Yokomo RPX4 Competition ESC BL-RPX4 Instruction Manual

Уводзіны

This manual provides essential instructions for the proper setup, operation, and maintenance of your Yokomo RPX4 Competition Electronic Speed Controller (ESC). The RPX4 is designed for high-performance racing applications, offering advanced power delivery and precise control. It features state-of-the-art power MOS FET output characteristics and is engineered for both stock and modified motors.

Калі ласка, уважліва прачытайце гэтую інструкцыю перад выкарыстаннем прадукту, каб забяспечыць бяспечную і аптымальную прадукцыйнасць.

Змест пакета

Малюнак 1: Contents of the Yokomo RPX4 Competition ESC package. This includes the RPX4 ESC unit, silicone power cables (12AWG), a capacitor module, a cooling fan, a receiver connection cable, and mounting screws.

Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй прадметы:

• Yokomo RPX4 Electronic Speed Controller (ESC) Unit
• Silicone Power Cables (12AWG)
• Модуль кандэнсатара
• Cooling Fan (High RPM)
• Receiver Connection Cable
• Мантажныя шрубы (4 шт.)

Note: Fuel, batteries, paint, glue, oil, grease, and tools are not included and must be purchased separately.

Настройка

1. Mounting the ESC

1. Choose a suitable location on your chassis that allows for good airflow and easy access to connections.
2. Secure the ESC using double-sided tape or the provided mounting screws, ensuring it is firmly attached to prevent movement during operation.

2. Падключэнне правадоў

Proper wiring is crucial for performance and safety.

• Падключэнне рухавіка: Connect the three motor wires from the ESC to your brushless motor. Ensure correct phase matching (A-A, B-B, C-C). If the motor rotates in the wrong direction, swap any two of the motor wires.
• Падключэнне батарэі: Solder appropriate battery connectors (not included) to the provided silicone power cables. Connect the positive (+) lead (red) and negative (-) lead (black) from the ESC to your battery pack. Ensure polarity is correct to avoid damage.
• Падключэнне прымача: Plug the receiver connection cable from the ESC into the throttle channel (usually Channel 2) of your RC receiver.
• Capacitor Module: Connect the capacitor module to the designated port on the ESC. This helps stabilize power delivery.
• Вентылятар астуджэння: Connect the cooling fan to the "FAN" port on the ESC. Ensure the fan is oriented to draw air over the ESC for optimal cooling.

3. Transmitter Calibration

Before initial use, calibrate the ESC with your radio transmitter to ensure proper throttle range recognition. Refer to your transmitter's manual for specific calibration procedures. Generally, this involves:

1. Уключыце перадатчык.
2. Hold the throttle at full forward, then power on the ESC.
3. Wait for the ESC to beep, then move the throttle to full reverse.
4. Wait for the ESC to beep again, then return the throttle to neutral.
5. Wait for the final beep, indicating successful calibration.

Інструкцыя па эксплуатацыі

Уключэнне/выключэнне

• To power on, ensure your transmitter is on, then connect the battery to the ESC.
• To power off, disconnect the battery from the ESC.

Праграмаванне

The RPX4 ESC features programmable parameters to fine-tune its performance for different racing conditions and motor types.

• Зададзеныя праграмы: The ESC comes with preset programmed data optimized for various categories, making initial setup straightforward.
• External Programmer: For advanced adjustments, an external programmer from the BL-R26P series can be used. Ensure the programmer's firmware is updated to support the RPX4.
• Рэгуляваныя параметры: Parameters typically include throttle response, brake force, timing, boost, turbo, and various protection settings. Refer to the specific programmer's manual for detailed instructions on adjusting these settings.

Тэхнічнае абслугоўванне

• Уборка: Regularly clean the ESC and cooling fan to remove dirt, dust, and debris. Use a soft brush or compressed air. Ensure no moisture enters the unit.
• агляд: Periodically inspect all wires and connectors for signs of wear, damage, or loose connections. Replace any damaged components immediately.
• захоўванне: When not in use, store the ESC in a dry, cool place away from direct sunlight and extreme temperatures.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information and technical support, please refer to the official Yokomo website or contact your authorized Yokomo dealer. Keep your purchase receipt as proof of purchase.