Berrcom Fingertip Pulse Oximeter (Model YM302) User Manual

1. Уводзіны

The Berrcom Fingertip Pulse Oximeter (Model YM302) is a portable, non-invasive device designed for spot-checking blood oxygen saturation (SpO2) and pulse rate (PR) in adults and pediatric users. It is intended for use in sports and aviation for wellness tracking, and not for medical diagnosis or treatment. This manual provides essential information for the safe and effective use of the device.

2. Інфармацыя па бяспецы

• This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
• Consult a medical professional for any health concerns or abnormal readings.
• Keep the device out of reach of small children to prevent choking hazards from small parts.
• Не выкарыстоўвайце оксиметр ў асяроддзі МРТ або КТ.
• Avoid exposing the device to direct sunlight, high temperatures, or moisture.
• Do not attempt to repair or modify the device yourself. Contact customer support if issues arise.

3. Прадукт скончыўсяview

3.1 Кампаненты

The Berrcom Fingertip Pulse Oximeter package includes the following items:

• 1 x Fingertip Pulse Oximeter
• 1 х шнурок
• 1 х Кіраўніцтва карыстальніка
• 2 х ААА батарэі

Image: What's in the box - Oximeter, Lanyard, Operating Instructions, AAA batteries.

3.2 Характарыстыкі прылады

The oximeter features a compact design with a bright LED display for clear readings. It includes a silicone shading design to prevent external light interference and ensure accurate measurements.

Image: Silicone Shading Design - Illustrates the internal design that prevents light interference for accurate readings.

Image: TFT Display Screen Highlighting - Shows the clear display with SpO2, PR, and PI readings.

4. Настройка

4.1 Устаноўка батарэі

1. Адкрыйце крышку батарэйнага адсека на задняй панэлі прылады.
2. Устаўце дзве батарэйкі тыпу ААА, сочачы за правільнай палярнасцю (+/-), як паказана ўнутры адсека.
3. Надзейна зачыніце крышку батарэйнага адсека.

4.2 Мацаванне шнурка

Thread the thin loop of the lanyard through the hole on the side of the oximeter. Then, thread the thicker part of the lanyard through the thin loop and pull to secure it.

5. Аперацыя

5.1 Вымярэнне

1. Open Oximeter: Press the top and bottom of the oximeter to open the finger chamber.
2. Place Finger: Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring your nail is facing upwards towards the display.
3. Націсніце кнопку харчавання: Націсніце кнопку харчавання адзін раз, каб уключыць аксіметр.
4. Wait for Results: Keep your hand still. The device will automatically begin measuring and display your SpO2, PR, PI, and pulse waveform within 5-8 seconds.

Image: How to Use the Fingertip Pulse Oximeter - Step-by-step visual instructions.

Image: Product Detail - Labeled display showing Perfusion Index, Battery Level, Pulse Rate, Pulse Wave, SpO2, Heart Beat, and Power Button.

5.2 Інтэрпрэтацыя прачытаных тэкстаў

• SpO2: Узровень насычэння крыві кіслародам.
• PR: Pulse Rate, measured in beats per minute (BPM).
• PI: Perfusion Index, indicating the strength of the pulse signal.
• Pulse Waveform: A graphical representation of your pulse.
• Узровень батарэі: Паказвае зарад акумулятара.

5.3 Разумныя функцыі

• Аўтаматычнае выключэнне: The device automatically powers off 8 seconds after your finger is removed to conserve battery life.
• Інтэлектуальныя абвесткі: Audible and visual alarms will activate if your SpO2 falls below 94% or your pulse rate goes outside the 50-130 BPM range.
• Функцыя памяці: The oximeter stores up to 20 sets of readings to help track trends over time.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

• Clean the surface of the oximeter with a soft cloth damp70% ізапрапілавага спірту.
• Не апускайце прыладу ў вадкасць.
• Ensure the device is completely dry before reuse.

6.2 Захоўванне

• Store the oximeter in a cool, dry place away from direct sunlight.
• Калі прылада не будзе выкарыстоўвацца працяглы час, выміце батарэйкі, каб прадухіліць іх уцечку.

6.3 Замена батарэі

When the battery indicator on the display shows low power, replace the AAA batteries as described in the 'Battery Installation' section.

7. Выпраўленне непаладак

• Няма дысплея/прылады не ўключаецца: Check battery polarity and ensure batteries are correctly installed. Replace batteries if necessary.
• 'Finger Out' Message: Ensure your finger is fully inserted into the finger chamber and is resting flat on the sensor. Keep your hand still during measurement.
• Няправільныя паказанні: Ensure your finger is clean and free of nail polish or artificial nails. Avoid excessive movement during measurement. Cold fingers can also affect accuracy; warm your hand before use.
• Арыентацыя дысплея: The display orientation may change with each press of the power button while the device is on. This is a feature, not a malfunction.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

Berrcom products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or contact Berrcom customer service directly. Keep your purchase receipt as proof of purchase.