Dasqua Digital Angel Finder Procractor

Dasqua 220° Digital Angle Finder Protractor Instruction Manual

Model: Digital Angel Finder Procractor

1. Уводзіны

This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.

2. Прадукт скончыўсяview

The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.

2.1 Асноўныя магчымасці

  • Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
  • MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
  • 425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
  • Механізм блакавання: Ensures angles are securely held for transfer.
  • Dual Bubble Levels: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
  • LCD з падсветкай: 0.1° resolution display for clear visibility in various lighting conditions.
  • Трывалая канструкцыя: IP54 waterproof housing, resistant to dust, water, and oil.

2.2 Кампаненты

Diagram showing the components of the Dasqua Digital Angle Finder Protractor, including aluminum material, horizontal bubble, extension plate, vertical bubble, backlit LCD display, and lock knob.
Figure 1: Product Components. This diagram illustrates the main parts of the angle finder, including the aluminum body, horizontal and vertical bubble levels, the extendable leg, the backlit LCD screen, and the locking knob.
  • Асноўны корпус: Houses the digital display and primary measuring arm.
  • Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
  • Ручка блакіроўкі: Secures the sliding leg at a desired angle.
  • ВК-дысплей: Shows digital angle readings and mode indicators.
  • Кнопкі кіравання: (On-Off, Hold, 180°, MTR, COM) for various functions.
  • Узроўні бурбалкі: One horizontal and one vertical for traditional leveling.

3. Настройка

3.1 Устаноўка батарэі

The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:

  1. Locate the battery compartment cover, typically on the side or back of the main body.
  2. Адкрыйце крышку.
  3. Устаўце дзве батарэйкі тыпу АА, сачыце за правільнай палярнасцю (+/-).
  4. Надзейна зачыніце крышку батарэйнага адсека.

The bubble levels operate mechanically and do not require batteries.

3.2 Першапачатковае ўключэнне

Націсніце Уключэнне-выключэнне button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.

4. Інструкцыя па эксплуатацыі

Close-up of the Dasqua Digital Angle Finder's control panel, showing buttons for MTR, COM, Hold, 180 degrees, and On-Off/Zero Setting, along with the backlit LCD display.
Figure 2: Control Buttons. This image highlights the functions of each button on the device: MTR (Simple Miter Mode), COM (Compound Bevel Cutting Mode), Hold (Data Hold), 180° (Supplementary Angle Display), and the On-Off/Zero Setting Key.

4.1 Basic Angle Measurement

  1. Уключыце прыладу.
  2. Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
  3. Adjust the sliding leg until it aligns perfectly with the second surface.
  4. Read the angle directly from the backlit LCD display.
  5. Use the lock knob to secure the angle for transfer if needed.

4.2 MTR (Simple Miter) Mode

Націсніце ССО button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.

4.3 COM (Compound Bevel Cutting) Mode

Націсніце COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.

4.4 Функцыя ўтрымання

Націсніце Трымай button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Трымай зноў, каб вызваліць чытанне.

4.5 180° Supplementary Angle Display

Націсніце 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.

4.6 Устаноўка нуля

To set the current position as the zero reference, fully close the angle finder and press the Уключэнне-выключэнне button briefly. The display will reset to "0.0". This allows for relative angle measurements.

4.7 Using the Bubble Levels

A person using the Dasqua Digital Angle Finder Protractor to check a horizontal surface, showing the horizontal bubble level and the digital display.
Figure 3: Horizontal Leveling. The image demonstrates using the horizontal bubble level to ensure a surface is perfectly flat. Note that the digital display does not show a numerical value for the bubble level.
A person using the Dasqua Digital Angle Finder Protractor to check a vertical surface, showing the vertical bubble level and the digital display.
Figure 4: Vertical Leveling. This image shows the tool being used to verify a vertical alignment using its integrated vertical bubble level. The digital display provides angle readings, but not for the bubble level itself.

The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.

5. Тэхнічнае абслугоўванне

  • Уборка: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp можна выкарыстоўваць тканіну. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
  • захоўванне: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
  • Замена батарэі: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
  • Рэйтынг IP54: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.

6. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Дысплей пусты або цьмяны.Разраджаныя або слабыя батарэі; няправільная ўстаноўка батарэй.Замяніце батарэйкі новымі батарэйкамі тыпу АА, сачыце за правільнай палярнасцю.
Inaccurate angle readings.Device not properly zeroed; obstruction; damaged sensor.Perform zero-setting procedure. Ensure surfaces are clean and flat. If problem persists, contact support.
Sliding leg does not lock securely.Lock knob not tightened sufficiently; debris in mechanism.Ensure lock knob is fully tightened. Clean any debris from the sliding mechanism.

7. Тэхнічныя характарыстыкі

Diagram illustrating the measuring range and dimensions of the Dasqua Digital Angle Finder Protractor, showing a 0-220 degree range, +/- 0.2 degree accuracy, and dimensions of 425mm x 58mm x 41mm.
Figure 5: Measuring Range and Dimensions. This graphic details the operational range of the angle finder (0-220 degrees), its accuracy (±0.2 degrees), and its physical dimensions (425mm length, 58mm width, 41mm height).
  • Дыяпазон вымярэння: 0-220°
  • Дакладнасць: ±0.2°
  • дазвол: 0.1°
  • Sliding Leg Length: 425 мм
  • Bubble Level Accuracy: 1.5 мм/м
  • Крыніца харчавання: 2 x 1.5V LR6 (AA) batteries (for digital display)
  • матэрыял: Алюміній
  • Ступень абароны: IP54 (Dust and splash water resistant)
  • Вага прадмета: 1.28 фунта
  • Памеры ўпакоўкі: 17.87 х 9.17 х 1.77 цалі

8. Гарантыя і падтрымка

Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Каб атрымаць дадатковую дапамогу, вы можаце наведаць Dasqua Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.