Gedsffati HD08
Gedsffati HD08-G Gas and CO Detector User Manual
Мадэль: HD08
Уводзіны
The Gedsffati HD08-G is a direct insertion combined gas and carbon monoxide (CO) detector designed for home use. It provides real-time monitoring of gas and CO concentrations, offering audible and visual alarms to enhance safety. This manual provides essential information for the proper installation, operation, and maintenance of your detector.
Важная інфармацыя па бяспецы
- Перад устаноўкай і выкарыстаннем уважліва прачытайце ўсе інструкцыі.
- Гэта прылада прызначана толькі для выкарыстання ў памяшканні.
- Do not paint the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings of the detector.
- Regularly test the detector as instructed in this manual.
- In case of an alarm, follow the emergency procedures outlined in the operating section.
- This detector is not a substitute for proper maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.
Прадукт скончаныview і Асаблівасці
The HD08-G detector features high-precision sensors for reliable detection of combustible gases (Natural Gas, LPG, Methane, Propane, Butane) and Carbon Monoxide. Its 2.1-inch HD color screen provides clear, real-time information.
Асноўныя характарыстыкі:
- High-precision sensors for gas and CO detection.
- High-definition colorful large screen display (2.1-inch, 240*296 resolution, IPS ultra broad perspective).
- Audible and visual alarm system.
- Fault self-check function.
- Ўстаноўка Plug and Play.
- Real-time monitoring of gas and CO concentration, temperature, and humidity.
Кампаненты:
The device includes a main display unit with three control buttons (H, O, D) and an intelligent power indicator light.

Выява: спераду view of the Gedsffati HD08-G detector highlighting its display and features like high precision sensors and audible/visual alarm.

Выява: Разабраная view illustrating the internal high-precision sensors and sensitive detection performance of the HD08-G detector.
Настройка і ўстаноўка
The HD08-G detector is designed for simple plug-and-play installation.
- Выберыце падыходнае месца:
- For gas detection: Install near gas appliances (e.g., stove, water heater) where gas leaks might occur. Combustible gases like LPG and propane are heavier than air and tend to sink, so place the detector lower. Natural gas and methane are lighter than air and rise, so place it higher.
- For CO detection: Install at breathing height, typically 1.5 meters (5 feet) from the floor. Avoid placing it directly above heat sources or in areas with high humidity.
- Ensure the detector is not obstructed by furniture, curtains, or other objects.
- Plug in the detector: Insert the detector directly into a standard electrical outlet. The device will power on automatically.
- Initial self-check: Upon powering on, the detector will perform a self-check. The intelligent power indicator light will show green if normal.

Малюнак: Examples of suitable installation locations for the HD08-G detector in different environments, emphasizing its versatility for home and travel.
Інструкцыя па эксплуатацыі
Інфармацыя пра дысплей:
The 2.1-inch HD color screen displays the following information:
- CO PPM: Канцэнтрацыя чаднага газу ў мільённых частках.
- ГАЗ: Combustible gas concentration, often represented by a bar graph or numerical value.
- тэмпература: Ambient temperature (e.g., in °F or °C).
- Вільготнасць: Адносная вільготнасць у працэнтахtage.
- Значкі стану: Icons for sound, alarm, and light sensor.

Image: The detector's display showing real-time monitoring of CO and combustible gas concentrations, along with temperature and humidity.

Выява: Падрабязная view of the 2.1-inch HD color screen display, highlighting its clarity and technical specifications.
Функцыя самаправеркі:
To perform a manual self-test:
- Short press the 'O' button on the front of the detector.
- The device will initiate a self-test sequence, activating the alarm and checking sensor functionality.
- The intelligent power indicator light will show green for normal operation. A red light indicates a mute error or sensor malfunction.

Image: Illustration of the intelligent power indicator light and the self-test function, explaining the meaning of green and red light indicators.
Паказанні сігналізацыі:
When gas or CO concentration reaches dangerous levels, the detector will activate an audible and visual alarm.
- Гукавая сігналізацыя: A loud siren will sound.
- Візуальная сігналізацыя: The screen will display alarm messages, and the indicator light will turn red.

Image: The detector in an alarm state, demonstrating the sound and light alarm to prevent danger, with CO and gas levels displayed.
У выпадку трывогі:
- Не панікуйце.
- Адкрыйце вокны і дзверы, каб праветрываць памяшканне.
- Turn off all gas appliances and sources.
- Неадкладна эвакуіруйце памяшканне.
- Патэлефануйце пастаўшчыку газу або экстранным службам з бяспечнага месца.
- Do not re-enter the premises until it has been declared safe by professionals.
Тэхнічнае абслугоўванне
- Рэгулярная ўборка: Gently wipe the detector's exterior with a soft, damp cloth. Do not use cleaning agents, solvents, or abrasive materials.
- Штомесячны тэст: Perform the self-test function (short press 'O' button) at least once a month to ensure proper operation.
- Пазбягайце перашкод: Ensure that the detector's ventilation openings are not blocked by dust, dirt, or other objects.
- Тэрмін службы датчыка: Gas and CO sensors have a limited lifespan. Refer to the product specifications or manufacturer's guidelines for replacement recommendations.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Дэтэктар не ўключаецца. | Няма электрычнасці з разеткі. | Check the power outlet with another appliance. Ensure the detector is fully plugged in. |
| Red indicator light / Alarm during self-test. | Sensor malfunction or mute error. | Unplug and re-plug the detector. If the issue persists, contact customer support. |
| Ілжывыя трывогі. | Interference from strong fumes (e.g., cleaning products, paint, aerosols) or high humidity. | Ensure proper ventilation. Relocate the detector away from sources of fumes or excessive humidity. |
| Дысплей пусты або нечытэльны. | Праблема з харчаваннем або няспраўнасць дысплея. | Check power connection. If still blank, contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Gedsffati customer support.
Тэхнічныя характарыстыкі
| Нумар мадэлі | HD08 |
| Марка | Гедсфаці |
| Нумар дэталі | YDT-EU-HD08-G-WHITE-2PCS |
| Колер | Белы |
| стыль | Падключыце |
| Тып крыніцы харчавання | Правадная электрычная |
| тtage | 230 вольт (пераменны ток) |
| Батарэі ўваходзяць у камплект | няма |
| Патрабуюцца батарэі | No (1 Lithium Polymer batteries required for internal functions, not user replaceable) |
| Вага прадмета | 60 грам |
| Памеры прадукту (Д х Ш х У) | 8.5 х 5.1 х 3.3 см |
| UPC | 747086495947 |
Гарантыя і падтрымка
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support or further assistance, please contact Gedsffati customer service through their official webсайт або кантактную інфармацыю, указаную на ўпакоўцы вашага прадукту.