SILCA Ultimate Tubeless Tire Sealant 1L Instruction Manual

1. Уводзіны

The SILCA Ultimate Tubeless Tire Sealant is a high-performance solution designed for tubeless bicycle tires. This 1-liter bottle contains a natural and synthetic latex blend with injectable FiberFoam technology, engineered to proactively seal punctures up to 7.5mm. It maintains its liquid state for over 6 months in various weather conditions, offering reliable protection for mountain, gravel, and road bikes.

Асноўныя функцыі ўключаюць у сябе:

• Хуткі і эфектыўны: Quickly seals punctures up to 7.5 mm, providing 25% more coverage than conventional sealants. Compatible with all tubeless tires and valve cores.
• FiberFoam Technology: Utilizes small strand carbon fibers to create a strong 'fiber dam' for rapid sealing with minimal air loss. These fibers are 400% stiffer than fiberglass.
• Лёгка наносіць: Can be injected through valve cores for mess-free installation (injector sold separately) or poured directly into the tire.
• Высокая прадукцыйнасць: CO2 safe and effective in temperatures as low as 10°F (-15°C) for all-season reliability.
• Даўгавечны: The hybrid latex formula remains liquid for 6+ months (weather dependent), reducing the frequency of sealant top-offs.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ:

• ALLERGY ALERT: Contains latex. May cause an allergic skin reaction.
• НЕ глытаць.
• AVOID CONTACT WITH EYES.
• Захоўваць у месцах, недаступных дзецям.
• Avoid breathing mist/vapour.
• Апранайце ахоўныя пальчаткі / ахоўнае адзенне / сродкі абароны вачэй / асобы.
• IF ON SKIN: Wash with plenty of water and soap.
• IF skin irritation or rash occurs: Get medical advice/attention.
• Зняць забруджанае адзенне і памыць яго перад паўторным выкарыстаннем.
• Утылізуйце змесціва/кантэйнер у адпаведнасці з мясцовымі правіламі.
• Тэмпература замярзання: Effective down to -10°C to -15°C (14°F to 5°F). Performance below this temperature is not guaranteed.

3. Усталёўка і прымяненне

Before application, ensure the sealant bottle is shaken well to ensure proper mixing of the FiberFoam technology.

3.1. Sealant Quantity Guide

Refer to the table below to determine the appropriate amount of sealant for your tire type and size. These are recommended amounts per tire.

Image: SILCA Ultimate Sealant Fill Guide. This table provides recommended sealant volumes in milliliters and fluid ounces for different tire diameters (26in, 29er, 700c, 650b) and widths.

3.2. Application Methods

There are two primary methods for applying SILCA Ultimate Tubeless Tire Sealant:

Method 1: Direct Pour

This method involves unseating a portion of the tire bead and pouring the sealant directly into the tire cavity.

1. Carefully unseat one side of the tire bead from the rim.
2. Pour the recommended amount of SILCA Ultimate Sealant directly into the tire.
3. Re-seat the tire bead onto the rim.
4. Inflate the tire to your desired pressure.

Image: Direct Pour Method. A hand is shown pouring sealant directly into an unseated bicycle tire.

Method 2: Through Valve Injection

This method allows for mess-free installation without removing the tire from the rim, using a sealant injector (sold separately).

1. Deflate the tire completely.
2. Remove the valve core from the Presta or Schrader valve.
3. Attach a sealant injector (e.g., SILCA Ultimate Sealant Injector) to the valve stem.
4. Inject the recommended amount of sealant into the tire.
5. Remove the injector and reinstall the valve core.
6. Inflate the tire to your desired pressure.

Image: Through Valve Injection Method. A hand is shown injecting sealant into a bicycle tire through the valve stem.

4. Інструкцыя па эксплуатацыі

Once installed, SILCA Ultimate Tubeless Tire Sealant actively works to protect your tires. The FiberFoam technology allows the sealant to quickly locate and seal punctures as they occur, minimizing air loss and allowing you to continue your ride.

• Puncture Sealing: The sealant is designed to seal punctures up to 7.5mm in diameter. Upon a puncture, the sealant and carbon fibers will rush to the opening and form a durable seal.
• CO2 Compatibility: This sealant is CO2 safe, meaning it will not coagulate or lose effectiveness when exposed to CO2 cartridges used for emergency inflation.
• Дыяпазон тэмператур: The sealant performs reliably in a wide range of temperatures, down to 10°F (-15°C).

Image: Puncture Sealing. A close-up of a bicycle tire with sealant actively sealing a hole.

Image: All-Season Reliability. A cyclist rides through a snowy landscape, demonstrating the sealant's performance in cold conditions.

5. Тэхнічнае абслугоўванне

To ensure continuous protection, regular maintenance of your tubeless setup is recommended:

• Даўгавечнасць: The sealant remains liquid for 6+ months under normal conditions. However, environmental factors like extreme heat or frequent riding can affect its lifespan.
• Рэгулярныя праверкі: Periodically check the amount of liquid sealant inside your tires. This can be done by shaking the wheel and listening for the sloshing sound of the liquid.
• Top-Offs: If the sealant level is low, add more sealant using the through-valve injection method to maintain optimal performance.

Image: Long-Lasting Protection. Various sizes of SILCA Ultimate Sealant bottles are displayed, highlighting the product's 6+ month longevity.

6. Выпраўленне непаладак

• Sealant Leaking from Valve Stem: If sealant is observed leaking from the valve stem, ensure the valve core is tightly secured. This can sometimes occur if the valve core is not fully tightened or if the sealant has accumulated around the valve.
• Sealant Freezing: The sealant has a freezing point between -10°C and -15°C (14°F to 5°F). Riding in temperatures below this range may compromise the sealant's effectiveness. If the sealant freezes, it may not seal punctures effectively, and the tire's balance could be affected. Allow the sealant to thaw in warmer temperatures before use.
• Пастаянныя ўцечкі: For persistent leaks that the sealant does not seal, inspect the tire for larger damage that exceeds the sealant's 7.5mm capacity. The tire may require a patch or replacement. Also, check the tire bead for proper seating on the rim.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

Specific warranty details for the SILCA Ultimate Tubeless Tire Sealant are not provided in the product information. For any warranty inquiries or product support, please contact SILCA directly through their official webсайт або каналы абслугоўвання кліентаў.

Афіцыйны Webсайт: silca.cc