Aimpoint Duty RDS

Aimpoint Duty RDS Red Dot Reflex Sight 2 MOA dot User Manual

Model: Duty RDS | Brand: Aimpoint

1. Прадукт скончыўсяview

The Aimpoint Duty RDS Red Dot Reflex Sight is a robust and reliable optical sight designed for rapid target acquisition. Featuring a precise 2 MOA dot, it offers exceptional battery life and durability for various applications. This manual provides essential information for the proper setup, operation, and maintenance of your Duty RDS sight.

Aimpoint Duty RDS Red Dot Reflex Sight with lens covers open

Figure 1: Aimpoint Duty RDS Red Dot Reflex Sight with front and rear lens covers open, showcasing the optical path.

2. Уключаныя кампаненты

  • Aimpoint Duty RDS Red Dot Reflex Sight
  • One-piece Torsion Nut Mount
  • Spacer for mount
  • Allen T10 wrench (Torx)
  • Flip-Up lens covers (front with black/solid, rear transparent)
  • Батарэя CR2032
  • Кіраўніцтва карыстальніка (гэты дакумент)

3. Настройка

3.1 Устаноўка батарэі

  1. Locate the battery compartment cap on the side of the sight.
  2. Адкруціце вечка супраць гадзіннікавай стрэлкі.
  3. Insert the supplied CR2032 battery with the positive (+) terminal facing outwards.
  4. Carefully screw the cap back on clockwise until finger-tight. Ensure the O-ring is properly seated to maintain waterproof integrity.

Video 1: Official Aimpoint video demonstrating the installation of the CR2032 battery into the Duty RDS sight.

3.2 Усталёўка прыцэла

The Aimpoint Duty RDS comes with an integral Picatinny-style base for easy attachment to any Picatinny rail. Use the provided T10 Allen wrench to secure the mount firmly to your device. Ensure the sight is mounted securely to prevent movement during use.

Aimpoint Duty RDS Red Dot Reflex Sight mounted on a Picatinny base

Figure 2: The Aimpoint Duty RDS sight shown with its integrated Picatinny mount, ready for installation.

4. Інструкцыя па эксплуатацыі

4.1 Уключэнне/выключэнне харчавання і рэгуляванне яркасці

The sight features 10 brightness settings. The first 7 settings are for night vision compatibility, and the remaining settings are for daylight conditions. Adjust the brightness using the tactile buttons located on the side of the sight to suit ambient light conditions.

4.2 Карэкціроўка па ветравой напрамку і вышыні

Windage and elevation adjustments are protected by screw caps. Unscrew these caps to reveal the adjustment mechanisms. Use a flathead screwdriver or a coin to make precise adjustments. Each click typically corresponds to a specific change in point of impact at a given distance. Refer to the detailed user manual for specific click values.

Aimpoint Duty RDS Red Dot Reflex Sight showing adjustment caps

Малюнак 3: бок view of the Aimpoint Duty RDS, highlighting the protected windage and elevation adjustment caps.

5. Тэхнічнае абслугоўванне

5.1 Агульны догляд і ўборка

Keep the sight clean from dust and debris. Use a soft, lint-free cloth to wipe the exterior. For lenses, use a lens cleaning pen or a soft brush to remove loose particles, then gently wipe with a lens cleaning cloth and solution if necessary. Avoid abrasive materials that could scratch the lenses.

5.2 Гідраізаляцыя

The Aimpoint Duty RDS is submersible to 80 feet (25 meters). Ensure all caps, especially the battery compartment cap, are securely tightened to maintain its waterproof capabilities. Regularly inspect O-rings for any signs of wear or damage.

6. Выпраўленне непаладак

If the red dot does not illuminate or appears dim:

  • Check the battery: Ensure it is correctly installed with the positive (+) terminal facing outwards and is not depleted. Replace if necessary.
  • Clean battery contacts: Gently clean the battery contacts inside the compartment and on the battery itself.
  • Adjust brightness: Increase the brightness setting using the control buttons.
  • Secure caps: Ensure the battery compartment cap is fully tightened.

For other issues, consult the full user manual or contact Aimpoint customer support.

7. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
Тып прыцэльнай сеткі2 MOA dot
Тэрмін службы батарэі30,000 hours (over 3 years) of constant operation on setting 6
Тып батарэіCR2032 (у камплекце)
Налады яркасці10 (7 night vision compatible, 3 daylight)
Тып мацаванняIntegral Picatinny-style base
Апускальнасць80 футаў (25 метра)
Weight (sight only)3.8 унцыі / 108 г
МатэрыялАлюміній
Дыяметр лінзы аб'ектыва39 міліметра
Павелічэнне1 х

8. Гарантыя і падтрымка

Aimpoint guarantees its products to be free from original manufacturer defects in material and/or workmanship under normal use for a period of 2 years for professional or competition use and 10 years for personal use from the date of purchase.

For further assistance, product registration, or warranty claims, please visit the official Aimpoint webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў.

Наведайце ст Aimpoint Store каб атрымаць больш прадуктаў і інфармацыі.

© 2023 Aimpoint. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.