Andeman Ep155 & Ep177 Car Jump Starter with Air Compressor User Manual

1. Уводзіны

This manual provides essential information for the safe and effective operation of your Andeman Ep155 or Ep177 Car Jump Starter with Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed to jump start 12V vehicles and, for the Ep177 model, also functions as a portable tire inflator and power bank.

2. Інфармацыя па бяспецы

WARNING: Improper use can result in injury or damage to the device and vehicle. Always follow these safety guidelines.

Захоўваць у месцах, недаступных дзецям.
Не апускайце прыладу ў ваду.
Забараняецца працаваць у выбуханебяспечнай атмасферы, напрыклад, у прысутнасці гаручых вадкасцей, газаў або пылу.
Забяспечце належную вентыляцыю падчас выкарыстання.
Do not disassemble the device. Contact qualified service personnel for repairs.
Avoid direct exposure to sunlight or high temperatures.
Use only the provided smart clamps і аксесуараў.
Перад выкарыстаннем пераканайцеся, што прылада цалкам зараджана для аптымальнай прадукцыйнасці.
The device features 10 advanced safety protections, including Overload Protection, Sparks Protection, Reverse Charges Protection, Reverse Polarities Protection, Over Currents Protection, Low Temperature Protection, Over Charges Protection, and Short Circuits Protection.

Diagram illustrating 10 safety protections of the Andeman jump starter — Figure 2.1: The Andeman jump starter incorporates 10 safety protections for secure operation, including safeguards against overcharge, over-discharge, overcurrent, short circuit, overvoltage, reverse connection, over temperature, voltage regulation, reverse charge, and reverse polarity.

3. Прадукт скончыўсяview і кампаненты

Your Andeman Car Jump Starter is a multi-functional device designed for emergency vehicle starting, and for the Ep177 model, also includes a portable air compressor and power bank capabilities.

Andeman jump starter with smart clamps and inflation nozzles — Figure 3.1: The Andeman jump starter unit shown with its smart battery clamps and various inflation nozzles for different applications.

Andeman jump starter demonstrating both jump start and tire inflation functions — Figure 3.2: This image highlights the dual functionality of the Ep177 model, serving as both a 4000A jump starter and a 150PSI tire inflator.

Змест пакета:

Andeman Car Jump Starter (Ep155 or Ep177)
Разумны акумулятар Clamps
Зарадны кабель USB-C
Inflation Nozzles (for Ep177 model)
Кіраўніцтва карыстальніка

4. Тэхнічныя характарыстыкі

Асаблівасць	Ep155 Model	Ep177 Model
Пікавы ток	3000А	4000А
Ёмістасць батарэі	20000 мАг	24000 мАг
Сумяшчальнасць рухавікоў (бензін)	Да 9.0л	Да 8.5л
Сумяшчальнасць рухавікоў (дызель)	Да 7.0л	Да 7.0л
Starts per Charge	Да 80 разоў	Да 70 разоў
Час чакання	24 месяцаў	48 месяцаў
Air Compressor (PSI)	Н/Д	Up to 150PSI
Charging Input (Type-C)	5V/3A, 9V/2A, 12V/1.5A
Выхад USB-A	QC3.0
Выхад USB-B	5 В/3 А
Выхад пастаяннага току	15В
Час поўнай зарадкі	Прыкладна 1.8 гадзіны
Святлодыёдны ліхтарык	240 Lumens, 36 hours battery life

Andeman 4000A Jump Starter connected to a car battery in an engine bay — Figure 4.1: The Ep177 model, a 4000A jump starter, is suitable for various 12V vehicles, capable of starting 8.5L gas or 7L diesel engines.

5. Настройка і зарадка

5.1 Першапачатковая плата

Before first use, fully charge the jump starter. Connect the provided USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The device supports bi-directional fast charging, achieving a full charge from 0% to 100% in approximately 1.8 hours.

Andeman jump starter being charged via Type-C cable in a car console — Figure 5.1: The jump starter can be fast-charged via its Type-C port, allowing for quick readiness. A 10-minute charge can provide enough power for a jump start.

5.2 Праверка ўзроўню зарада батарэі

The device features a digital display or indicator lights to show the current battery level. Ensure the device has sufficient charge before attempting to jump start a vehicle or inflate tires.

6. Інструкцыя па эксплуатацыі

6.1 Запуск аўтамабіля з дапамогай адскока

Пераканайцеся, што стартар зараджаны як мінімум на 50%.
Выключыце запальванне аўтамабіля і ўсё аксэсуары.
Падключыце чырвоны (+) клamp да станоўчай (+) клемы акумулятара аўтамабіля.
Падключыце чорны (-) клamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the engine block.
Падключыце смарт -клamp connector into the jump starter's port. The indicator light on the smart clamp should turn green, indicating a correct connection. If it's red or flashing, check connections and battery voltage.
Start the vehicle. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
Once the vehicle starts, immediately disconnect the smart clamp connector from the jump starter.
Remove the black (-) clamp спачатку, потым чырвоны (+) clamp ад акумулятара аўтамабіля.

6.2 Using the Air Compressor (Ep177 Model Only)

The Ep177 model features a built-in air compressor capable of delivering up to 150PSI.

Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
Power on the jump starter. The current tire pressure will be displayed.
Use the '+' and '-' buttons to set the desired pressure.
Press the inflation button to start the compressor. The compressor will automatically stop once the preset pressure is reached.
Disconnect the air hose from the tire valve.

Note: For continuous use, it is recommended to rest the compressor for 10 minutes after every 10 minutes of operation to prevent overheating. A full charge can inflate 195/60 R15 tires from 0 to full approximately 4-5 times.

Andeman jump starter with digital display showing tire pressure and inflation icons — Figure 6.1: The Ep177 model's digital display shows current pressure and allows setting target pressure for tire inflation. It can inflate various items including car, motorcycle, bicycle tires, and sports equipment.

6.3 Выкарыстанне ў якасці паўэрбанка

The jump starter can also function as a portable power bank to charge electronic devices.

Connect your device's charging cable to the appropriate output port on the jump starter (USB-A QC3.0, USB-B 5V/3A, or Type-C 5V/3A, 9V/2A, 12V/1.5A).
The device will automatically begin charging.
The DC15V output port can power compatible devices like tire inflators (if not using the built-in one) or car refrigerators.

Andeman jump starter charging multiple devices like a laptop, smartwatch, and smartphone — Figure 6.2: The 24000mAh capacity allows the jump starter to serve as a power bank, compatible with over 1000 devices, including laptops, smartwatches, and smartphones.

6.4 Выкарыстанне святлодыёднага ліхтарыка

The built-in 240 lumens LED flashlight offers multiple modes for various situations.

Press the flashlight button once to turn on the steady light.
Press again for SOS mode (flashing slowly).
Press a third time for Strobe mode (flashing rapidly).
Націсніце чацвёрты раз, каб выключыць ліхтарык.

The flashlight provides up to 36 hours of battery life.

Andeman jump starter's LED flashlight illuminating various scenarios like camping, roadside emergency, power failure, and car repair — Figure 6.3: The 240 lumens LED flashlight provides illumination for outdoor camping, roadside emergencies, power failures, and car repair tasks.

7. Тэхнічнае абслугоўванне

7.1 Зарадка

To maintain optimal battery health, recharge the jump starter every 3-6 months, even if not in use. This prevents deep discharge and extends battery life.

7.2 Захоўванне

Захоўвайце прыладу ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
Keep the device and accessories in the provided carrying case to protect them from damage.

7.3 Ачыстка

Працірайце прыладу мяккай сухой тканінай. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі.

8. Выпраўленне непаладак

8.1 Аўтамабіль не заводзіцца

Праверце ўзровень зарада батарэі: Ensure the jump starter has sufficient charge.
Праверце злучэнні: Verify that the smart clamps are securely connected to the correct battery terminals (red to positive, black to negative).
Разумны клamp індыкатар: If the indicator is red or flashing, refer to the smart clamp's instructions for error codes.
Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, the jump starter may not be able to start it.

8.2 Air Compressor Not Working (Ep177 Only)

Праверце ўзровень зарада батарэі: Ensure the jump starter has sufficient charge.
Падлучэнне шланга: Verify the air hose is securely connected to both the device and the tire valve.
Перагрэў: If the compressor has been running for an extended period, it may have overheated. Allow it to cool down for 10-15 minutes before attempting to use it again.

8.3 Прылада не зараджаецца

Кабель: Ensure the USB-C charging cable is not damaged and is properly connected.
Адаптар сілкавання: Verify the USB power adapter is functional and provides adequate power output.

9. Гарантыя і падтрымка

Your Andeman jump starter is UL Certified, ensuring it meets stringent safety standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Andeman webсайт.

For further assistance, please contact Andeman customer support.