Green Soul Vision Pro V2 Ergonomic Gaming Chair User Manual

1. Уводзіны

The Green Soul Vision Pro V2 is an ergonomic gaming chair designed for comfort and performance. It features breathable, abrasion-resistant premium fabric and ultra-fine stitching for durability. The chair includes magnetic memory foam neck and lumbar pillows for targeted support, fully adjustable 4D armrests, an integrated retractable leg rest, and advanced functional features like a 180° recline.

Figure 1: Green Soul Vision Pro V2 chair in a typical setup.

Figure 2: Detail of the chair's breathable fabric and stitching.

2. Інфармацыя па бяспецы

• Не стаяць на крэсле.
• Do not use the chair as a step stool.
• Перад выкарыстаннем пераканайцеся, што ўсе балты і шрубы надзейна зацягнуты.
• Падчас рэгулявання трымайце дзяцей далей ад рухомых частак.
• Не перавышайце максімальную грузападымальнасць (гл. характарыстыкі).
• Avoid placing the chair near heat sources or direct sunlight to prevent material degradation.

3. Змесціва ўпакоўкі

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Green Soul customer support.

• спінка
• База сядзення
• Падлакотнікі (2)
• Газліфтны цыліндр
• Крышка газліфта
• Зорная база
• Ролікі (5)
• Механізм пласціны
• Magnetic Neck Pillow
• Memory Foam Lumbar Pillow
• Hardware Kit (screws, Allen wrench)

4. Налада і зборка

Green Soul offers complimentary installation services for this chair. Their team will contact you within 3 days of your order delivery to schedule a convenient installation appointment. If you choose to assemble the chair yourself, please follow the general steps below:

1. Прымацуйце колы да зорнай асновы: Insert each caster into the holes at the end of the star base until it clicks into place.
2. Устаўце газавы ліфт: Змесціце цыліндр газавага пад'ёмніка ў цэнтральную адтуліну зоркападобнай асновы. Накрыйце яго вечкам газавага пад'ёмніка.
3. Attach Mechanism Plate to Seat Base: Align the mechanism plate with the pre-drilled holes under the seat base. Secure it with screws using the provided Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. Прымацуйце падлакотнікі да асновы сядзення: Secure the armrests to the sides of the seat base using the designated screws.
5. Connect Seat Base to Gas Lift: Carefully place the assembled seat base onto the gas lift cylinder.
6. Прымацуйце спінку да асновы сядзення: Align the backrest with the mounting brackets on the seat base and secure it with screws.
7. Усталяваць падушкі: Attach the magnetic neck pillow to the headrest and position the memory foam lumbar pillow for desired support.

Figure 3: Chair dimensions for reference during assembly and setup.

5. Інструкцыя па эксплуатацыі

The Green Soul Vision Pro V2 chair offers multiple adjustment options for personalized comfort.

5.1. Рэгуляванне вышыні

To adjust the chair height, pull the lever located under the seat upwards while applying or releasinг вагі цела. Адпусціце рычаг на патрэбнай вышыні.

5.2. Функцыя нахілу спінкі

The chair features a 180° full recline function. Pull the recline lever on the side of the seat upwards and lean back to the desired angle. Release the lever to lock the position. To return to an upright position, pull the lever and lean forward.

Figure 4: Recline range from 90° to 180°.

5.3. Функцыя хістання

The chair has a 30-degree rocking function. To enable rocking, pull the tilt lock lever (often the same as the height adjustment lever) outwards. To lock the chair in an upright position, push the lever inwards.

5.4. 4D Armrests

The 4D armrests can be adjusted in four directions: height, depth (forward/backward), width (inward/outward), and pivot (rotation). Use the buttons or levers on the armrests to make these adjustments.

Figure 5: Detail of the 4D armrest adjustment mechanism.

5.5. Retractable Leg Rest

To use the integrated leg rest, pull it out from under the seat. Extend it to the desired length and position. Push it back in when not in use.

5.6. Magnetic Neck and Lumbar Pillows

The magnetic neck and lumbar pillows can be easily attached, removed, and repositioned to provide optimal support for your neck and lower back.

Малюнак 6: Закончанаview of key adjustable features including pillows, leg rest, and wheelbase.

5.7. Відэадэманстрацыя

6. Тэхнічнае абслугоўванне

• Тканіна для чысткі: Выкарыстоўвайце мяккі, damp cloth with mild soap and water to clean the fabric. Avoid harsh chemicals or abrasive cleaners.
• Чыстка падставы і колаў: Wipe the metal base and casters with a damp тканіна. Перыядычна выдаляйце валасы або смецце з колаў, каб забяспечыць плаўны рух.
• Зацяжная фурнітура: Periodically check and tighten all screws and bolts to maintain stability and safety.
• змазка: If any moving parts (e.g., gas lift, mechanism) begin to squeak, a small amount of silicone-based lubricant can be applied.

7. Выпраўленне непаладак

• Крэсла апускаецца або не трымаецца на месцы: This usually indicates a faulty gas lift cylinder. Contact customer support for a replacement.
• Скрып крэслаў: Check all bolts and screws for tightness. If the squeaking persists, apply a small amount of lubricant to the moving parts of the mechanism.
• Ролікі не круцяцца плаўна: Выдаліце ​​валасы, пыл або смецце, якія маглі зачапіцца за колы. Старанна ачысціце колы.
• Armrests Are Loose: Tighten the screws securing the armrests to the seat base.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

The Green Soul Vision Pro V2 chair comes with a Гарантыя 3 год, ensuring durability and peace of mind. For any product-related inquiries, support, or warranty claims, please contact Green Soul customer care.

• Абслугоўванне кліентаў: +91 8444-956-789
• электронная пошта: info@greensoul.online

Figure 7: Green Soul's commitment to quality and support.