eAhora FT01

Кіраўніцтва карыстальніка электрычнага ровара eAhora FT01

Мадэль: FT01

1. Introduction and Safety Warnings

This manual provides essential information for the safe assembly, operation, and maintenance of your eAhora FT01 Electric Bike. Please read it thoroughly before your first ride and keep it for future reference.

Важная інфармацыя па бяспецы:

  • Заўсёды апранайце шлем і адпаведную тэхніку бяспекі падчас язды.
  • Familiarize yourself with local regulations regarding electric bikes.
  • Перад кожнай паездкай праводзьце перадпаездку агляд, правяраючы тармазы, шыны і ўзровень зарада акумулятара.
  • Wear gloves during assembly to prevent injury.
  • Do not modify the bike's electrical system or motor.

2. Налада і зборка

The following steps guide you through the assembly process. For a visual guide, please refer to the embedded installation video.

Апісанне відэа: This video provides a detailed tutorial on unboxing and assembling the eAhora FT01 Electric Bike, covering each installation step from start to finish.

2.1 Unboxing and Parts Check

Carefully open the packaging and remove all components. Verify that all parts listed in the manual are present and undamaged. It is recommended to wear gloves during this process.

eAhora FT01 Electric Bike in blue

Апісанне малюнка: Поўны view of the eAhora FT01 Electric Bike, showcasinяго канструкцыю і кампаненты.

2.2 Устаноўка руля

Attach the handlebars to the stem. Ensure all bolts are securely tightened to prevent movement during operation. (Refer to video: 1:22 - 2:14)

2.3 Устаноўка пярэдняга кола

Install the front wheel onto the fork. Align the brake rotor with the caliper and secure the axle. (Refer to video: 2:14 - 2:43)

2.4 Front Fender Installation

Mount the front fender to the bike frame using the provided hardware. Ensure it is properly aligned over the front wheel. (Refer to video: 2:43 - 3:23)

2.5 Усталёўка фар

Attach the headlight to its designated mounting point on the front of the bike and connect the electrical cable. (Refer to video: 3:23 - 4:20)

2.6 Устаноўка педалі

Install the pedals. Note that pedals are marked 'L' for left and 'R' for right. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. (Refer to video: 4:20 - 5:23)

2.7 Усталёўка падстаўкі

Securely attach the kickstand to the bike frame. (Refer to video: 5:23 - 6:06)

3. Інструкцыя па эксплуатацыі

3.1 Turning On and PAS Adjustment

To power on the bike, insert the key into the battery lock and turn it to the 'ON' position, then press the power button on the display. Use the '+' and '-' buttons on the handlebar control to adjust the Pedal Assist System (PAS) level. (Refer to video: 6:06 - 6:37)

Intelligent LCD Color Display showing speed, battery, and PAS level

Апісанне малюнка: The intelligent LCD color display showing various ride metrics like speed, battery level, and pedal assist level.

3.2 Front Light and Horn Operation

The front light and horn are controlled by buttons on the handlebar. Press the light button to toggle the headlight on/off, and the horn button to activate the horn. (Refer to video: 6:37 - 6:50)

3.3 Дросельная засланка і тормазы

The eAhora FT01 features a half-twist throttle for electric-only propulsion. Gently twist the throttle to accelerate. The bike is equipped with dual hydraulic disc brakes for reliable stopping power. Squeeze the brake levers to engage the brakes. (Refer to video: 6:50 - 6:59)

Diagram illustrating dual hydraulic disc brakes

Апісанне малюнка: An illustration highlighting the dual hydraulic disc brake system for effective stopping.

3.4 Walk Mode

To activate walk mode, press and hold the '-' button on the handlebar control. This provides a low-speed assist for walking the bike. (Refer to video: 6:25 - 6:37)

4. Акумулятар і зарадка

The eAhora FT01 is powered by a 48V 30Ah removable battery, offering flexible charging options.

4.1 Removing and Installing the Battery

To remove the battery, unlock it with the key and slide it out from under the seat. To install, slide the battery back into place and lock it. (Refer to video: 6:59 - 7:23)

4.2 Зарадка акумулятара

The battery can be charged either while installed on the bike or removed. Connect the charger to the battery's charging port, then plug the charger into a standard wall outlet. The charger's indicator light will show charging status. (Refer to video: 7:23 - 8:12)

Diagram showing 48V 30Ah battery with charging details

Апісанне малюнка: An infographic detailing the 48V 30Ah battery's capacity, charging time, and power-saving features.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and safe operation of your eAhora FT01 Electric Bike.

  • Сыход за батарэяй: Avoid fully discharging the battery. Charge regularly, especially if storing for extended periods. The battery is designed to retain 80% capacity after 800+ cycles.
  • Ціск у шынах: Check tire pressure regularly. The 20x4.0" fat tires require specific pressure for optimal performance and safety.
  • тармазы: Inspect brake pads and rotors for wear. Ensure hydraulic brake fluid levels are adequate.
  • Ланцуг: Keep the chain clean and lubricated for smooth operation and to prevent rust.
  • Зашпількі: Перыядычна правярайце ўсе балты і крапежныя элементы на надзейнасць зацягвання.
  • Уборка: Ачысціце ровар damp тканінай. Пазбягайце мыцця пад высокім ціскам непасрэдна на электрычныя кампаненты.

6. Выпраўленне непаладак

If you encounter issues with your eAhora FT01, consider the following basic troubleshooting steps:

  • Няма харчавання: Check if the battery is properly installed and locked, and if it has sufficient charge. Ensure the key is in the 'ON' position and the power button on the display is pressed.
  • Motor Not Engaging: Verify the PAS level is set above 0. Check if the brake levers are fully released, as some systems prevent motor engagement when brakes are applied.
  • Brake Issues: If brakes feel spongy or ineffective, they may need adjustment or bleeding. Consult a professional bike mechanic.
  • Памылкі адлюстравання: Refer to the display's error code section in the full manual (if available) or contact customer support.

For complex issues, it is recommended to contact eAhora customer support or a certified electric bike technician.

7. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
Тып ровараЭлектрычны ровар
Магутнасць рухавіка1700 Вт (пікавая)
Максімальная хуткасць36 міль у гадзіну
акумулятар48V 30Ah (30000 mAh)
ДыяпазонUp to 90 miles (PAS mode)
Час зарадкіApprox. 10 hours (with 54.6V 3A fast charger)
Тып падвескіDual (Full Suspension, 130mm front fork travel)
Тормазны стыльДвайныя гідраўлічныя дыскавыя тармазы
Памер колы20 цаляў (шырокія шыны)
Матэрыял каркасаВугляродзістай сталі
Максімальная грузападымальнасць280-300 фунтаў
Рэкамендуемая вышыня170 м — 190 м
Рэжымы яздыPure Electric, Pedal-Assist, Manpower
eAhora FT01 Electric Bike dimensions and specifications

Апісанне малюнка: A diagram illustrating the key dimensions and specifications of the eAhora FT01 Electric Bike.

8. Гарантыя і падтрымка

Your eAhora FT01 Electric Bike comes with a 1-year warranty and lifetime technical support from the eAhora professional service team.

Кантактная інфармацыя:

  • тэлефон: +1 551-246-0188
  • электронная пошта: amazon@eahoraebike.com
  • Webсайт: Visit the official eAhora webсайт для дадатковай падтрымкі і рэсурсаў.
eAhora customer service team with contact details and 1-year warranty badge

Апісанне малюнка: An image showing the eAhora customer service team and contact information, highlighting the 1-year warranty and lifetime technical support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.