MOUNTUP Heavy Duty Single Monitor Arm and VESA Extender User Manual

Важная інфармацыя па бяспецы

Калі ласка, уважліва прачытайце гэта кіраўніцтва перад устаноўкай і выкарыстаннем. Захоўвайце гэта кіраўніцтва для далейшага выкарыстання.

• Ёмістасць вагі: Do not exceed the maximum weight capacity of 33 lbs (15 kg). Exceeding this limit may result in serious injury or property damage.
• Памер манітора: The monitor arm supports monitors up to 42 inches. The VESA extender supports monitors from 17 to 35 inches. Ensure your monitor's size and weight are within these limits.
• Сумяшчальнасць VESA: The arm supports VESA patterns 75x75mm and 100x100mm. The extender converts these to 200x100mm and 200x200mm. Verify your monitor's VESA pattern before installation.
• Таўшчыня стала: C-clamp requires a desk thickness between 0.39 inches (10mm) and 2.76 inches (70mm). Ensure your desk can support the combined weight of the arm, monitor, and extender.
• зборка: Assemble the product according to the instructions. Improper assembly may cause damage or serious personal injury.
• Рухомыя часткі: This product contains moving parts. Exercise caution during adjustment to avoid pinching or crushing injuries.
• Тэхнічнае абслугоўванне: Periodically check all screws and connections to ensure they are secure. Retighten as necessary.

Змест пакета

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact MOUNTUP customer support.

• Зборка кранштэйна манітора
• C-Clamp База
• VESA Extender Bracket (2 pieces)
• VESA Extender Plate
• Камплект фурнітуры (шрубы, шайбы, распоркі, шасцігранныя ключы)

Выява: Зверхуview of the MOUNTUP Heavy Duty Single Monitor Arm, including the main arm, C-clamp, and the VESA extender components.

Тэхнічныя характарыстыкі

Image: Illustration highlighting the monitor arm's robust load capacity of up to 33 lbs.

Image: Diagram showing the monitor arm's height adjustment range from 9.3 to 22.1 inches and a maximum extension of 23.8 inches.

Настройка і ўстаноўка

Step 1: Install the C-Clamp База

1. Змесціце C-clamp base on the edge of your desk.
2. Ensure the desk thickness is between 0.39 and 2.76 inches.
3. Зацягніце C-clamp screw until the base is securely fastened to the desk. Do not overtighten.

Image: The monitor arm's C-clamp securely attached to a desk, demonstrating its stable mounting.

Image: A visual comparison highlighting the wider and more stable design of the MOUNTUP C-clamp compared to a standard clamp.

Step 2: Assemble the VESA Extender (if needed)

If your monitor has a VESA pattern larger than 100x100mm (e.g., 200x100mm or 200x200mm), use the VESA extender bracket.

1. Attach the two extender brackets to the VESA extender plate using the provided screws. Ensure the ridge on the extender plate aligns with the brackets for a secure fit.
2. Securely fasten the extender assembly to your monitor's VESA mounting holes using the appropriate screws from the hardware kit.

Image: Step-by-step visual guide for assembling the VESA extender brackets onto the main plate using screws.

Выява: Падрабязны view of the VESA extender plate, showing its design for adapting to various VESA patterns.

Image: A diagram illustrating the various VESA patterns (200x100mm, 150x150mm, 200x200mm, 100x200mm) supported by the extender.

Image: A visual comparison showing a monitor that previously could not be mounted (before) and how the VESA extender enables mounting for larger VESA patterns (after).

Step 3: Attach Monitor to Arm

1. Slide the monitor (with or without the VESA extender attached) onto the VESA head of the monitor arm.
2. Secure the monitor to the VESA head using the provided screws. Ensure all screws are tightened to prevent the monitor from detaching.

Інструкцыя па эксплуатацыі

Рэгуляванне становішча манітора

The MOUNTUP monitor arm allows for flexible adjustment of your monitor's position to achieve optimal ergonomics.

• Рэгуляванне вышыні: Gently push or pull the monitor up or down to the desired height. The gas spring mechanism will hold it in place.
• Рэгуляванне нахілу: Tilt the monitor screen up or down to reduce glare and find a comfortable viewкут нахілу.
• Рэгуляванне павароту: Rotate the monitor horizontally (left or right) to share your screen or change viewнага кірунку.
• Рэгуляванне кручэння: Павярніце манітор на 360 градусаў, каб пераключацца паміж альбомнай і партрэтнай арыентацыяй.

Рэгуляванне нацяжэння

If the monitor arm is too stiff or too loose, you may need to adjust the gas spring tension.

• Locate the tension adjustment screw on the arm (usually near the pivot points).
• Use the provided Allen wrench to turn the screw:
  • Паварот clockwise (-) каб паменшыць tension (for lighter monitors or if the arm is too stiff).
  • Паварот counter-clockwise (+) каб павелічэнне tension (for heavier monitors or if the arm sags).
• Adjust gradually and test the arm's movement after each adjustment until it holds your monitor securely at any position.

Тэхнічнае абслугоўванне

• Уборка: Wipe the monitor arm and VESA extender with a soft, damp тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў, якія могуць пашкодзіць пакрыццё.
• Перыядычныя праверкі: Regularly inspect all screws and connections (C-clamp, VESA plate, arm joints) to ensure they remain tight. Retighten any loose fasteners to maintain stability and safety.
• змазка: The gas spring mechanism is maintenance-free and does not require lubrication.

Ліквідацыю непаладак

Monitor Sags or Does Not Hold Position

• рашэнне: The gas spring tension is likely too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise (+) with the provided Allen wrench until the arm can hold the monitor in place.
• Праверце вагу: Ensure your monitor's weight is within the 4.4 - 33 lbs capacity.

Arm is Too Stiff to Move

• рашэнне: The gas spring tension is likely too high. Decrease the tension by turning the adjustment screw clockwise (-) with the provided Allen wrench.

Monitor Wobbles

• рашэнне: Check if the C-clamp is securely tightened to the desk. Ensure all VESA mounting screws are tight. Verify that the monitor arm joints are properly secured.
• Desk Stability: Ensure your desk itself is stable and not prone to wobbling.

Гарантыя і падтрымка

MOUNTUP products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official MOUNTUP webсайт.

If you encounter any issues or have questions regarding the installation or operation of your MOUNTUP Heavy Duty Single Monitor Arm and VESA Extender, please contact MOUNTUP customer support for assistance.

Кантактная інфармацыя: Please refer to your product packaging or the MOUNTUP official webсайт, каб знайсці найбольш актуальную кантактную інфармацыю службы падтрымкі кліентаў.