LEDOne Corp LED Wall Pack Instruction Manual

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LEDOne Corp Multi-Watt LED Wall Pack. This fixture is designed for demanding outdoor lighting applications, offering selectable wattage (80W, 100W, 120W) and adjustable color temperature (3000K, 4000K, 5000K) to meet various lighting requirements efficiently.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Рызыка паражэння электрычным токам. Устаноўка павінна выконвацца кваліфікаваным электрыкам у адпаведнасці з усімі нацыянальнымі і мясцовымі электрычнымі нормамі.

• Перад устаноўкай або абслугоўваннем адключыце электрычнасць з дапамогай аўтаматычнага выключальніка.
• Забяспечыць пастаўку абtage is compatible with the fixture's operating voltagе (120-277В).
• Do not handle energized fixtures with wet hands or when standing on wet or damp паверхні.
• Use only UL/ETL approved components and wiring methods.
• Пераканайцеся, што прыстасаванне надзейна замацавана, каб прадухіліць падзенне.
• Не глядзіце непасрэдна ў святлодыёдную крыніцу святла, калі яна падсвятляецца.

3. Змесціва ўпакоўкі

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя:

• LEDOne Corp LED Wall Pack Fixture
• Інструкцыя па эксплуатацыі (гэты дакумент)
• Мантажнае абсталяванне

4. Тэхнічныя характарыстыкі

5. Настройка і ўстаноўка

The LEDOne Corp Wall Pack is designed for wall mounting and compatibility with standard junction boxes. Follow these steps for secure installation:

1. Падрыхтоўка: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, drill, mounting hardware).
2. Месца мантажу: Select a suitable wall surface capable of supporting the fixture's weight (approximately 10.63 lbs). The fixture features reinforced mounting points.
3. Мантажны кранштэйн: Attach the wall mount bracket (if separate) or position the fixture directly over the junction box. Mark and drill pilot holes for the mounting screws.
4. Бяспечнае прыстасаванне: Secure the fixture to the wall using the provided mounting hardware. Ensure it is firmly attached and level.
5. Праводка: Open the wiring compartment. Connect the fixture's wires to the supply wires from the junction box:
   • Black wire to Line (L)
   • White wire to Neutral (N)
   • Green wire to Ground (G)
   Use the provided waterproof wire nuts for secure outdoor connections. For 0-10V dimming, connect the purple wire to DIM+ and the gray wire to DIM-.
6. Зачыніць адсек: Carefully tuck all wires into the junction box and wiring compartment. Close and seal the compartment cover to maintain IP65 rating.
7. Уключэнне: Аднавіце электразабеспячэнне на аўтаматычны выключальніку і праверце прыбор.

Малюнак 1: ззаду view of the LED wall pack, illustrating the mounting points and the central access for electrical wiring connections.

Малюнак 2: Бакавы прафесіяналfile of the LED wall pack, showing the robust construction and a visible screw for secure mounting.

6. Інструкцыя па эксплуатацыі

The LEDOne Corp Wall Pack features adjustable wattage and color temperature settings, typically controlled by internal switches. These switches are usually located within the wiring compartment or on the side of the LED driver housing, accessible after opening the fixture.

Выява 3: Спераду view of the LED wall pack with the protective lens removed, revealing the array of LED chips and the internal switches for adjusting wattagе і CCT.

1. Рэгуляванне Ватtage:
   • Ensure power is disconnected before opening the fixture.
   • Знайдзіце ватtage selection switch (often labeled WATT or POWER).
   • Выберыце патрэбны ватtage: 80W, 100W, or 120W.
   • Close the fixture securely before restoring power.
2. Adjusting Color Temperature (CCT):
   • Ensure power is disconnected before opening the fixture.
   • Locate the CCT selection switch (often labeled CCT or TEMP).
   • Select the desired color temperature: 3000K (warm white), 4000K (cool white), or 5000K (daylight).
   • Close the fixture securely before restoring power.
3. Зацямненне 0-10 В: This fixture supports 0-10V dimming. Connect a compatible 0-10V dimmer to the purple (DIM+) and gray (DIM-) wires during installation.
4. Photocell/Motion Sensor: The fixture may include or be compatible with external photocells or motion sensors for automated operation. Refer to the specific sensor's instructions for integration.

Малюнак 4: Пад вуглом view of the LED wall pack, showcasing its complete assembly and the illuminated LED array.

7. Тэхнічнае абслугоўванне

The LEDOne Corp Wall Pack is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• Уборка: Periodically clean the outer lens and housing with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• агляд: Annually inspect the fixture for any signs of physical damage, loose connections, or wear on the wiring. Address any issues promptly.
• Пячаткі: Ensure all seals and gaskets are intact to maintain the IP65 weatherproof rating.

8. Выпраўленне непаладак

If the fixture is not operating correctly, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact LEDOne Corp customer support.

9. Інфармацыя аб гарантыі

The LEDOne Corp Multi-Watt LED Wall Pack is backed by a comprehensive Гарантыя 5 год. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or detailed terms and conditions, please contact LEDOne Corp customer support.

10. Падтрымка і кантакты

For further assistance, technical support, or inquiries regarding your LEDOne Corp product, please visit the official LEDONE Store or contact customer service:

Visit the LEDONE Store on Amazon