OREI UHD14-EX230-K HDMI 1x4 Splitter & Extender Instruction Manual

1. Уводзіны

The OREI UHD14-EX230-K is an advanced HDMI 1x4 Splitter and Extender system designed for distributing a single HDMI source to four remote displays over a single CAT6/7/8 network cable. This system supports 4K@60Hz resolution, HDCP 2.2, EDID management, and features an HDMI loop-out for local monitoring. It also includes bi-directional IR control and utilizes Power-over-Cable (PoC) technology, eliminating the need for external power adapters at the receiver units.

2. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

• 1x OREI UHD14-EX230-K HDMI Transmitter (Sender)
• 4x OREI UHD14-EX230-K HDMI Receivers
• Адаптар сілкавання 1x 12 В пастаяннага току
• 1x IR Blaster Cable (for Transmitter)
• 4x IR Receiver Cables (for Receivers)
• 10x Mounting Ears (for Transmitter and Receivers)
• 1x Кіраўніцтва карыстальніка

Image: All components included in the OREI UHD14-EX230-K kit, neatly arranged on a table.

3. Інструкцыі па ўсталёўцы

Follow these steps to set up your OREI HDMI Splitter & Extender system:

1. Connect HDMI Source to Transmitter: Connect your HDMI source device (e.g., DVD player, game console, media player) to the HDMI IN port on the Transmitter unit using a high-quality HDMI cable.
2. Connect Local Display (Optional): If you wish to monitor the content locally, connect an HDMI display to the HDMI LOOP OUT port on the Transmitter unit using another high-quality HDMI cable.
3. Connect CAT Cables: Connect one end of a single CAT6/7/8 network cable to each of the OUT 1-4 RJ45 ports on the Transmitter. Connect the other end of each CAT cable to the CAT IN port on each of the four Receiver units. Ensure secure connections for optimal performance.
4. Connect Remote Displays: Connect an HDMI display to the HDMI OUT port on each Receiver unit using high-quality HDMI cables.
5. Connect IR Cables: For IR control, connect the IR Blaster cable to the IR OUT port on the Transmitter. Position the IR Blaster eye near the IR sensor of your HDMI source device. Connect the IR Receiver cables to the IR IN ports on each Receiver unit. Position the IR Receiver eye in a location where it can receive signals from your remote control.
6. Ужыць магутнасць: Plug the included 12V DC power adapter into the DC12V port on the Transmitter unit, then plug the adapter into a standard wall outlet. The Receiver units will receive power via the CAT cables (PoC), so no separate power adapters are needed for them.
7. Уключэнне: Turn on the Transmitter unit using its power switch. The power indicator LED will light up. The Receiver units will power on automatically.

Image: A detailed diagram illustrating the connection of the HDMI source to the Transmitter, CAT cables to Receivers, and HDMI displays to Receivers, including optional loop-out and IR connections.

4. Інструкцыя па эксплуатацыі

The OREI UHD14-EX230-K is designed for plug-and-play operation. Once all connections are made and power is supplied to the Transmitter, the system will automatically detect and configure the optimal video resolution for your connected displays.

• Automatic EDID Management: The system features automatic EDID management to ensure compatibility between your HDMI source and various displays. It will negotiate the best possible resolution and audio format.
• ВК-кантроль: Use your original remote control at any of the remote display locations. The IR Receiver will capture the signal and transmit it back to the Transmitter, which then uses the IR Blaster to control your source device. This allows full control of your source from any connected display.
• Нізкая затрымка: The system is engineered for ultra-low latency, making it suitable for applications requiring minimal delay, such as gaming or live presentations.

5. Асаблівасці

The OREI UHD14-EX230-K offers a robust set of features for high-quality HDMI distribution:

• 4K@60Hz HDMI Over Ethernet: Seamlessly transmits one HDMI source to four HDMI displays.
• Пашыраны дыяпазон: Extends 4K@60Hz up to 200 ft or 4K@30Hz up to 230 ft over a single CAT6/7/8 network cable.
• Built-in Splitter: Distributes the HDMI signal to four outputs simultaneously.
• HDMI Loop-Out: Provides an additional HDMI output on the Transmitter for local monitoring.
• HDCP 2.2 Compliant: Забяспечвае сумяшчальнасць з абароненым кантэнтам.
• Advanced EDID Management: Optimizes display compatibility and performance.
• Bi-directional IR Control: Allows control of the source device from remote locations and vice-versa.
• 18 Gbps HDR Pass-Through: Supports HDR, HDR10, HDR10+, Dolby Vision, and HLG for stunning visuals.
• Power-over-Cable (PoC): Powers Receiver units directly from the Transmitter via CAT cable, simplifying installation.
• Падключыў і гуляй: Requires no software or drivers for installation.
• Трывалы металічны корпус: Provides robust protection for the units.

Image: A visual summary of the OREI UHD14-EX230-K's key features, including HDCP 2.2 compliance, 4K@60Hz video resolution, 18Gbps bandwidth, 230ft extension, loop output, PoC, and plug-and-play functionality.

6. Тэхнічныя характарыстыкі

Image: A graphic detailing the compact and lightweight design of the OREI UHD14-EX230-K units, including dimensions, weight, material (metal enclosure), and color (black).

7. Выпраўленне непаладак

• Няма выявы/сігналу:
  • Ensure all HDMI and CAT cables are securely connected.
  • Verify the Transmitter unit is powered on and its power indicator is lit.
  • Check if the CAT cables are of high quality (CAT6/7/8) and within the specified length limits.
  • Try connecting the HDMI source directly to a display to confirm the source is working correctly.
  • Power cycle all devices (source, extender, displays).
• Дрэнная якасць выявы:
  • Ensure you are using high-quality HDMI and CAT cables.
  • Check cable lengths against specifications; excessive length can degrade signal quality.
  • Verify that your displays support the output resolution of your source.
• IR Control Not Working:
  • Ensure IR Blaster and IR Receiver cables are correctly plugged into their respective ports (IR OUT on Transmitter, IR IN on Receivers).
  • Position the IR Blaster eye directly over or very close to the IR sensor of your source device.
  • Ensure the IR Receiver eye at the remote location is unobstructed and facing your remote control.
• Перарывісты сігнал:
  • Праверце наяўнасць аслабленых злучэнняў кабеляў.
  • Ensure CAT cables are not bent sharply or damaged.
  • Minimize electromagnetic interference by keeping CAT cables away from power lines or other electronic devices.

8. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your OREI UHD14-EX230-K system, follow these maintenance guidelines:

• Уборка: Use a soft, dry cloth to clean the units. Avoid using liquid or aerosol cleaners.
• Вентыляцыя: Забяспечце дастатковую цыркуляцыю паветра вакол прылад, каб прадухіліць перагрэў. Не блакуйце вентыляцыйныя адтуліны.
• Асяроддзе: Operate the units in a dry environment, away from direct sunlight, high temperatures, and humidity.
• Кабельнае кіраванне: Organize cables neatly to prevent damage and ensure stable connections.

9. Гарантыя і падтрымка

The OREI UHD14-EX230-K comes with a 1-year OREI manufacturer's warranty, ensuring reliable AV distribution. Additionally, OREI provides lifetime technical support for this product.

• Гарантыя: Covers defects in materials and workmanship under normal use for one year from the date of purchase.
• Тэхнічная падтрымка: For any technical assistance or troubleshooting, please contact OREI customer support. Refer to the included user manual for contact details or visit the official OREI webсайт.