Кіраўніцтва карыстальніка бесправадной сістэмы перадачы відэа SYNCO XVision HD (1 перадача 2 прыём)

1. Прадукт скончыўсяview

The SYNCO XVision HD Wireless Video Transmission System provides high-definition video transmission for professional film, television, and live streaming applications. This system, configured with one transmitter (TX) and two receivers (RX), supports 1080P/60fps video with a range of up to 300 meters and ultra-low latency of 40ms. Its compact design and flexible power options make it suitable for various production environments.

Асноўныя характарыстыкі:

• Stable HD Video Transmission: Supports 1080P/60fps video up to 300 meters with SYNCO's ultra-penetration technology.
• Ультранізкая затрымка: 40ms latency for real-time monitoring and feedback, utilizing advanced H.265/HEVC encoding.
• Dual HDMI Connectivity: Features HDMI input, HDMI output, and HDMI loop-out ports for versatile connections.
• Multi-User Monitoring: Supports simultaneous transmission to multiple receivers (up to four) for collaborative workflows.
• Кампактны і партатыўны: Lightweight at 119g with foldable antennas, designed for easy transport and on-the-go use.
• Гнуткія параметры харчавання: Compatible with NP-F batteries and USB-C 5V input.
• SYNCO Link App: Companion app for real-time monitoring, image adjustments (zebra lines, mirroring, false color), video saving, screenshots, and playback.

Што ў скрынцы:

• Transmitter (TX) x 1
• Прыёмнік (RX) x 2
• Кабель Type-C x 3

2. Кампаненты і элементы кіравання

Each unit (Transmitter and Receiver) features a compact design with essential ports and controls for efficient operation.

Перадатчык (TX):

• УХОД HDMI: Connects to the video source (e.g., camera, computer).
• Выхад HDMI: Provides a loop-out signal to a local monitor.
• USB-C 5V IN: Порт ўводу харчавання.
• Пераключальнік уключэння/выключэння: Уключае або выключае прыладу.
• Кнопка PAIR: Initiates pairing with receiver units.
• Слот для батарэі NP-F: For external battery power.
• Экран дысплея: Shows status information like resolution, frame rate, signal strength, and battery level.

Прыёмнік (RX):

• Выхад HDMI: Connects to a display device (e.g., monitor, TV, projector).
• USB-C 5V IN: Порт ўводу харчавання.
• Пераключальнік уключэння/выключэння: Уключае або выключае прыладу.
• Кнопка PAIR: Initiates pairing with the transmitter unit.
• Слот для батарэі NP-F: For external battery power.
• Экран дысплея: Shows status information like resolution, frame rate, signal strength, and battery level.

3. Настройка

3.1 Powering On the Units

1. Ўстаноўка батарэі: If using NP-F batteries, insert a charged battery into the NP-F battery slot on both the TX and RX units.
2. Магутнасць USB-C: Alternatively, connect the provided Type-C cables to the USB-C 5V IN port on both the TX and RX units and plug them into a power source (e.g., USB wall adapter, power bank).
3. Уключэнне: Slide the ON/OFF switch to the 'ON' position for both the transmitter and receiver units. The display screens will illuminate.

3.2 Connecting Video Devices

1. Падключэнне перадатчыка: Connect your video source (e.g., camera, computer, game console) to the HDMI IN port of the TX unit using an HDMI cable.
2. Падключэнне прымача: Connect your display device (e.g., monitor, HDTV, projector) to the HDMI OUT port of each RX unit using an HDMI cable.
3. HDMI Loop-Out (Optional): If you require a local monitor at the transmitter end, connect an HDMI cable from the HDMI OUT port of the TX unit to your local monitor.

3.3 Pairing Transmitter and Receivers

The units are typically pre-paired from the factory. If re-pairing is necessary or if adding additional receivers, follow these steps:

1. Ensure both the TX and RX units are powered on.
2. Press and hold the PAIR button on the TX unit until the display indicates pairing mode.
3. Within a few seconds, press and hold the PAIR button on each RX unit you wish to pair.
4. The units will automatically connect. The display screens will show a successful connection status (e.g., signal strength indicator).

4. Інструкцыя па эксплуатацыі

4.1 Асноўныя аперацыі

• Once powered on and connected, the system will automatically begin transmitting video.
• Monitor the display screens on both TX and RX units for signal strength, battery status, and video resolution/frame rate.
• Ensure antennas are unfolded and positioned for optimal signal reception.

4.2 Using the HDMI Loop-Out

The HDMI OUT port on the transmitter allows for local monitoring without signal delay. Connect an HDMI cable from the TX unit's HDMI OUT to a monitor near your camera setup. This is useful for camera operators who need to see the video feed directly from the source while it is also being transmitted wirelessly.

4.3 SYNCO Link App

The SYNCO Link App enhances the system's capabilities by providing advanced monitoring and control features. Download the app from your device's app store.

1. Падключыцеся да праграмы: Ensure your mobile device is connected to the Wi-Fi network broadcast by the XVision HD system (refer to the unit's display for Wi-Fi name and password, if applicable).
2. Маніторынг у рэжыме рэальнага часу: View the live video feed on your mobile device.
3. Карэкціроўкі выявы: Utilize tools such as zebra lines, mirroring, and false color for precise visual control and exposure analysis.
4. Capture and Review: The app supports built-in video saving, screenshots, and instant playback of captured moments.

5. Тэхнічнае абслугоўванне

5.1 Ачыстка

• Use a soft, dry cloth to clean the exterior of the units.
• Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
• Трымайце парты чысцінёй ад пылу і смецця.

5.2 Сыход за акумулятарам

• Always use recommended NP-F type batteries.
• Remove batteries if the units will not be used for an extended period.
• Захоўвайце батарэі ў прахалодным сухім месцы.

5.3 Захоўванне

• Store the units in a dry, dust-free environment.
• Пазбягайце экстрэмальных тэмператур і вільготнасці.
• When storing, ensure antennas are folded to prevent damage.

6. Выпраўленне непаладак

If you encounter issues with your SYNCO XVision HD system, refer to the following common problems and solutions:

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

For warranty information, please refer to the official SYNCO website or the warranty card included with your product. For technical support, product registration, or further inquiries, please visit the SYNCO support page or contact their customer service directly.

Інтэрнэт-рэсурсы:

• SYNCO Official Webсайт: www.syncoaudio.com
• SYNCO Store on Amazon: Visit the SYNCO Store