Tyger Auto Tyger Access Running Boards Instruction Manual

1. Прадукт скончыўсяview

The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.

This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.

Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.

2. Інфармацыя аб камплектацыі

These running boards are specifically designed for:

• Транспартны сродак: Toyota Tacoma 2024-2026 гг
• Тып кабіны: Double Cab (4 full-size doors)
• Сумяшчальнасць: Includes Hybrid models

Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.

Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.

3. Настройка і ўстаноўка

3.1. Уключаныя кампаненты

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• Падножка з боку кіроўцы
• Падножка з боку пасажыра
• All necessary hardware and mounting brackets
• Кіраўніцтва па ўстаноўцы (гэты дакумент)

3.2. Этапы ўстаноўкі

Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.

1. Падрыхтуйце аўтамабіль: Прыпаркуйце аўтамабіль на роўнай паверхні і ўключыце стаяначны тормаз.
2. Вызначце кропкі мацавання: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
3. Далучыць дужкі: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
4. Пазіцыя на бегавой дошцы: Carefully lift and align the running board with the attached brackets.
5. Secure Running Board: Attach the running board to the brackets using the remaining hardware.
6. Адрэгуляваць і зацягнуць: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
7. Паўтарыце для іншага боку: Follow the same steps for the opposite side of the vehicle.

Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.

4. Інструкцыя па эксплуатацыі

The Tyger Access Running Boards are designed for straightforward use. To operate:

• Ensure the running boards are securely installed before use.
• When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
• The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.

Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.

5. Тэхнічнае абслугоўванне

To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:

• Рэгулярная ўборка: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• агляд: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
• Абарона аздаблення: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.

Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.

6. Выпраўленне непаладак

Калі ў вас узніклі праблемы з падножкамі, звярніце ўвагу на наступнае:

• Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
• Незвычайныя шумы: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
• Цяжкасці ўстаноўкі: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).

Калі гэтыя дзеянні не дазволяць вырашыць праблемы, звярніцеся ў службу падтрымкі кліентаў.

7. Тэхнічныя характарыстыкі

Image 7.1: Detailed dimensions of the Tyger Access Running Board.

Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.

8. Інфармацыя аб гарантыі

Tyger Auto provides a Гарантыя 5 год for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

9. Падтрымка

For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto webсайт або звярніцеся ў аддзел абслугоўвання кліентаў праз прадаўца, у якога быў набыты прадукт.

Больш падрабязную інфармацыю і кантактныя дадзеныя вы можаце знайсці на Tyger Auto Store on Amazon.