Tivoli Audio Model Three Bluetooth Clock Radio User Manual

1. Настройка

This section guides you through the initial setup of your Tivoli Audio Model Three Bluetooth Clock Radio.

1.1 Распакоўка і размяшчэнне

Carefully remove the unit from its packaging. Place the radio on a stable, flat surface such as a tabletop. Ensure adequate ventilation around the unit.

Фронт view of the Tivoli Audio Model Three Bluetooth Clock Radio in Walnut/Beige.

1.2 Падключэнне харчавання

Connect the provided power cord to the AC IN port on the back of the radio, then plug it into a wall outlet. The unit operates on corded electric power.

1.3 Battery Installation (for Clock)

The analog clock requires 1 AA battery (included) for operation. Locate the battery compartment on the back of the unit, insert the AA battery, ensuring correct polarity, and close the compartment. This battery powers the clock function independently of the main power supply.

Тыл view of the radio, highlighting the battery compartment and various input/output ports.

1.4 Падключэнне антэны

For optimal FM reception, extend the built-in telescopic FM antenna. For external FM or AM antenna connections, refer to the ports on the back of the unit.

1.5 Пачатковая ўстаноўка часу

To set the analog clock, use the 'TIME SET' control, typically a small knob or button on the back or side of the clock face. Rotate or press to adjust the hour and minute hands to the current time. Be aware that this is an analog clock and may require manual adjustment for time changes.

2. Інструкцыя па эксплуатацыі

Learn how to use the various features of your Model Three Clock Radio.

2.1 Уключэнне/выключэнне харчавання і выбар рэжыму

Use the main function knob/switch to turn the unit ON or OFF. This control also allows you to select between FM, AM, Bluetooth (BT), and Auxiliary (AUX) input modes.

Close-up of the front panel showing the mode selector, tuning dial, and volume knob.

2.2 Праца з радыё (AM/FM)

1. Switch the mode selector to FM or AM.
2. Павярніце вялікі Цыферблат налады to select your desired radio station. The tuning indicator light will illuminate when a strong signal is received.
3. Адрэгулюйце Ручка гучнасці to your preferred listening level.

2.3 Спалучэнне па Bluetooth

1. Switch the mode selector to BT (Bluetooth). The Bluetooth indicator light will begin to flash, indicating it is in pairing mode.
2. На мабільнай прыладзе (смартфоне, планшэце і г.д.) уключыце Bluetooth і знайдзіце даступныя прылады.
3. Select "Tivoli Audio Model Three" from the list of devices.
4. Once paired, the Bluetooth indicator light on the radio will stop flashing and remain solid. You can now stream audio wirelessly to your radio.

2.4 Дапаможны ўваход

To play audio from an external device (e.g., MP3 player, older smartphone), connect a 3.5mm audio cable from your device's headphone jack to the AUX IN port on the back of the radio. Switch the mode selector to ДАП. Control playback and volume from your external device.

2.5 Alarm Clock, Sleep Timer, and Snooze

• Ўстаноўка будзільніка: Use the dedicated alarm set buttons (e.g., ALARM SET, ALARM ON/OFF) to configure your desired wake-up time. Refer to the specific button labels on your unit for precise instructions.
• Таймер сну: Activate the sleep timer function to automatically turn off the radio after a set period.
• Кнопка паўтору: When the alarm sounds, press the Snooze button to temporarily pause the alarm for a few minutes.

2.6 USB-A & USB-C Charging Ports

The radio features built-in USB-A and USB-C charging ports on its side. These ports provide 5V 1A power output for charging compatible phones and tablets. Simply connect your device's charging cable to the appropriate USB port.

Збоку view of the radio, highlighting the USB-A and USB-C charging ports.

3. Тэхнічнае абслугоўванне

Proper care ensures the longevity and optimal performance of your radio.

3.1 Ачыстка

Wipe the cabinet and controls with a soft, dry cloth. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish. Do not spray liquids directly onto the radio.

3.2 Clock Battery Replacement

The analog clock's AA battery should be checked annually and replaced as needed to ensure accurate timekeeping. A weak battery may cause the clock to stop or lose time. Refer to section 1.3 for battery installation details.

4. Выпраўленне непаладак

If you encounter issues with your radio, consult the following common solutions.

• Няма сілы: Ensure the power cord is securely plugged into both the radio and a working wall outlet.
• Дрэнны радыёпрыём: Extend the FM telescopic antenna fully. Try repositioning the radio or the antenna. If using an external antenna, ensure it is correctly connected.
• Праблемы спалучэння Bluetooth: Make sure the radio is in BT mode and its indicator light is flashing. Ensure your device's Bluetooth is enabled and within range. Try forgetting the device on your phone and re-pairing.
• Clock Not Keeping Time / Difficult to Set: Verify the AA battery for the clock is fresh and correctly installed. The analog clock requires manual adjustment; ensure you are using the correct 'TIME SET' control.
• Парты USB для зарадкі не працуюць: Check that the radio is powered on. Ensure your device's charging cable is fully inserted into the USB-A or USB-C port. Test with a different cable or device to rule out cable/device issues.
• No Audio from Auxiliary Input: Confirm the mode selector is set to AUX. Check the connection of the 3.5mm audio cable at both ends. Ensure the volume on your external device is turned up.

5. Тэхнічныя характарыстыкі

6. Гарантыя і падтрымка

Your Tivoli Audio Model Three Bluetooth Clock Radio is covered by a manufacturer's warranty. For specific warranty details, registration, and technical support, please visit the official Tivoli Audio webсайт або звярніцеся ў службу падтрымкі кліентаў.

For additional information and support, please visit the Tivoli Audio Store on Amazon.