DINGLILIGHTING DLLT 18" Caged Bladeless Ceiling Fan with Lights Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your DINGLILIGHTING DLLT 18" Caged Bladeless Ceiling Fan with Lights. Please read all instructions carefully before beginning installation and retain this manual for future reference.

2. Інфармацыя па бяспецы

• Always turn off power at the circuit breaker before beginning installation or maintenance.
• Уся праводка павінна адпавядаць нацыянальным і мясцовым электрычным нормам. Калі вы не знаёмыя з праводкай, звярніцеся да кваліфікаванага электрыка.
• Пераканайцеся, што мантажная канструкцыя можа вытрымаць вагу вентылятара.
• Do not bend the fan blades when installing or cleaning.
• Use only E12 bulbs, maximum 40W each.
• This product is designed for Indoor and Outdoor use, but is not water resistant. Avoid direct exposure to water.

3. Змесціва ўпакоўкі

Пераканайцеся, што ўсе пералічаныя ніжэй кампаненты ўваходзяць у камплект пастаўкі:

• Матор рухавіка вентылятара
• Fan Blades (8x ABS)
• Lamp Arms with E12 Sockets (5x)
• Mesh Cage (Upper and Lower sections)
• Паніжальныя цягі (варыянты 4 і 8 цаляў)
• Мантажны кранштэйн
• Навес
• Remote Control (requires 2*23A batteries, NOT included)
• LED Antique Edison Bulbs (5x ST58 type)
• Прыёмнік кіравання
• Hardware Pack (screws, wire nuts, wrench)
• Кіраўніцтва па ўстаноўцы

4. Настройка і ўстаноўка

Выканайце наступныя дзеянні для правільнай зборкі і ўстаноўкі:

1. Падрыхтуйце мантажны кранштэйн: Disassemble the hanger bracket from the canopy. Attach the mounting bracket to your ceiling junction box using the provided screws and washers. Ensure it is securely fastened.
2. Збярыце Лamp Зброя: Insert the wires from each of the five lamp arms through the designated holes in the fan motor assembly. Secure each lamp arm with a washer and nut.
3. Падключыце Lamp Зброя: Connect all black wires from the lamp arms to the blue wire from the control receiver using a wire nut. Connect all white wires from the lamp arms to the white wire from the control receiver using a wire nut. Secure connections with electrical tape.
4. Прымацаваць лопасці вентылятара: Place the fan blade assembly onto the motor shaft. Secure it by screwing on the cap.
5. Assemble Mesh Cage: Connect the smaller mesh cage sections together using the provided finger-tightening bolts and nuts. Ensure the tabs are facing upwards.
6. Attach Fan Assembly to Mesh Cage: Carefully align the holes on the fan motor assembly with the corresponding holes on the assembled mesh cage. Use the provided long bolts and nuts to secure the fan assembly to the mesh cage.
7. Падрыхтуйце ніжнюю штангу: If using the shorter 4-inch downrod, remove the pre-installed ball from the 8-inch downrod and attach it to the 4-inch downrod. Feed the ground wire through the downrod.
8. Attach Downrod to Fan: Feed the wires from the fan assembly through the chosen downrod. Loosen the set screws on the downrod receiver on the fan motor. Slide the downrod into the receiver, aligning the pin with the hole. Insert the cotter pin and tighten the set screws.
9. Mount Fan to Ceiling: Lift the assembled fan and hook the downrod ball into the ceiling mounting bracket. Connect the ceiling wires (live, neutral, ground) to the corresponding wires from the fan and control receiver using wire nuts.
10. Усталяваць лямпачкі: Screw the provided E12 LED Antique Edison bulbs into the lamp разеткі.
11. Фінальная зборка: Slide the canopy up to cover the wiring and mounting bracket, securing it with the provided screws.

Image: Detailed dimensions and key components of the DLLT Caged Ceiling Fan, including material, light socket type, motor, fan blades, voltage, and functions.

5. Інструкцыя па эксплуатацыі

Your DINGLILIGHTING DLLT Ceiling Fan is operated using the included remote control:

• Святло ВКЛ/ВЫКЛ: Press the 'LIGHT ON/OFF' button to toggle the lights.
• Хуткасць вентылятара: Select from 6 adjustable speeds (1-6) using the numbered buttons.
• Вентылятар УКЛ./ВЫКЛ.: Press the 'FAN/OFF' button to turn the fan on or off.
• Функцыя таймера: Set the fan to automatically turn off after 1, 2, 4, or 8 hours using the '1H', '2H', '4H', '8H' buttons.
• Наперад/назад: Use the 'F/R' button to change the direction of the fan blades. Forward mode (downward airflow) is ideal for cooling in summer. Reverse mode (upward airflow) helps circulate warm air in winter.
• All OFF: Press the 'ALL OFF' button to turn off both the fan and the lights simultaneously.

Выява: Зверхуview of the remote control buttons and their corresponding functions, including light control, fan speed settings, timer options, and fan direction.

Image: Visual representation of the three primary fan speed settings (Low, Medium, High) and their suggested uses for different comfort levels.

Image: Illustration of the 4 fan timing options (1/2/4/8H) for automated sleep shutdown and the silent pure copper motor for quiet operation.

6. Тэхнічнае абслугоўванне

• Уборка: Каб ачысціць вентылятар, працярыце яго мяккай тканінайamp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі або агрэсіўныя хімікаты.
• Замена лямпачкі: Ensure power is off before replacing bulbs. Use only E12 base bulbs, maximum 40W.
• Герметычнасць: Перыядычна правярайце ўсе шрубы і злучэнні, каб пераканацца ў іх надзейнасці.

7. Выпраўленне непаладак

• Вентылятар не працуе: Check power supply, circuit breaker, and ensure all wiring connections are secure. Verify remote control batteries are functional.
• Святло не працуе: Check bulbs, wiring connections, and power supply.
• Excessive wobbling: Ensure all mounting screws are tight and the downrod is properly seated.
• Пульт дыстанцыйнага кіравання не рэагуе: Replace remote batteries. Ensure the receiver is properly installed and not obstructed.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

DINGLILIGHTING provides a 366-day service warranty for this product. If you encounter any problems during use, please feel free to contact our professional after-sales team for assistance.