Уводзіны
Thank you for choosing the DIYtoolifz 1/2 Inch 1700 Ft-Lbs Cordless Impact Wrench. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
Агульная інфармацыя па бяспецы
Always wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection when operating power tools. Ensure your work area is well-lit and clear of obstructions. Keep children and bystanders away while operating the tool. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Што ў скрынцы
Your DIYtoolifz Cordless Impact Wrench kit includes the following components:
- 1 x DIYtoolifz 1/2 Inch 1700 Ft-Lbs Cordless Impact Wrench (Battery Not Included)
- 6 ударных гаек (17 мм, 18 мм, 19 мм, 21 мм, 22 мм, 24 мм)
- 1 х трывалы футляр для захоўвання
- 1 х Кіраўніцтва карыстальніка (гэты дакумент)
Настройка
Ўстаноўка акумулятара
This cordless impact wrench is compatible with Milwaukee 18V batteries, including models such as 48-11-1820, 48-11-1828, 48-11-1841, 48-11-1850, 48-11-1862, and 48-11-1880. For optimal performance, a battery of 4Ah or higher is recommended. To install the battery, align the battery pack with the base of the tool and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery pack out.
Socket Attachment
Select the appropriate impact socket for your task. Align the square drive of the socket with the anvil of the impact wrench and push it firmly until it locks into place. To remove the socket, pull it off the anvil while ensuring the tool is powered off.
Інструкцыя па эксплуатацыі
Уключэнне/выключэнне харчавання і кантроль хуткасці
The tool features a variable speed trigger. Press the trigger to start the tool; the speed increases as you press the trigger further. The impact wrench offers 4-speed settings, allowing for precise control from 0-1850 RPM. Use the speed selection button, typically located near the battery indicator, to cycle through the different speed modes to match the application requirements.
Рэжым наперад/назад
A directional switch, usually located above the trigger, allows you to select forward (tightening) or reverse (loosening) rotation. Ensure the switch is in the desired position before operating the tool. The tool also features an auto-stop function in reverse mode to prevent over-loosening or accidental ejection of fasteners.
Святлодыёдны працоўны свяцільня
The integrated LED work light illuminates your work area, providing better visibility in dimly lit or confined spaces. The light activates automatically when the trigger is pressed.
Тэхнічнае абслугоўванне
Рэгулярнае тэхнічнае абслугоўванне забяспечвае даўгавечнасць і аптымальную прадукцыйнасць вашага інструмента.
- Уборка: Keep the tool's ventilation openings clear and free of dust and debris. Use a soft, damp тканінай для чысткі корпуса. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі.
- захоўванне: Store the impact wrench and its accessories in the provided durable storage case in a dry, secure location away from direct sunlight and extreme temperatures.
- Сыход за батарэяй: Always store batteries in a cool, dry place. Do not store batteries in a discharged state for extended periods.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Інструмент не запускаецца | Акумулятар усталяваны няправільна або разраджаны. | Пераканайцеся, што акумулятар цалкам зараджаны і правільна ўсталяваны. |
| Нізкая магутнасць/крутоўны момант | Battery charge is low or incorrect speed setting. | Recharge battery. Select a higher speed setting. |
| Socket falls off | Socket not fully engaged or worn anvil. | Push socket firmly onto anvil until it locks. Inspect anvil for wear. |
Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Марка | DIYtoolifz |
| Нумар мадэлі | Акумулятарны ўдарны гайковерт |
| Памер дыска | 1/2 цалі |
| Максімальны момант аслаблення | 1700 Ft-Lbs |
| Максімальны момант зацяжкі | 1350 Ft-Lbs |
| Хуткасць без нагрузкі | 0-1850 RPM (4-Speed) |
| Тып рухавіка | Бесщеточный |
| тtage | 18 Volts (Compatible with Milwaukee 18v batteries) |
| Матэрыял | Хромаванадиевая сталь |
| Вага прадмета | 5 фунта |
| Даўжыня прадмета | 11.81 цалі |
| Уключаныя кампаненты | Impact Wrench, 6 Sockets, Storage Case |
| Святлодыёдны святло | так |
Гарантыя і падтрымка
For any questions, technical support, or warranty inquiries, please contact our customer support team. We are committed to providing dependable customer support to ensure your satisfaction with DIYtoolifz products.
Кантактны адрас электроннай пошты: support@diytoolifz.com