Traxon Allegro XB36 Outdoor LED Wall Washer Flood Instruction Manual

1. Уводзіны

This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.

The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.

Малюнак 1: Пярэдняя частка view of the Traxon Allegro XB36 LED Wall Washer Flood Light.

2. Інфармацыя па бяспецы

• Электрычная небяспека: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
• тtage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
• Зазямленне: Ensure the fixture is properly grounded to prevent electrical shock.
• Выкарыстанне на адкрытым паветры: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
• тэмпература: Do not operate the fixture outside its specified ambient temperature range.
• Апрацоўка: Handle the fixture with care. Avoid dropping or subjecting it to severe impact.
• Крыніца святла: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.

3. Змесціва ўпакоўкі

Пры распакаванні пераканайцеся, што ўсе кампаненты наяўныя і не пашкоджаныя:

• Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
• Mounting Bracket (pre-attached or separate)
• Інструкцыя па эксплуатацыі (гэты дакумент)

Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.

4. Настройка і ўстаноўка

4.1 Мантаж свяцільні

1. Выберыце месцазнаходжанне: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
2. Кранштэйны пазіцыі: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
3. Бяспечнае прыстасаванне: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.

4.2 Электрычнае падключэнне

The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.

Малюнак 2: Задняя частка view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.

1. Адключэнне сілкавання: Turn off the main power supply at the circuit breaker before making any electrical connections.
2. Падключэнне ўваходнага сілкавання: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
3. Паслядоўнае падключэнне (неабавязкова): If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
4. Бяспечныя злучэнні: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.

Малюнак 3: Задняя частка view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.

Important: All wiring must comply with local electrical codes and regulations.

5. Інструкцыя па эксплуатацыі

1. Уключэнне: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
2. Зацямненне: The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
3. Кут прамяня: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
4. Карэкціроўка: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.

6. Тэхнічнае абслугоўванне

The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.

• Уборка: Перыядычна чысціце аб'ектыў і корпус мяккай губкайamp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners or solvents.
• агляд: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
• Рамонт: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

• мадэль: XB.W3.8370110
• Марка: Traxon
• Уваходны кнtage: 120 В пераменнага току
• Ватtage: 44 ват
• Выхад у люменах: 2631 люмен
• Каляровая тэмпература (CCT): 3000 тыс
• Размеркаванне святла: 7°
• Зацямненне: Phase Cut Dimmable
• Рэйтынг IP: IP66 (Outdoor Rated)
• Будаўніцтва: Aluminum/Glass
• Фініш: Чорны
• Вага прадмета: 13.14 фунта (5.96 кг)
• Памеры прадукту: 9 х 5.3 х 11.3 цалі (22.86 х 13.46 х 28.7 см)
• вытворца: Осрам

9. Інфармацыя аб гарантыі

Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.

10. Падтрымка

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.