Уводзіны
This manual provides comprehensive instructions for the safe and effective use of your AZZORI BD613 Electric Foot Callus Remover. This rechargeable device is engineered to gently and efficiently remove calluses and rough skin, contributing to smoother and softer feet. Its compact and ergonomic design ensures comfortable handling and portability for both daily foot care and travel.
Што ўключана
Your AZZORI BD613 Electric Foot Callus Remover package contains the following items:
- 1 x Electric Foot Callus Remover Device
- 1 x Coarse Roller Head
- 1 x Fine Roller Head
- 1 х пылаахоўны каўпачок
- 1 х USB-кабель для зарадкі
- 1 х Інструкцыя па эксплуатацыі
Асноўныя характарыстыкі
- Рэгуляваныя рэжымы хуткасці: Offers two speed settings at 1700 rpm and 2000 rpm for customized exfoliation.
- Dual Hardness Roller Set: Includes both a coarse roller for significant callus removal and a fine roller for smoothing and polishing.
- Эрганамічны дызайн: Compact and comfortable to hold, allowing for easy treatment at various angles.
- Убудаваны святлодыёдны святло: Illuminates the treatment area for improved visibility during use.
- Акумулятарная батарэя: Equipped with a long-lasting Lithium-Ion battery for cordless operation.
- USB-зарадка: Conveniently charges via laptop, power bank, or a 5V-1A adapter.
Інфармацыя па бяспецы
- Do not use the device on wet feet. Ensure feet are completely dry before use.
- Avoid applying excessive pressure to the skin. Gentle application is sufficient for effective removal.
- Keep the device away from water during operation to prevent electrical hazards.
- Discontinue use immediately if you experience any pain, irritation, or discomfort.
- Не выкарыстоўвайце на пашкоджанай, раздражнёнай або інфікаванай скуры.
- Захоўваць у месцах, недаступных дзецям.
Настройка
Зарадка прылады
Before first use, fully charge the device. Connect the provided USB charging cable to the device and a compatible power source such as a laptop, power bank, or a 5V-1A adapter. The LED indicator will show charging status.
Attaching/Replacing Roller Heads
To attach or replace a roller head:
- Press the release button located on the side of the device to unlock the head.
- Gently pull the current roller head off the device.
- Select the desired roller (coarse or fine) and align it with the slot.
- Place the new head into the slot and press the button on top of the head.
- Gently press the head until you hear a soft click, indicating it is securely in place.
Інструкцыя па эксплуатацыі
Follow these steps for effective callus removal:
- Ensure your feet are clean and completely dry before starting.
- Select the appropriate roller (coarse for thick calluses, fine for smoothing) and ensure it is securely attached.
- Turn on the device using the power switch and select your desired speed mode (1700 rpm or 2000 rpm). An LED light will illuminate.
- Gently apply the rotating roller to the affected area of your foot, moving it in circular motions. Do not press too hard; let the device do the work.
- Continue until the desired smoothness is achieved. Avoid using on one area for too long to prevent irritation.
- Пасля выкарыстання выключыце прыладу.
Тэхнічнае абслугоўванне
Cleaning the Device and Rollers
Рэгулярная чыстка забяспечвае аптымальную прадукцыйнасць і гігіену:
- After each use, remove the roller head as described in the Setup section.
- Rinse the roller head under running water to remove any skin debris. Do not immerse the main device body in water.
- Use the provided cleaning brush (if included, otherwise a small brush) to remove any stubborn particles from the roller.
- Allow the roller head to air dry completely before reattaching it to the device or storing.
- Wipe the main body of the device with a clean, dry cloth.
Захоўванне
Store the device in a cool, dry place, away from direct sunlight and moisture. Ensure the dust cap is placed over the roller head when not in use to protect it.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Прылада не ўключаецца | Нізкі акумулятар або не зараджаны | Поўнасцю зарадзіце прыладу з дапамогай USB-кабеля, які ўваходзіць у камплект. |
| Roller stops spinning during use | Ужываецца празмерны ціск | Reduce pressure on the skin. The device is designed to stop if too much force is applied to prevent injury. |
| Ineffective callus removal | Incorrect roller head or worn-out roller | Ensure you are using the appropriate roller (coarse for tougher areas). Replace the roller head if it appears worn. |
| Раздражненне скуры пасля выкарыстання | Used on wet/damaged skin or excessive use | Ensure feet are dry. Do not use on broken or irritated skin. Limit usage time per area. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | BD613 |
| Памеры прадукту | 7.5 х 1.4 х 1.4 цалі |
| Вага прадмета | 4.2 унцыі |
| Тып батарэі | 1 літый-іённы акумулятар (у камплекце) |
| Рэжымы хуткасці | 1700 абароты ў хвіліну, 2000 абаротаў у хвіліну |
| Сумяшчальнасць з зарадкай | USB (laptop, power bank, 5V-1A adapter) |
| Вытворца | Pingyang Jihao Home Furnishings Factory |
Гарантыя і падтрымка
For warranty information or product support, please refer to the contact details provided with your purchase documentation or visit the official AZZORI webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.