OSD Audio IWS88 In-Wall Subwoofer and SMP800 Amplifier Bundle Instruction Manual

1. Уводзіны і большview

This manual provides detailed instructions for the installation, operation, and maintenance of your OSD Audio IWS88 In-Wall Subwoofer and SMP800 Class D Mono Amplifier bundle. This system is designed to deliver powerful, deep bass for home theater and audio systems while integrating discreetly into your living space.

У камплект уваходзіць:

• IWS88 In-Wall Subwoofer: A passive subwoofer featuring dual 8-inch drivers, designed for flush installation within a wall. It handles up to 350W of power.
• SMP800 Class D Mono Ampпадпітка: An 800W amplifier specifically designed to power passive subwoofers. It features Class D efficiency, variable crossover, phase control, auto-on sensing, and versatile input options (RCA/LFE, Speaker Level, 12V Trigger).

Для аптымальнай прадукцыйнасці і бяспекі, калі ласка, уважліва прачытайце гэта кіраўніцтва перад устаноўкай і выкарыстаннем.

2. Інструкцыі па тэхніцы бяспекі

Please observe the following safety precautions to prevent damage to the unit and ensure user safety:

• Электрабяспека: Заўсёды адключайце amplifier from the power outlet before performing any service or installation. Ensure proper grounding. Do not expose the ampстойкі да дажджу або вільгаці.
• Вентыляцыя: The amplifier requires adequate ventilation. Do not block any ventilation openings. Install the amplifier in a location with sufficient airflow.
• Размяшчэнне: Install the in-wall subwoofer and amplifier in locations free from excessive heat, humidity, dust, or vibration. Keep the amplifier away from direct sunlight and heat sources.
• Праводка: Ensure all wiring connections are secure and correct before powering on the system. Incorrect wiring can cause damage to the equipment.
• Абслугоўванне: Не спрабуйце самастойна абслугоўваць гэты прадукт. Звярніцеся да ўсіх абслугоўванняў кваліфікаванага абслуговага персаналу.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• OSD Audio IWS88 In-Wall Subwoofer
• OSD Audio SMP800 Class D Mono Ampзадымнік
• Removable Grille for IWS88 Subwoofer
• Power Cable for SMP800 Ampзадымнік
• Інструкцыя па эксплуатацыі (гэты дакумент)
• Mounting Hardware (integrated dog-ear clamps for subwoofer)

4. Настройка і ўстаноўка

4.1 In-Wall Subwoofer Installation (IWS88)

1. Выберыце месцазнаходжанне: Select a suitable wall location, ensuring no obstructions like electrical wiring, plumbing, or studs are present. Use a stud finder to locate studs and avoid them.
2. Выразаць адтуліну: Use the provided cutout template (if included, otherwise measure carefully) to mark the opening on the wall. Carefully cut the opening using a drywall saw.
3. Run Speaker Wire: Route appropriate gauge speaker wire (e.g., 14-gauge or 12-gauge) from the amplifier location to the subwoofer opening. Leave enough slack for connections.
4. Connect Speaker Wire: Connect the speaker wires to the spring-loaded terminals on the IWS88 subwoofer. Ensure correct polarity (+ to + and - to -).

Выява: спераду view of the IWS88 In-Wall Subwoofer with the grille removed, revealing the dual 8-inch drivers and the speaker wire terminals.

Выява: Пад вуглом view of the IWS88 In-Wall Subwoofer, illustrating its internal components, mounting clamps, and speaker terminals.

5. Mount Subwoofer: Carefully insert the subwoofer into the wall opening. Tighten the mounting screws (usually located on the front baffle) which will engage the dog-ear clamps to secure the subwoofer to the drywall. Do not overtighten.
6. Прымацаваць рашотку: Once the subwoofer is securely mounted, attach the magnetic grille to the front of the subwoofer.

Выява: спераду view of the IWS88 In-Wall Subwoofer with the magnetic grille in place, demonstrating its flush and discreet appearance.

4.2 Amplifier Connection (SMP800)

Position the SMP800 amplifier in a well-ventilated area, preferably near your AV receiver or audio source.

Image: Rear panel of the SMP800 Class D Mono Amplifier, highlighting its input and output connections.

1. Падключэнне аўдыёўваходу:
   • Уваход RCA/LFE: For most home theater receivers with a dedicated subwoofer output (LFE or Sub Out), connect an RCA cable from the receiver's subwoofer output to the SMP800's LFE input. If your receiver has stereo RCA outputs, use both L and R inputs on the SMP800.
   • Уваходны ўзровень дынаміка: If your receiver does not have a dedicated subwoofer output, connect speaker wires from your receiver's main speaker outputs to the SMP800's Speaker Level Input terminals.
2. Connect Subwoofer Output: Connect the speaker wires from the IWS88 in-wall subwoofer to the SMP800's Subwoofer Speaker Output terminals. Ensure correct polarity (+ to + and - to -).

Image: Close-up of the SMP800 amplifier's subwoofer speaker output terminals.

Image: Close-up of the SMP800 amplifier's RCA/LFE inputs and speaker level inputs.

3. 12V Trigger (Optional): If your AV receiver or control system has a 12V trigger output, connect it to the SMP800's 12V Trigger input. This allows the ampаўтаматычна ўключаць/выключаць прыладу Liferier разам з асноўнай сістэмай.
4. Падключэнне сілкавання: Connect the supplied power cable to the SMP800 amplifier and then to a suitable AC power outlet. Ensure the AC Voltage Selector switch on the amplifier усталяваны на правільны аб'ёмtage for your region (110-120V or 220-240V).

5. Інструкцыя па эксплуатацыі

5.1 Уключэнне/выключэнне

• Ручное харчаванне: Press the power button on the front panel of the SMP800 amplifier to turn it on or off.
• Auto-On Sensing: Калі amplifier's 'MUSIC ON 12V' switch is set to 'MUSIC' and an audio signal is detected on the RCA/LFE or Speaker Level inputs, the amplifier will automatically power on. It will enter standby mode after a period of no audio signal.
• Трыгер 12В: If connected, the amplifier will power on and off in sync with your main system.

5.2 Adjusting Controls (SMP800)

The SMP800 amplifier features several controls to optimize subwoofer performance:

• Гучнасць/Узмацненне: Рэгулюе агульны ўзровень выходнага сігналу сабвуфера. Пачніце з нізкага ўзроўню і паступова павялічвайце яго, пакуль басы не будуць добра спалучацца з асноўнымі дынамікамі.
• Частата скрыжавання: This control determines the highest frequency the subwoofer will reproduce. Set it to blend seamlessly with your main speakers. A common starting point is 80Hz-100Hz, but adjust based on your main speakers' low-frequency capabilities.
• Кантроль фазы: Adjusts the phase of the subwoofer output (0° or 180°). Experiment with both settings to find the one that provides the most impactful and coherent bass response in your listening position.

6. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your OSD Audio subwoofer and ampвыратавальнік, выконвайце гэтыя простыя рэкамендацыі па тэхнічным абслугоўванні:

• Уборка: Use a soft, dry cloth to clean the surfaces of the amplifier and subwoofer grille. Do not use liquid cleaners, aerosols, or abrasive chemicals, as they may damage the finish or internal components.
• Вентыляцыя: Перыядычна правярайце, ці amplifier's ventilation openings are clear of dust and debris to prevent overheating.
• Сувязі: Occasionally check all cable connections to ensure they are secure. Loose connections can lead to signal loss or intermittent performance.
• Асяроддзе: Пазбягайце выкрыцця ampвытрымліваюць экстрэмальныя тэмпературы або вільготнасць.

7. Выпраўленне непаладак

If you encounter issues with your OSD Audio subwoofer and amplifier bundle, refer to the following troubleshooting guide:

If the problem persists after trying these solutions, please contact OSD Audio customer support.

8. Тэхнічныя характарыстыкі

IWS88 In-Wall Subwoofer

• Тып: Passive In-Wall Subwoofer
• Драйверы: Dual 8-inch Woofers
• Харчаванне: 350 ват
• Імпеданс: 8 Ом
• АЧХ: Refer to product page for detailed specifications.
• Памеры: Refer to product page for detailed dimensions and cutout size.

SMP800 Class D Mono Ampзадымнік

• Ampтып падцяжкі: Клас D Mono
• Выходная магутнасць: 800 Вт (макс.)
• Уваходы: RCA/LFE, Speaker Level, 12V Trigger
• Выхады: Выхад для сабвуфера
• элементы кіравання: Variable Crossover, Phase Control (0°/180°), Volume/Gain
• Асаблівасці: Аўтаматычнае ўключэнне
• Пераменнага токуtage: Selectable (110-120V / 220-240V)
• Памеры: Refer to product page for detailed dimensions.

9. Гарантыя і падтрымка

9.1 Інфармацыя аб гарантыі

OSD Audio products are designed and manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage caused by improper installation, accident, misuse, abuse, negligence, unauthorized modification, or normal wear and tear.

9.2 Падтрымка кліентаў

For technical assistance, troubleshooting, or warranty inquiries, please visit the official OSD Audio website or contact their customer support department. Contact information can typically be found on the OSD Audio webсайце або на ўпакоўцы прадукту.

Before contacting support, please have your product model numbers (IWS88 and SMP800) and a description of the issue ready.