inserted.
Падключэнне сілкавання
Plug the power cord into the shredder's power inlet, then plug the other end into a standard electrical outlet (120 V / 60 Hz). The shredder is now ready for operation.
Інструкцыя па эксплуатацыі
Уключэнне/выключэнне
Locate the power switch, typically on the top or back of the shredder. Set it to the "ON" position to activate the shredder. To turn off, set the switch to "OFF". For extended periods of non-use, unplug the shredder from the wall outlet.
Знішчэнне дакументаў
Insert paper, staples, or paper clips into the paper entry slot. The shredder will automatically start shredding. Do not exceed the maximum sheet capacity of 9 sheets per pass to prevent jams. For credit cards, insert them one at a time into the designated slot (if separate) or the main paper entry slot.
Бесперапынная праца
This shredder is designed for continuous operation, allowing for extended shredding sessions without overheating. However, it is always good practice to monitor the shredder's performance and empty the bin when full.
Anti-Jamming Technology
The shredder is equipped with anti-jamming technology. If a paper jam occurs, the shredder may automatically reverse to clear the jam. If it does not clear automatically, switch the shredder to reverse mode (if available) or turn it off, unplug it, and carefully remove the jammed paper.
Ціхая праца
The B22 Micro-Cut Shredder operates quietly, minimizing disruption in office environments. This feature allows for comfortable use even during busy work hours.
Тэхнічнае абслугоўванне
Апарашчэнне кантэйнера для смецця
Regularly check and empty the 8.7-gallon waste bin to prevent overfilling and potential paper jams. The shredder may stop operating when the bin is full.
Уборка
Unplug the shredder before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents. Periodically clean the paper entry area to remove any paper dust or debris.
Oiling the Shredder Blades (Recommended)
To maintain optimal performance and extend the life of your shredder, it is recommended to oil the cutting blades regularly, especially after emptying the waste bin or after heavy use. Use a shredder-specific oil. Apply a thin line of oil across the paper entry slot, then run a few sheets of paper through the shredder to distribute the oil.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Шрэдар не ўключаецца. | Not plugged in; power switch off; waste bin not properly inserted; overheating. | Ensure power cord is securely plugged in. Turn power switch to "ON". Re-insert waste bin correctly. Allow shredder to cool down for 30 minutes if it has been used continuously. |
| Замяцце паперы. | Too many sheets inserted; paper not inserted straight; bin is full. | Reduce the number of sheets. Insert paper straight. Empty the waste bin. Use the reverse function to clear the jam. If necessary, unplug and carefully remove paper. |
| Шрэдар шумны. | Ляза патрабуюць змазкі; у лязах ёсць староннія прадметы. | Oil the shredder blades as per maintenance instructions. Unplug the shredder and carefully inspect the blades for any foreign objects. |
| Шрэдар спыняецца падчас працы. | Waste bin full; overheating; safety sensor triggered. | Empty the waste bin. Allow the shredder to cool down. Check if the bin is properly seated and if any safety sensors are obstructed. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Памеры прадукту | 12.2 х 14.76 х 23.62 цалі |
| Вага прадмета | 35 фунта |
| ASIN | B0DT4MSDMF |
| Нумар мадэлі тавару | Securio B22 Micro-Cut |
| Дата першай даступнасці | 15 студзеня 2025 г |
| Вытворца | HSM |
| Краіна паходжання | Нямеччына |
| Тып разрэзу | Micro Cut |
| Марка | Радавыя |
| Ёмістасць | 8.7 Gallons (Bin) |
| Асаблівасць | Ціхая праца |
| Стандартная ёмістасць лістоў | 9 лістоў |
| Узровень бяспекі | P-5 (DIN 66399: E-4 | F-2 | P-5 | T-5) |
| Памер драбнення | 1/16 х 5/8 цалі |
| Shreddable Materials | Папера, скобы, скрепкі, крэдытныя карты |
| Час выканання | Бесперапынны |
| хуткасць | 17.7 футаў/мін |
| Шырыня горла | 9.45 цаляў |
| Энергаспажыванне | 440 ват |
| тtage/Частата | 120 В / 60 Гц |
Інфармацыя аб гарантыі
This 1832 Model B22 Micro-Cut Document Shredder comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your purchase receipt as proof of purchase for warranty claims.
Падтрымка кліентаў
For technical assistance, troubleshooting, or warranty inquiries, please contact the manufacturer's customer support. Refer to the contact information provided on the product packaging or the manufacturer's official website. When contacting support, please have your model number (Securio B22 Micro-Cut) and ASIN (B0DT4MSDMF) ready.
Для атрымання дадатковай інфармацыі вы можаце наведаць старонка прадукту на Amazon.