Poafamx AL-300 Water Chiller for Ice Bath User Manual

1. Інфармацыя па бяспецы

Please read all safety instructions carefully before operating the Poafamx AL-300 Water Chiller. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the chiller is placed on a stable, level surface.
• Do not operate the chiller with a damaged power cord or plug.
• Keep the chiller away from direct sunlight and heat sources.
• Do not immerse the chiller unit in water.
• Пераканайцеся, што ўсе злучэнні шлангаў надзейныя, каб прадухіліць уцечкі.
• Always unplug the chiller before performing any maintenance or cleaning.
• Гэты прыбор не прызначаны для выкарыстання асобамі (уключаючы дзяцей) з абмежаванымі фізічнымі, сэнсарнымі або разумовымі здольнасцямі або з адсутнасцю вопыту і ведаў, за выключэннем выпадкаў, калі яны знаходзяцца пад наглядам або праінструктаваныя адносна выкарыстання прыбора асобай, адказнай за іх бяспеку.
• Выкарыстоўвайце толькі з заземленай электрычнай разеткай.

2. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• Poafamx AL-300 Water Chiller Unit
• 2 x Insulated Hoses with Pre-installed Fittings
• 1 x 1/2" Stainless Steel Adapter
• Шнур харчавання
• Кіраўніцтва карыстальніка

3. Прадукт скончыўсяview

The Poafamx AL-300 Water Chiller is designed to provide efficient and consistent cold water for ice bath therapy. It features a powerful compressor, an integrated filtration system, and an intuitive LED touch control screen.

Figure 3.1: Poafamx AL-300 Water Chiller connected to an ice bath tub.

Асноўныя характарыстыкі:

• Powerful 1/3 HP Compressor: Ensures rapid and efficient cooling of water.
• Eco-friendly R290 Refrigerant: Для энергазберагальнай працы.
• Built-in Filter & Water Pump: Circulates water and removes debris, maintaining water quality without additional installations.
• LED Touch Control Screen: Allows for easy temperature setting and monitoring.
• Upgraded Insulated Hoses: Minimize heat loss and accelerate cooling.

Figure 3.2: Integrated filter and pump system.

Figure 3.3: Internal components illustrating the powerful cooling system.

4. Інструкцыі па ўсталёўцы

Follow these steps for proper installation of your water chiller:

1. Positioning the Chiller: Place the chiller on a flat, stable surface near your ice bath tub. Ensure there is adequate ventilation around the unit.
2. Connecting Hoses (for tubs with inlet/outlet ports):
   • Connect one insulated hose to the 'Water IN' port on the chiller and the corresponding inlet port on your ice bath tub.
   • Connect the second insulated hose to the 'Water OUT' port on the chiller and the corresponding outlet port on your ice bath tub.
   • Ensure all connections are secure and the pre-installed fittings are locked to prevent leaks.
3. Connecting Hoses (for bathtubs without inlet/outlet ports):
   • You will need a separate submersible pump (sold separately) for this setup.
   • Place the submersible pump inside the bathtub.
   • Connect one insulated hose from the submersible pump's outlet to the 'Water IN' port on the chiller.
   • Connect the second insulated hose from the 'Water OUT' port on the chiller, directing its end back into the bathtub.
   • Пераканайцеся, што ўсе злучэнні надзейныя.
4. Напаўненне ванны: Fill your ice bath tub with water to the recommended level.
5. Падключэнне сілкавання: Plug the chiller's power cord into a grounded 110V electrical outlet.

Figure 4.1: Chiller connection diagrams for different tub types.

5. Інструкцыя па эксплуатацыі

The Poafamx AL-300 Water Chiller features an intuitive LED touch control screen for easy operation.

1. Уключэнне/выключэнне харчавання: Націсніце кнопку харчавання (O) on the LED screen to turn the unit on or off.
2. Налада тэмпературы:
   • The current water temperature will be displayed on the screen.
   • Выкарыстоўвайце кнопку ўверх (^) і ўніз (v) arrow buttons to adjust your desired target temperature. The chiller will automatically work to reach and maintain this temperature.
   • The chiller can cool water down to 40°F (4.4°C) and maintain temperatures between 36°F (2.2°C) and 122°F (50°C).
3. Працэс астуджэння: Once the target temperature is set, the chiller will begin cooling the water. The cooling effect is influenced by ambient temperature, water volume, and the insulation of your ice bath container. For faster cooling, consider adding ice cubes initially.

Figure 5.1: LED Touch Control Screen for temperature adjustment.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures optimal performance and longevity of your Poafamx AL-300 Water Chiller.

1. Ачыстка фільтра: The built-in filter traps debris and hair. Regularly inspect and clean the filter to maintain water quality and circulation. To clean, unplug the unit, disconnect the hoses, remove the filter housing, rinse the filter under running water, and reassemble.
2. Знешняя ачыстка: Wipe the exterior of the chiller with a soft, damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
3. Якасць вады: Periodically drain and refill your ice bath tub with fresh water to ensure hygiene.

7. Выпраўленне непаладак

If you encounter issues with your chiller, refer to the following common problems and solutions:

Калі праблема не знікне пасля спробы гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.

8. Тэхнічныя характарыстыкі

Technical specifications for the Poafamx AL-300 Water Chiller:

Малюнак 8.1: Памеры і параметры вырабу.

9. Гарантыя і падтрымка

The Poafamx AL-300 Water Chiller comes with a 1-year warranty from the date of purchase. Our customer service team is available to provide support and solutions for any issues encountered with your product.

For warranty claims or technical assistance, please contact Poafamx customer service through the retailer where the product was purchased or visit the official Poafamx webсайт для кантактнай інфармацыі.