Важная інфармацыя па бяспецы
Before operating your OKAI EA10A Electric Scooter, please read this manual thoroughly to ensure safe and proper use. Failure to follow instructions can result in serious injury or property damage. Always wear a helmet and appropriate safety gear. Observe all local traffic laws and regulations.
- Заўсёды апранайце шлем і іншыя ахоўныя сродкі (накаленнікі, налакотнікі) падчас язды.
- Do not ride in wet conditions, heavy rain, or through puddles deeper than 1 inch. The scooter has an IPX5 waterproof rating, but excessive water exposure can cause damage.
- Перад кожнай паездкай пераканайцеся, што ўсе кампаненты надзейна замацаваны.
- Не перавышайце максімальную вагу ў 220 фунтаў (100 кг).
- Avoid riding on steep inclines or uneven terrain.
- Падчас язды трымайце абедзве рукі на рулі.
- Азнаёмцеся з тармазной сістэмай, перш чым ездзіць на высокіх хуткасцях.
- Children under the age of 16 should not operate this scooter.
1. Налада і зборка
1.1 Распакоўка і першапачатковы агляд
Carefully remove all components from the packaging. Verify that all included items are present: scooter body, seat, charger, key, and tool kit. Inspect the scooter for any visible damage from shipping.
1.2 Руль у зборы
Unfold the handlebar stem and secure it in the upright position using the quick-release lever. Ensure it clicks into place firmly. Tighten any loose screws with the provided tool kit.

Image: The handlebar assembly with the integrated LED display. This display shows speed, battery level, and other operational indicators.
1.3 Seat Installation
Insert the seat post into the designated opening on the scooter body. Adjust the seat height to a comfortable position and secure it using the quick-release clamp. Ensure the seat is stable and does not wobble.

Image: Close-up of the scooter's seat, showing its design and spring suspension for comfort.
1.4 Усталёўка акумулятара і першапачатковая зарадка
The OKAI EA10A features a detachable battery. To install, unlock the battery compartment, insert the battery pack, and secure it. For initial use, fully charge the battery. Connect the charger to the scooter's charging port or remove the battery and charge it separately. The charging indicator light on the charger will turn green when fully charged.

Image: Illustration showing two charging methods: directly charging the scooter and charging the detachable battery separately.
2. Інструкцыя па эксплуатацыі
2.1 Уключэнне/выключэнне
Press and hold the power button on the handlebar for a few seconds to turn the scooter on or off. The LED display will illuminate upon power-on.
2.2 Язда на скутэры
Place one foot on the footboard and push off with the other foot to gain initial momentum. Once moving, gently press the throttle lever to engage the motor. Maintain balance and keep your gaze forward. The scooter is designed for a comfortable seated riding position.

Image: An adult riding the OKAI EA10A electric scooter, demonstrating the seated riding position.
2.3 Тармазная сістэма
The OKAI EA10A is equipped with dual braking systems: a mechanical drum brake at the front and a mechanical drum brake combined with an electronic brake at the rear. To slow down or stop, gently squeeze the brake levers on the handlebars. Apply both brakes simultaneously for optimal stopping power and control.

Image: Diagram illustrating the internal mechanism of the drum brake system on the OKAI EA10A electric scooter.
2.4 LED Display Functions
The integrated LED display provides real-time information including current speed, battery level, riding mode, and headlight status. Refer to the detailed diagram in the physical manual for specific button functions and display indicators.
2.5 Падключэнне прыкладання
The OKAI EA10A can connect to a smartphone application for additional features and settings. Download the official OKAI app from your device's app store. Follow the in-app instructions to pair your scooter via Bluetooth. The app allows for customization of riding modes, viewing ride statistics, and firmware updates.

Image: A user interacting with the OKAI smartphone application, showing scooter controls and information on the phone screen.
2.6 Footboard and Legroom
The scooter features an extended footboard design, providing 10.6 inches of legroom for enhanced rider comfort during operation. Ensure your feet are placed securely on the footboard while riding.

Image: Close-up of the scooter's footboard, highlighting the 10.6-inch legroom for rider comfort.
3. Тэхнічнае абслугоўванне
3.1 Сыход за акумулятарам
- Рэгулярна зараджайце акумулятар, нават калі самакат не выкарыстоўваецца, каб падтрымліваць яго ў працоўным стане.
- Пазбягайце поўнай разрадкі акумулятара перад зарадкай.
- Захоўвайце батарэю ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
- If storing for an extended period, charge the battery to approximately 50-70% capacity.
3.2 Тэхнічнае абслугоўванне шын
The scooter is equipped with 10-inch vacuum tires. Regularly check tire pressure and inflate to the recommended PSI (refer to the tire sidewall for specifications). Inspect tires for wear, punctures, or damage before each ride.

Image: The scooter's vacuum tire demonstrating its performance in wet conditions, highlighting its IPX5 waterproof rating.
3.3 Ачыстка і захоўванне
Ачысціць скутэр з рэкламайamp cloth. Do not use high-pressure water jets or corrosive cleaning agents. For storage, ensure the scooter is clean and dry. Store in a cool, dry indoor location. The scooter is foldable for easier storage.
4. Выпраўленне непаладак
- Скутар не ўключаецца:
- Праверце, ці правільна ўсталяваны і цалкам зараджаны акумулятар.
- Пераканайцеся, што кнопка харчавання націснутая і ўтрымліваецца на працягу неабходнага часу.
- Пераканайцеся, што акумулятар надзейна падключаны.
- Рухавік не ўключаецца:
- Ensure the scooter has initial momentum before applying the throttle.
- Check the battery level on the LED display.
- Confirm that no error codes are displayed.
- Тормазы адчуваюцца слабымі або неэфектыўнымі:
- Inspect brake cables for damage or looseness.
- Refer to the physical manual for instructions on adjusting brake tension.
- Калі праблемы не знікнуць, звярніцеся ў службу падтрымкі.
- Праблемы з падключэннем да праграмы:
- Пераканайцеся, што Bluetooth уключаны на вашым смартфоне.
- Перазагрузіце і самакат, і смартфон.
- Try re-pairing the scooter through the app settings.
5. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Марка | ОКАЙ |
| Назва мадэлі | EA10A |
| Узроставы дыяпазон (апісанне) | Дарослы |
| Асаблівасць | Складаны |
| Абмежаванне вагі | 220 фунта |
| Колькасць колаў | 2 |
| Матэрыял колаў | Гумавая |
| Памер колы | 10 цалі |
| Тып колы | Вакуумныя шыны |
| Тормазны стыль | Front: mechanical drum brake, Rear: mechanical drum brake + electronic brake |
| Вытворца | Zhejiang Okai Vehicle Co., Ltd. |
| Уключаныя кампаненты | Manual, Charger, Key, Tool kit |
6. Інфармацыя аб гарантыі
The OKAI EA10A Electric Scooter comes with a Limited Warranty. For detailed terms and conditions, including coverage period and claim procedures, please refer to the warranty card included in your product packaging or visit the official OKAI webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
7. Падтрымка кліентаў
If you encounter any issues not covered in this manual, or require further assistance, please contact OKAI customer support. You can typically find contact information on the official OKAI website or through the retailer where you purchased the scooter. Please have your model number (EA10A) and purchase date ready when contacting support.
Для атрымання дадатковай інфармацыі наведайце OKAI Store on Amazon.