NC200UD

Generic Replacement Remote Control for Philips NC200UD

Кіраўніцтва па эксплуатацыі

Уводзіны

This document provides instructions for the Generic replacement remote control, designed for use with Philips Home Theater and DVD systems that originally utilized the NC200UD remote control.

Please note that this is a replacement unit and may not offer all functions present on the original Philips remote. Its primary purpose is to provide essential control over compatible devices.

Настройка

The remote control operates using infrared (IR) technology and typically does not require programming for compatible Philips devices. Simply insert the batteries to begin use.

Ўстаноўка акумулятара

  1. Знайдзіце крышку батарэйнага адсека на задняй частцы пульта дыстанцыйнага кіравання.
  2. Зрушыце або падніміце вечка, каб адкрыць.
  3. Insert two AAA batteries (not included), ensuring correct polarity (+ і -), як паказана ўнутры адсека.
  4. Замяніце крышку батарэйнага адсека.

Інструкцыя па эксплуатацыі

Point the remote control directly at your Philips Home Theater or DVD system. Ensure there are no obstructions between the remote and the device's IR receiver.

Агульныя функцыі

  • Кнопка харчавання: Уключае або выключае прыладу.
  • Павялічыць/паменшыць гучнасць: Рэгулюе гучнасць гуку.
  • Кнопка адключэння: Адключае гук.
  • Элементы кіравання прайграваннем (прайграванне, паўза, прыпынак, перамотка наперад, перамотка назад): Manages media playback on DVD systems.
  • Navigation Buttons (Up, Down, Left, Right, OK/Enter): Выкарыстоўваецца для навігацыі па меню і выбару.
  • Кнопка крыніцы/уваходу: Switches between different input sources on your home theater system.

Note: Specific button functions may vary slightly depending on your Philips device model.

Тэхнічнае абслугоўванне

Уборка

Працірайце пульт дыстанцыйнага кіравання мяккай сухой тканінай. Не выкарыстоўвайце вадкія ачышчальнікі або абразіўныя матэрыялы, бо яны могуць пашкодзіць паверхню пульта дыстанцыйнага кіравання або ўнутраныя кампаненты.

Замена батарэі

Replace batteries when the remote's range decreases or buttons become unresponsive. Always replace both batteries simultaneously with new ones of the same type (AAA).

Захоўванне

If storing the remote for an extended period, remove the batteries to prevent leakage, which can damage the remote.

Ліквідацыю непаладак

Пульт не адказвае

  • Праверце палярнасць батарэі.
  • Заменіце старыя батарэі на новыя.
  • Ensure a clear line of sight between the remote and the device's IR receiver.
  • Verify that the remote is compatible with your specific Philips model (NC200UD or equivalent).

Абмежаваны асартымент

  • Заменіце батарэі.
  • Пераканайцеся, што адсутнасць моцных крыніц святла (напрыклад, прамых сонечных прамянёў) не перашкаджае інфрачырвонаму сігналу.

Certain Functions Not Working

  • As a replacement remote, some advanced or device-specific functions may not be supported. Refer to your Philips device's original manual for specific function requirements.

Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
МаркаРадавыя
Model (Replacement For)Philips NC200UD
Тэхналогія падлучэнняІнфрачырвоны (ВК)
Тып батарэі2 x AAA (не ўключаны)
Максімальны дыяпазонПрыкладна 5 метраў (16 футы)
Сумяшчальныя прыладыPhilips DVD/Blu-ray Player, Home Theater, Stereo System, Television, VCR (specifically those using the NC200UD remote)

Гарантыя і падтрымка

Інфармацыя аб гарантыі

Specific warranty details for this replacement remote control are not provided in this manual. Please refer to your purchase documentation or contact the seller directly for warranty inquiries.

Падтрымка кліентаў

For further assistance or troubleshooting not covered in this manual, please contact the seller or retailer from whom you purchased this product.

© 2023 Generic. Усе правы абаронены.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.