Уводзіны
This manual provides essential information for the safe and effective use of your Lepro SW1 AI Smart Outdoor LED Strip Lights. These 32.8ft IP65 waterproof RGBCW light strips offer tunable white light from 2700K to 5700K and are controlled via the Lepro app and voice commands. Please read these instructions thoroughly before installation and operation.
Што ў скрынцы
Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя.
- 1 святлодыёдная стужка 32.8 фута
- 1 x 9.84ft Cable with Controller
- 1 x Wall Adapter (36V 24W)
- 12 х мантажныя заціскі
- 12 x Screws for Mounting
- 12 x Anchors for Mounting
- 4 x Cable Clips for Securing Power Supply & Controller
- 4 x Screws for Securing Power Supply & Controller
- 4 x Anchors for Securing Power Supply & Controller
- 1 х Кіраўніцтва карыстальніка
Важная інфармацыя па бяспецы
- This SW1 strip light is designed for outdoor use with an IP65 waterproof rating, making it dust-tight and protected from low-pressure water jets.
- The power supply (adapter) is не rated for direct outdoor exposure. It must be placed in an electrical box or a protected, dry location for safe and long-term usage.
- Do not cut the strip lights. The length should be selected to closely match your requirements, as trimming will damage the product and void the warranty.
- Ensure the installation surface is dry and clean before attaching the strip lights.
- Always use the provided screws and clips to securely fasten the adapter, controller, and light strip. Adhesive backing alone may not be sufficient for long-term outdoor installation.
- Дыяпазон рабочых тэмператур: ад -20°C да 40°C (ад -4°F да 104°F).
Настройка і ўстаноўка
Follow these steps for proper installation and initial setup of your LED strip lights.
- Праверце святло: Before permanent installation, connect the strip light to the controller and power adapter, then plug it into an outlet to ensure all lights function correctly. Do not test while the strip is still rolled up.
- Падрыхтуйце паверхню: Clean the desired installation surface thoroughly to remove any dust or debris. Ensure it is dry.
- Secure the Power Adapter: Place the power adapter in a suitable electrical box or a protected, dry outdoor location. It must not be directly exposed to weather elements.
- Secure the Controller: Use the provided clips and screws to securely fasten the controller to a dry, clean surface.
- Прымацаваць святлодыёдную стужку: Carefully peel away the backing paper from the adhesive on the light strip. Attach the strip to the cleaned surface.
- Замацуйце з дапамогай заціскаў: Use the provided clips and screws to further secure the LED strip in place along its entire length. This provides additional stability and ensures long-term adhesion, especially in outdoor conditions.
Падключэнне да праграмы
The Lepro SW1 strip light is controlled exclusively via the Lepro app. It is not compatible with the "Lepro Lampux» або праграмы «Разумнае жыццё».
- Download the Lepro App: Пошук "Lepro" in your device's app store and download the official application.
- Зарэгістраваць уліковы запіс: Open the app and follow the prompts to register a new user account.
- Уключыце Bluetooth і Wi-Fi: Ensure your phone's Bluetooth is enabled and that your phone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
- Актываваць святло: Plug in the strip lights to activate them.
- Дадаць прыладу: In the Lepro app, navigate to the homepage and click "Add Device".
- Find SW1: The app should automatically detect the SW1 device. Select it to proceed.
- Pair with Wi-Fi: Follow the in-app instructions to pair the device with your 2.4GHz Wi-Fi network.
- Завяршэнне: Once paired, the lights are ready for control via the app.
Video: Detailed installation and connection steps for the Lepro SW1 LED strip lights.
Інструкцыя па эксплуатацыі
App Control (Lepro App)
The Lepro app provides comprehensive control over your SW1 LED strip lights, offering a wide range of customization options.
- Millions of Color Options: Select from 16 million RGB colors and adjust brightness from 1-100%.
- Наладжвальны белы: Choose between 2700K warm white and 5700K cool daylight for various moods and year-round use.
- LightGPM 4 - Personalized AI Lighting Designer: This feature learns your preferences and suggests lighting designs. The more you use it, the more tailored the lighting effects become.
- Take a Photo, Get the Vibe: Upload an image (e.g., a room photo, movie poster) to the app, and LightGPM will generate a lighting design that matches the image's colors and mood.
- Сінхранізацыя музыкі LightBeats: Sync your lights with music played through your phone's microphone for dynamic lighting effects. Keep the music sync page active and the phone screen on for continuous operation.
Галасавое кіраванне
The Lepro SW1 lights are compatible with Amazon Alexa and Google Assistant for hands-free control.
- Easy Voice Commands: Use simple voice commands to change colors, adjust brightness, or activate specific lighting themes. For example, say "Alexa, turn on the strip lights" or "Hey Google, set the lights to blue."
- Не патрабуецца канцэнтратар: Direct connection via 2.4GHz Wi-Fi to the Lepro app enables voice control without an additional hub.
Video: Instructions on how to connect Lepro AI lights to Alexa for voice control.
Тэхнічнае абслугоўванне
Proper maintenance ensures the longevity and performance of your Lepro SW1 LED Strip Lights.
- Уборка: Periodically wipe the strip lights with a soft, damp сурвэткай для выдалення бруду і смецця. Пазбягайце выкарыстання агрэсіўных хімікатаў або абразіўных ачышчальнікаў.
- Праверце злучэнні: Regularly check the power adapter, controller, and strip connections for any signs of wear, damage, or loose fittings. Ensure the power adapter remains protected in an electrical box.
- Бяспечнае мацаванне: Over time, environmental factors can affect mounting. Periodically check that all clips and screws are securely fastened and the strip is firmly in place.
- Ўстойлівасць да надвор'я: While the strip is IP65 waterproof, extreme weather conditions (e.g., heavy storms, prolonged freezing temperatures) can still impact performance. Ensure proper drainage around the installation area.
Ліквідацыю непаладак
If you encounter issues with your Lepro SW1 LED Strip Lights, refer to the following common solutions.
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло не гарыць. | No power, loose connection, faulty adapter/controller. | Check power outlet. Ensure all connections are secure. Test the strip before installation. |
| Cannot connect to Lepro App. | Incorrect Wi-Fi band, Bluetooth off, app not updated, incorrect pairing steps. | Ensure phone is on 2.4GHz Wi-Fi (5GHz is not supported). Turn on Bluetooth. Follow app connection steps carefully. Restart app and lights. |
| Галасавое кіраванне не працуе. | Not linked to Alexa/Google Assistant, poor Wi-Fi signal, incorrect commands. | Ensure Lepro app is linked to your Alexa/Google Home account. Check Wi-Fi signal strength. Use clear and correct voice commands. |
| Lights flicker or show incorrect colors. | Loose connection, damaged strip, power supply issue. | Check all connections. If a section is damaged, the strip cannot be repaired or cut. Ensure power adapter is functioning correctly. |
| Клей не трымаецца. | Surface not clean/dry, insufficient clips, extreme temperatures. | Ensure surface is clean and dry. Use all provided clips and screws for secure mounting. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | SW1-10 |
| Даўжыня | 32.8 футаў (10 метраў) |
| Цветотип | RGBCW (чырвоны, зялёны, сіні, халодны белы, цёплы белы) |
| Каляровая тэмпература | 2700K-5700K Рэгуляваны белы |
| Рэйтынг воданепранікальнасці | IP65 (Strip Light & Controller) |
| Крыніца харчавання | Правадная электрычная |
| тtage | 36 В (пастаянны ток) |
| Ватtage | 24 ват |
| Метад кантролю | App Control (Lepro App) |
| Пратакол злучэння | Wi-Fi (толькі 2.4 ГГц) |
| Сумяшчальнасць галасавога памочніка | Amazon Alexa, Google Assistant |
| Тып матэрыялу | Медзь, пластык |
| Вага прадмета | 1.9 фунта |
| Колькасць крыніц святла | 270 |
| UPC | 810168792149 |
Гарантыя і падтрымка
Your Lepro SW1 AI Smart Outdoor LED Strip Lights come with a 2-гадовая гарантыя вытворцы.
For technical support, warranty claims, or further assistance, please contact Lepro customer service through their official website or the contact information provided in the Lepro app.
Вы таксама можаце наведаць в Крама Lepro на Amazon каб атрымаць дадатковую інфармацыю пра прадукт і рэсурсы падтрымкі.