Кіраўніцтва карыстальніка бесправаднога дзвярнога званка Vlectro Extra Look - мадэль 5404017912731

1. Уводзіны

Thank you for choosing the Vlectro Extra Loud Wireless Doorbell. This system is designed to provide a reliable and easily audible notification for visitors, particularly beneficial for the elderly or individuals with hearing difficulties. This manual will guide you through the installation, operation, and maintenance of your new doorbell system.

2. Інфармацыя па бяспецы

• Keep the doorbell button and receiver away from direct sunlight, rain, and extreme temperatures.
• Do not attempt to open or repair the devices yourself. Refer all servicing to qualified personnel.
• Бяспека акумулятара: Ensure correct polarity when inserting batteries into the receiver. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly according to local regulations.
• Keep small parts, such as batteries, out of reach of children to prevent choking hazards.

3. Змесціва ўпакоўкі

Калі ласка, праверце наяўнасць усіх прадметаў у вашай упакоўцы:

• 1 x Vlectro Wireless Doorbell Button (Transmitter)
• 1 x Vlectro Wireless Doorbell Receiver
• Mounting Hardware (Screws and Wall Plugs)
• Клеевая пракладка
• Кіраўніцтва карыстальніка (гэты дакумент)

Малюнак 1: Image showing the Vlectro Wireless Doorbell button and receiver. The button is a compact, black, water-resistant unit, and the receiver is a slightly larger black unit, typically placed indoors.

4. Настройка і ўстаноўка

4.1 Усталёўка прыёмніка

1. Адкрыйце батарэйны адсек на задняй панэлі прымача.
2. Insert the required AAA batteries (not included), ensuring correct polarity (+/-).
3. Зачыніце батарэйны адсек.
4. Place the receiver in a central location within your home where the chime can be easily heard. The receiver is portable and does not require a power socket.

4.2 Installing the Doorbell Button (Transmitter)

The doorbell button can be installed using either the provided adhesive pad or screws.

Option A: Adhesive Mounting

1. Старанна ачысціце патрэбную паверхню для мантажу, каб пераканацца, што яна сухая і без пылу або тлушчу.
2. Peel off one side of the protective film from the adhesive pad and attach it to the back of the doorbell button.
3. Peel off the other side of the protective film and firmly press the doorbell button onto the cleaned surface for at least 30 seconds.

Option B: Screw Mounting

1. Mark the desired drilling points on the wall using the doorbell button as a template.
2. Прасвідруйце дзве адтуліны ў пазначаных месцах.
3. Устаўце дзюбелі ў прасвідраваныя адтуліны.
4. Align the doorbell button with the holes and secure it with the provided screws.

Заўвага: Ensure the doorbell button is installed in a location protected from heavy rain to prolong its lifespan, despite its water-resistant design.

5. Інструкцыя па эксплуатацыі

5.1 Changing the Chime Melody

Your Vlectro doorbell offers 58 different chime melodies. To change the melody:

1. On the receiver, locate the "Music Selection" button (often indicated by a musical note icon).
2. Press this button repeatedly to cycle through the available melodies.
3. Once you hear your preferred melody, stop pressing the button. The receiver will automatically save this selection.

5.2 Рэгуляванне гучнасці

The receiver has 4 adjustable volume levels, including a mute option, with a maximum output of 100dB.

1. On the receiver, locate the "Volume" button (often indicated by a speaker icon).
2. Press this button repeatedly to cycle through the volume levels (Level 1, Level 2, Level 3, Level 4, Mute).
3. Выберыце патрэбны ўзровень гучнасці.

5.3 Pairing (If Needed)

Your doorbell system should be pre-paired from the factory. If the doorbell button does not trigger the receiver, you may need to re-pair them:

1. On the receiver, press and hold the "Volume" button for approximately 5 seconds until you hear a "ding" sound or see an indicator light flash. This puts the receiver into pairing mode.
2. Within 10 seconds, press the doorbell button once.
3. The receiver should chime, indicating successful pairing. If not, repeat the process.

6. Тэхнічнае абслугоўванне

• Уборка: Wipe the doorbell button and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Замена батарэі (прыёмнік): When the receiver's sound becomes weak or stops working, it's time to replace the AAA batteries. Follow the instructions in Section 4.1.
• Battery Replacement (Doorbell Button): The doorbell button typically uses a long-lasting coin cell battery (e.g., CR2032). If the button stops working, carefully open the button casing (refer to manufacturer's instructions if available, or gently pry open) and replace the battery, ensuring correct polarity.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

• мадэль: 5404017912731
• Марка: Электра
• Памеры прадукту: 7.7 х 11.5 х 8.7 см
• Колер: Чорны
• Уключаныя кампаненты: Wireless Doorbell Button, Receiver
• Бесправадны дыяпазон: Да 150 метраў (на адкрытым паветры)
• Узровень гуку: Да 100 дБ
• Мелодыі званкоў: 58 варыянты
• Узроўні гучнасці: 4 levels, including mute
• Магутнасць прымача: Батарэі AAA (не ўваходзяць у камплект)
• вытворца: Confinity (NV)

9. Гарантыя і падтрымка

For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Vlectro webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.