TOOLCY B0FJRZVPJX

TOOLCY Super Flexible Pressure Washer Hose & Gun Instruction Manual

Model: B0FJRZVPJX

Уводзіны

This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of your TOOLCY Super Flexible Pressure Washer Hose and 5000 PSI Pressure Washer Gun. Please read this manual thoroughly before operating the product and retain it for future reference.

Інфармацыя па бяспецы

WARNING: Pressure washers can cause serious injury if not used correctly. Always follow these safety guidelines:

  • Always wear appropriate personal protective equipment, including eye protection, gloves, and hearing protection.
  • Ніколі не накіроўвайце распыляльнік на людзей, хатніх жывёл або электрычныя прылады.
  • Перад пачаткам працы пераканайцеся, што ўсе злучэнні надзейныя.
  • Do not operate if any part of the equipment is damaged.
  • Трымайце дзяцей і навакольных далей ад працоўнай зоны.
  • Always relieve pressure before disconnecting the hose or gun.
  • Use only with compatible pressure washer units within the specified PSI limits.

Змест пакета

Пры распакаванні пераканайцеся, што ўсе прадметы ёсць у наяўнасці і не пашкоджаны:

  • 1x TOOLCY Super Flexible Pressure Washer Hose (30ft, 3400 PSI)
  • 1x TOOLCY Pressure Washer Gun (5000 PSI / 10.5 GPM)
  • M22 and 3/8" Quick Connection Kit (various adapters)
TOOLCY Pressure Washer Hose and Gun Kit with various connectors
Image 1: Contents of the TOOLCY Pressure Washer Hose and Gun Kit, including the blue flexible hose, the black and grey pressure washer gun, and a set of brass and black quick connectors.

Настройка

  1. Connect the Hose to the Pressure Washer:

    Attach one end of the TOOLCY pressure washer hose to the high-pressure outlet of your pressure washer unit. Ensure a secure, leak-free connection. Use the appropriate M22 or 3/8" quick connector as needed for your specific pressure washer model.

  2. Connect the Gun to the Hose:

    Attach the other end of the TOOLCY pressure washer hose to the inlet of the TOOLCY pressure washer gun. The gun features a 360° swivel inlet for flexible operation, allowing for easier maneuvering and reducing hose tangles. Ensure this connection is also secure.

    TOOLCY Pressure Washer Gun with 360 degree swivel inlet connected to hose
    Малюнак 2: Крупны план view of the TOOLCY pressure washer gun's 360-degree swivel inlet, showing how the hose connects to allow for flexible rotation during use, preventing tangles.
  3. Падключэнне водазабеспячэння:

    Connect your pressure washer unit to a suitable water supply according to its manufacturer's instructions.

  4. Attach Nozzle (Not Included):

    Attach your desired spray nozzle (not included with this kit) to the quick-connect fitting at the end of the pressure washer gun.

Інструкцыя па эксплуатацыі

  1. Пачаць падачу вады:

    Turn on the water supply to the pressure washer unit. Squeeze the trigger on the pressure washer gun to purge air from the system until a steady stream of water emerges.

  2. Запусціце мыйку высокага ціску:

    Start your pressure washer unit according to its manufacturer's instructions.

  3. Пачаць уборку:

    Hold the pressure washer gun firmly with both hands. Maintain a safe distance from the surface being cleaned. Squeeze the trigger to begin spraying. The ergonomic design and lightweight trigger of the TOOLCY gun reduce fatigue during extended use.

    User holding TOOLCY pressure washer gun with ceramic trigger
    Image 3: A hand demonstrating the grip on the TOOLCY pressure washer gun, highlighting its ergonomic handle with TPR rubber grip and ceramic trigger for comfortable and low-vibration operation.
  4. Adjust Spray (with Nozzle):

    Adjust the spray pattern by changing nozzles (if applicable) or adjusting the nozzle on your pressure washer gun to suit the cleaning task.

  5. Скончыць аперацыю:

    When finished, release the trigger, turn off the pressure washer unit, and then turn off the water supply. Squeeze the trigger again to relieve any remaining pressure in the system before disconnecting.

Тэхнічнае абслугоўванне

  • Праверка шланга: Regularly inspect the pressure washer hose for cuts, abrasions, bulges, or leaks. Replace the hose immediately if any damage is found. The TOOLCY hose is designed to be kink-resistant and durable, but proper care extends its lifespan.
  • Gun Inspection: Check the pressure washer gun for any cracks, leaks, or damage to the trigger mechanism. Ensure the swivel inlet rotates smoothly.
  • Праверка злучэння: Periodically check all quick connections and threaded fittings for tightness and wear. Replace O-rings or seals if leaks occur.
  • Уборка: After each use, flush the hose and gun with clean water to remove any detergent or debris. Wipe down the exterior surfaces.
  • захоўванне: Store the hose and gun in a cool, dry place, away from direct sunlight and freezing temperatures. Coil the hose neatly to prevent kinks.
    • Diagram showing internal structure of a kink-resistant pressure washer hose
    Image 4: An illustrative diagram of the internal construction of a pressure washer hose, highlighting features that prevent kinking, bubbling, and bursting, contributing to its durability.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
No water flow or low pressure from gun
  • Падача вады адключана або абмежавана
  • Паветра ў сістэме
  • Шланг перагнуты або заблакаваны
  • Насадка забітая
  • Пераканайцеся, што падача вады цалкам адкрыта.
  • Purge air by squeezing trigger with water on, before starting pressure washer.
  • Straighten hose; check for internal blockages.
  • Ачысціце або заменіце сопла.
Уцечкі ў злучэннях
  • Няшчыльныя сувязі
  • Зношаныя ўшчыльняльныя кольцы або ўшчыльняльнікі
  • Выкарыстоўваецца няправільны адаптар
  • Надзейна зацягніце ўсе злучэнні.
  • Праверце і заменіце пашкоджаныя ўшчыльняльныя кольцы або ўшчыльняльнікі.
  • Ensure correct M22 or 3/8" quick connectors are used for your setup.
Hose kinking during use
  • Improper coiling or storage
  • Extreme bending during operation
  • Uncoil hose fully before use.
  • Avoid sharp bends; the hose is designed to be flexible and kink-resistant, but extreme angles can still cause issues.

Тэхнічныя характарыстыкі

  • Даўжыня шланга: 30 футы
  • Hose Inner Diameter: 1/4 цалі
  • Hose Max Pressure: 3400 PSI
  • Hose Max Temperature: 140°F / 60°C
  • Gun Max Pressure: 5000 PSI
  • Gun Max Flow Rate: 10.5 GPM
  • Gun Inlet: M22-14mm (standard) with 360° swivel
  • Gun Outlet: 1/4 inch Quick Connect
  • Сумяшчальнасць: Universal replacement for most gas power washers up to 7hp/220cc and electric pressure washers. Compatible with brands like Ryobi, Dewalt, Greenworks, Karcher, Craftsman, Honda, Troy Bilt, Generac, Flexzilla, Simpson. Note: Not compatible with Sun Joe, AR Blue Clean, or other pressure washers with M22-15mm hoses without an additional adapter (M22-14mm Female to M22-15mm Male, sold separately).

Гарантыя і падтрымка

For warranty information or technical support, please contact TOOLCY customer service through the retailer where the product was purchased or visit the official TOOLCY website. Please have your product model number (B0FJRZVPJX) and purchase date available when contacting support.

You can visit the TOOLCY Store for more information: TOOLCY Official Store