LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

1. Уводзіны

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. Інфармацыя па бяспецы

• Электрабяспека: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
• тtage: This product operates on 220 Volts. Verify your power supply matches this requirement.
• Рэйтынг IP65: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
• Цяпло: Do not cover the spotlight during operation, as this may cause overheating.
• Не зацямняецца: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
• Крыніца святла: The LED light source is not replaceable. If the light source fails, the entire luminaire must be replaced.

3. Змесціва ўпакоўкі

Калі ласка, праверце ўпакоўку, каб пераканацца ў наяўнасці ўсіх кампанентаў:

• LEDVANCE 17W 2400LM LED Spotlight unit
• Мантажны кранштэйн
• Screws and wall anchors (may vary by region)
• Кіраўніцтва па эксплуатацыі

4. Настройка і ўстаноўка

Выканайце наступныя дзеянні для правільнай ўстаноўкі:

4.1 Перад устаноўкай

• Выключэнне: Пераканайцеся, што асноўнае электразабеспячэнне зоны ўстаноўкі адключана аўтаматычным выключальнікам.
• Выбар месцазнаходжання: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
• Dimensions Check: Refer to the product dimensions to ensure adequate space for installation.

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view shows a width of 157 mm, and the side view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 Мантаж

1. Position the mounting bracket on the desired surface and mark the drilling points.
2. Прасвідруйце адтуліны ў пазначаных месцах і пры неабходнасці ўстаўце ў сцяну анкеры.
3. Замацуйце мантажны кранштэйн да паверхні з дапамогай прадугледжаных шруб.
4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 Электраправодка

• Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
• Properly insulate all connections to prevent short circuits and ensure safety.
• Пасля таго, як праводка будзе завершана і надзейна падключана, аднавіце электраэнергію да ланцуга.

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. Інструкцыя па эксплуатацыі

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

• Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
• Датчык руху: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
• Карэкціроўкі: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. Тэхнічнае абслугоўванне

The LEDVANCE spotlight requires minimal maintenance.

• Уборка: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
• агляд: Regularly inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly.
• Няма частак, якія абслугоўваюцца карыстальнікам: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7. Выпраўленне непаладак

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

This LEDVANCE spotlight comes with a Гарантыя 5 год з дня пакупкі. Гэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры звычайным выкарыстанні.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.