Інструкцыя па эксплуатацыі прылады для праверкі ціску ў шынах LAUNCH X-431 i-TPMS

1. Уводзіны

The LAUNCH X-431 i-TPMS is a professional handheld tool designed for comprehensive Tire Pressure Monitoring System (TPMS) services. It supports activation, programming, relearn, and diagnosis of TPMS sensors, specifically compatible with LAUNCH 315/433MHz sensors. This manual provides detailed instructions for the proper use and maintenance of your i-TPMS device.

2. Прадукт скончыўсяview

The X-431 i-TPMS is a portable and user-friendly device. It can operate in two primary modes: bound with a LAUNCH X-431 diagnostic scanner or standalone via the i-TPMS mobile application. Its core functions include reading sensor ID, tire pressure, tire temperature, and battery status, as well as performing sensor activation, programming, and relearn procedures.

LAUNCH X-431 i-TPMS device held in hand, showing its screen and buttons.

Figure 2.1: LAUNCH X-431 i-TPMS device in operation.

2.1 Кампаненты прылады

Diagram of the LAUNCH X-431 i-TPMS device with labels for its components: Sensor Slot, Charging LED, Display Screen, UP Button, POWER Button, DOWN Button, OK (Confirm) Button, Charging Port.

Figure 2.2: Labeled components of the X-431 i-TPMS device.

Sensor Slot: Area for interacting with TPMS sensors.
Святлодыёд зарадкі: Паказвае стан зарадкі.
Экран дысплея: Shows operational information and menus.
Кнопка UP: Navigates menus upwards or increases values.
Кнопка харчавання: Уключае/выключае прыладу.
Кнопка ўніз: Navigates menus downwards or decreases values.
OK (Confirm) Button: Пацвярджае выбар або дзеянні.
Порт для зарадкі: Micro USB-порт для зарадкі прылады.

3. Настройка

3.1 Першапачатковая зарадка

Before first use, ensure the i-TPMS device is fully charged. Connect the device to a power source using the provided USB cable via the Charging Port. The Charging LED will indicate the charging status.

3.2 Уключэнне/выключэнне

Каб уключыць: націсніце і ўтрымлівайце Кнопка сілкавання пакуль экран не падсвечваецца.
Каб выключыць: націсніце і ўтрымлівайце Кнопка сілкавання пакуль прылада не выключыцца.

4. Інструкцыя па эксплуатацыі

The LAUNCH X-431 i-TPMS offers two modes of operation: binding with a compatible LAUNCH X-431 scanner or operating standalone with the i-TPMS mobile application.

4.1 Operation with LAUNCH X-431 Scanner

When bound with a LAUNCH X-431 scanner (8-inch screen or above), the i-TPMS can perform a full range of TPMS services including activation, programming, relearn, and diagnosis for sensors.

Diagram illustrating TPMS Activation, Relearn, Programming, and Diagnostic functions.

Малюнак 4.1: Закончанаview of TPMS functions available with an X-431 scanner.

Актывацыя: Read sensor ID, tire pressure, tire temperature, sensor battery, sensor position, and frequency.
Праграмаванне: Create new sensor IDs for LAUNCH sensors. Supports auto-creation for 1-16 sensors or manual input.
перавучыць: Perform Stationary Relearn, Automatic Relearn, or OBD Relearning procedures to link new sensor IDs to the vehicle's ECU.
Дыягназ: Read and clear TPMS fault codes.

4.2 Standalone Operation with i-TPMS Mobile App

The i-TPMS can also function independently when paired with the i-TPMS mobile application on an Android phone. This mode supports sensor activation and programming.

Replace Tire Pressure Sensor: Guide through the process of replacing a sensor.
Актываваць датчык: Initiate communication with the sensor to read its data.
Program Sensor ID: Create new sensor IDs.
Query Sensor OE Part Number: Retrieve original equipment part numbers for sensors.
Generate Tire Pressure Detection Reports: Create reports based on sensor data.

4.3 TPMS Sensor Programming

The i-TPMS allows for programming LAUNCH LTR RF sensors to replace original equipment (OE) sensors. This process can be done automatically or manually.

Screenshot showing the X-431 i-TPMS interface for Auto Create Sensor ID and Manual Create Sensor ID.

Figure 4.2: Sensor ID programming options.

Auto Create Sensor ID: If the original sensor ID is unknown, the i-TPMS can automatically generate a new ID.
Manual Create Sensor ID: Allows the user to manually input a specific sensor ID.

4.4 Працэдуры перанавучання сістэмы кантролю TPMS

After replacing or programming a sensor, a relearn procedure is necessary to ensure the vehicle's ECU recognizes the new sensor IDs.

Image showing the X-431 i-TPMS device near a tire, with text indicating OBD Relearn, Automatic Relearn, and Stationary Relearn options.

Figure 4.3: TPMS Relearn options.

Перанавучанне OBD: Connects to the vehicle's OBD-II port to transfer sensor IDs.
Аўтаматычнае перанавучанне: Sensors are automatically learned by driving the vehicle.
Стацыянарнае перавучванне: Requires specific steps to be performed while the vehicle is stationary.

4.5 Зчытванне і скіданне кодаў памылак

The i-TPMS can diagnose issues within the TPMS by reading and clearing diagnostic trouble codes (DTCs).

Image showing a car dashboard with a TPMS warning light on, then the i-TPMS device reading fault codes, and finally the warning light off after clearing codes.

Figure 4.4: Process of reading and clearing TPMS fault codes.

Зчытайце коды памылак: Access and display current and stored TPMS-related DTCs.
Ачысціць коды памылак: Erase DTCs from the vehicle's ECU after repairs or sensor replacements.

5. Сумяшчальнасць

5.1 Compatible LAUNCH X-431 Devices

The LAUNCH X-431 i-TPMS is designed to work with various LAUNCH X-431 intelligent diagnostic tools that feature an 8-inch or larger screen.

Image showing the X-431 i-TPMS device alongside several compatible LAUNCH X-431 scanner models, including X-431 V, V+, PADIII, PAD V, PRO5, PRO3S+, PRO ELITE, and PRO3S.

Figure 5.1: Compatible LAUNCH X-431 scanner models.

LAUNCH X-431 PRO
LAUNCH X-431 V/PRO V5.0
LAUNCH X-431 PRO TT/DYNO
LAUNCH X-431 PRO 3
LAUNCH X-431 PRO3S+/PRO3S+ V5.0
LAUNCH X-431 V+
LAUNCH X-431 PRO3 ACE/APEX
LAUNCH X-431 PAD III
LAUNCH X-431 PAD V
LAUNCH X-431 PAD VII

Заўвага: The i-TPMS requires a compatible LAUNCH diagnostic tablet (8-inch or above) for full functionality. It cannot be used for advanced functions if purchased separately without a compatible scanner.

5.2 Supported Vehicle Brands and Protocols

The i-TPMS supports over 98% of mainstream vehicles equipped with a TPMS system. For OBDII diagnostics, it is compatible with most cars built in 1996 or later, supporting various protocols:

ISO 14230-4 (KWP2000)
ISO 15765-4 (CAN)
ISO 9141-2 (ISO)
ISO 14229 (UDS)
SAE J1850 (VPW і ШІМ)
Арыгінальныя пратаколы розных вытворцаў

For advanced functions like active tests, all system diagnostics, and maintenance services, it covers approximately 95% of car models, including:

Азія: Daewoo, Honda, JP Isuzu, Kia, Mazda, Mitsubishi, Nissan, SGM, Subaru, Suzuki, Toyota, Hyundai, Ssangyong.
Еўропа: Aston Martin, Audi, Benz, BMW, Citroen, Ferrari, Fiat, Land Rover, Maserati, Opel, Porsche, Renault, Rover, Saab, Seat, Skoda, Smart, Sprinter, Volvo, VW, Peugeot.
Амерыка: Chrysler, USA-Ford, GM.

6. Тэхнічнае абслугоўванне

Уборка: Выкарыстоўвайце мяккі, damp тканінай для чысткі прылады. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
захоўванне: Захоўвайце прыладу ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
Сыход за батарэяй: Каб падоўжыць тэрмін службы батарэі, пазбягайце частай поўнай разрадкі прылады. Рэгулярна зараджайце яе.
Абнаўленні праграмнага забеспячэння: Regularly check for and install software updates for both the i-TPMS device and any paired X-431 scanner or mobile application to ensure optimal performance and compatibility.

7. Выпраўленне непаладак

This section addresses common issues you might encounter with the LAUNCH X-431 i-TPMS.

праблема	Магчымая прычына	Рашэнне
Прылада не ўключаецца.	Нізкі зарад батарэі; няспраўнасць прылады.	Charge the device fully. If issue persists, contact customer service.
Cannot activate sensor.	Sensor out of range; sensor faulty; incorrect frequency.	Ensure device is close to the sensor. Verify sensor type and frequency (315/433MHz). Check sensor battery.
Programming fails.	Sensor not a LAUNCH LTR RF sensor; device not properly connected to scanner/app.	Ensure you are using LAUNCH LTR RF sensors. Verify connection to X-431 scanner or i-TPMS app.
Relearn procedure unsuccessful.	Incorrect relearn procedure for vehicle; vehicle not in relearn mode.	Consult vehicle's service manual for correct relearn procedure. Ensure vehicle is in TPMS relearn mode.

8. Тэхнічныя характарыстыкі

Асаблівасць	Дэталь
Марка	ЗАПУСК
Нумар мадэлі	X-431 i-TPMS (SDC447)
Вага прадмета	2.2 фунта
Supported Sensor Frequencies	315/433MHz (LAUNCH sensors only)
Operating System (for paired scanner)	Windows 10 (as per product data, likely refers to scanner OS)
UPC	810139309857
Вытворца	ITCARDIAG-Official

9. Што ў скрынцы

Image showing the contents of the product package: LAUNCH X-431 i-TPMS device, USB charging cable, and a user manual.

Малюнак 9.1: Змест упакоўкі.

1 x LAUNCH X-431 i-TPMS Device
1 х USB-кабель для зарадкі
1 х Кіраўніцтва карыстальніка (гэты дакумент)

10. Гарантыя і падтрымка

The manufacturer offers a free replacement or return service within 30 days of purchase. For any issues encountered during installation or use, please contact customer service for assistance.

For further inquiries or support, please refer to the contact information provided with your purchase or visit the official LAUNCH webсайт.

Online repair resources, including operating skills, DTC help, tech handbook, repair cases, and a tire pressure maintenance database, are available to assist with diagnosis and repair.