ORGBRO Power Adapter User Manual

Уводзіны

This manual provides essential instructions for the safe and effective use of your ORGBRO Power Adapter, specifically designed for the Z1 Thermal Shipping Label Printer. Please read this manual thoroughly before using the product and retain it for future reference.

Інфармацыя па бяспецы

• Ensure the power adapter is used with the specified ORGBRO Z1 Thermal Shipping Label Printer only.
• Не падвяргайце адаптар уздзеянню вады, вільгаці або экстрэмальных тэмператур.
• Пазбягайце падзення адаптара або яго моцных удараў.
• Не спрабуйце адкрываць, мадыфікаваць або рамантаваць адаптар. Звяртайцеся да кваліфікаванага персаналу па любыя паслугі па абслугоўванні.
• Always unplug the adapter from the power outlet before cleaning or if it will be unused for an extended period.
• Захоўваць у месцах, недаступных дзецям.

Змест пакета

Please check the package contents upon receipt. The package should contain:

• 1 x ORGBRO Power Adapter (for Z1 Thermal Shipping Label Printer)

Настройка

1. Вызначце адаптар: Locate the ORGBRO Power Adapter. It features a standard AC plug on one end and a DC connector on the other.
2. Падключэнне да прынтара: Insert the DC connector end of the power adapter firmly into the power input port on your ORGBRO Z1 Thermal Shipping Label Printer. Ensure a secure connection.
3. Падключыце да разеткі: Plug the AC end of the power adapter into a standard electrical wall outlet (100-240V~50/60Hz).
4. Праверце злучэнне: Once connected, the printer should receive power, indicated by its power indicator light (refer to your Z1 printer manual for specific light behavior).

Image: The ORGBRO Power Adapter with its DC connector ready to be plugged into the Z1 Thermal Shipping Label Printer.

Інструкцыя па эксплуатацыі

The ORGBRO Power Adapter is designed for continuous operation with your Z1 Thermal Shipping Label Printer. Once properly connected as described in the Setup section, the adapter will supply the necessary power to the printer.

• Ensure the printer's power switch is in the 'ON' position to begin operation.
• Always use the adapter in a well-ventilated area to prevent overheating.
• To power off the printer, first turn off the printer's power switch, then unplug the adapter from the wall outlet.

Тэхнічнае абслугоўванне

• Уборка: Disconnect the adapter from both the printer and the power outlet. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or sprays.
• захоўванне: Калі адаптар не выкарыстоўваецца, захоўвайце яго ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і вільгаці. Не змотвайце кабель туга, каб пазбегнуць пашкоджанняў.
• агляд: Periodically inspect the power cord and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is found, discontinue use immediately and replace the adapter.

Ліквідацыю непаладак

No Power to Printer

• Праверце злучэнні: Ensure the power adapter is securely plugged into both the Z1 printer and a working wall outlet.
• Тэставы выхад: Plug another device into the wall outlet to confirm it is supplying power.
• Праверце адаптар: Check the adapter cable and housing for any visible damage. If damaged, do not use.
• Printer Power Switch: Verify that the Z1 printer's power switch is in the 'ON' position.

If the issue persists after performing these checks, contact ORGBRO customer support for assistance.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

ORGBRO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ORGBRO website. If you encounter any issues or have questions about your ORGBRO Power Adapter, please contact ORGBRO customer support for assistance.

You can typically find contact information for support on the ORGBRO brand store page or through the retailer where the product was purchased.