JHS Pedals COLOUR BOX 10 Instruction Manual

Уводзіны

The JHS Pedals COLOUR BOX 10 is a studio-quality preamp, EQ, and distortion unit designed for compatibility with various instruments. This manual provides detailed instructions for its setup, operation, and maintenance.

Змест пакета

Перад тым, як працягнуць наладу, пераканайцеся, што ўсе элементы ёсць у наяўнасці:

• COLOUR BOX 10 Pedal
• Пераключальнік ўваходу
• Сілавы кабель

Асноўныя характарыстыкі

• Incorporates an Output Transformer for enhanced signal integrity.
• Safely Handles 48V Phantom Power, suitable for condenser microphones.
• Precision EQ Control with dedicated EQ Shift Knobs for detailed tone shaping.
• Ultra Clean Headroom with Hi/Lo Switch for versatile gain stagінж.
• Consistent Clean Signal on Acoustic Guitar, preserving natural tone.
• Silent Operation, No Switch-Pop, ensuring smooth performance transitions.
• Powered by Standard 9V DC Negative Power for easy integration into existing setups.

Элементы кіравання і сувязі

The COLOUR BOX 10 features a comprehensive set of controls for precise sound sculpting. Refer to the image below for a visual guide to the pedal's layout.

Малюнак 1: Верх view of the JHS Pedals COLOUR BOX 10, showing all control knobs and switches.

Ручкі кіравання:

• Майстар: Рэгулюе агульную гучнасць выхаднога гуку педалі.
• Pre-Vol: Adjusts the input gain, influencing the amount of saturation and distortion.
• крок: A stepped gain control that adds distinct stages of gain and color to the signal.
• Hi Pass: Controls the cutoff frequency for the high-pass filter. Turning clockwise increases the cutoff frequency, removing more low-end.
• Высокія частоты: Adjusts the high-frequency equalization.
• Сярэдні: Adjusts the mid-frequency equalization.
• Бас: Adjusts the low-frequency equalization.
• Зрух высокіх частот: Shifts the center frequency of the Treble EQ band.
• Mid Shift: Shifts the center frequency of the Middle EQ band.
• Bass Shift: Shifts the center frequency of the Bass EQ band.

Пераключальнікі:

• Hi Pass Toggle Switch: Activates or deactivates the Hi Pass filter.
• Hi/Lo Toggle Switch: Selects between high and low headroom modes, affecting the overall gain structure and clean signal.

Сувязі:

• Input (1/4" TRS): Connect your instrument or microphone.
• Output (XLR): Connect to an audio interface, mixer, or ampзадымнік.
• Уваходнае сілкаванне 9 В пастаяннага току: Connect a standard 9V DC negative center power supply.

Кіраўніцтва па ўстаноўцы

1. Падключэнне сілкавання: Connect the provided 9V DC power cable to the pedal's power input. Ensure you use a standard 9V DC negative center power supply.
2. Instrument/Microphone Input: Connect your instrument (e.g., guitar, bass) or microphone to the 1/4" TRS input jack. If using a microphone requiring phantom power, the COLOUR BOX 10 can safely handle 48V phantom power.
3. Выходнае злучэнне: Connect the XLR output of the COLOUR BOX 10 to your audio interface, mixing console, or ampзадымнік.
4. Пачатковыя налады: Before powering on, set all control knobs to their middle position (12 o'clock) and ensure both toggle switches are in their neutral or 'off' position (if applicable, for Hi Pass).
5. Уключэнне: Apply power to the pedal. The indicator LED should illuminate.

Інструкцыя па эксплуатацыі

The COLOUR BOX 10 offers extensive tonal possibilities. Experiment with the controls to find your desired sound.

Гайн СtagING:

• Выкарыстоўвайце Pre-Vol knob to adjust the initial gain. Higher settings will introduce more saturation and distortion.
• The Крок knob provides incremental gain stages, adding character and drive.
• The Прывітанне/Ло toggle switch selects between two headroom settings. 'Hi' offers more clean headroom, while 'Lo' provides earlier breakup and compression.

Выраўноўванне:

• Адрэгулюйце Высокія частоты, Сярэдні, і Бас knobs to shape your tone.
• Выкарыстоўвайце Treble Shift, Mid Shift, і Bass Shift knobs to fine-tune the frequency centers of each EQ band, allowing for precise tonal adjustments.
• The Прывітанне Пас filter, activated by its toggle switch, can be used to remove unwanted low-end rumble or to tighten up your sound. Adjust the Прывітанне Пас knob to set the cutoff frequency.

Узровень выхаднога сігналу:

The Майстар knob controls the final output volume. Adjust this to match the input level of your next device in the signal chain.

Тэхнічнае абслугоўванне

• Уборка: Выкарыстоўвайце мяккую сухую тканіну для чысткі вонкавага боку педалі. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
• захоўванне: Store the pedal in a dry environment, away from extreme temperatures and humidity.
• крыніца харчавання: Always use the correct 9V DC negative center power supply to prevent damage.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information and technical support, please refer to the official JHS Pedals webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.

JHS Pedals Official Webсайт: www.jhspedals.com