1. Важныя інструкцыі па бяспецы
Please read all instructions carefully before using the Morpilot Milk Frother HS010-S. Retain this manual for future reference.
- Не апускайце базавы блок у ваду ці іншыя вадкасці.
- Пераканайцеся, што аб'ём блока харчаванняtage matches the rating label on the frother.
- Не выкарыстоўвайце прыбор з пашкоджаным шнуром або вілкай.
- Захоўваць у месцах, недаступных дзецям.
- Use only the frother jug and whisk attachments provided with the unit.
- Пазбягайце кантакту з рухомымі часткамі.
- Do not fill above the maximum fill line indicated inside the jug.
- Always ensure the frother jug is properly seated on the base before operation.
2. Прадукт скончыўсяview
The Morpilot Stainless Steel Milk Frother HS010-S is designed to create hot or cold milk foam for various beverages. It features a stainless steel jug and an induction heating base.
Малюнак 1: Morpilot Stainless Steel Milk Frother HS010-S. This image displays the complete milk frother unit, including the black base with control buttons, the stainless steel jug with a handle, two whisk attachments (one for frothing, one for heating), and a small cleaning brush. A cup of frothed coffee and coffee beans are also visible in the foreground.
Кампаненты:
- Induction Base: Змяшчае награвальны элемент і панэль кіравання.
- Збан з нержавеючай сталі: Removable jug for milk, with a handle and pour spout.
- Венчык для ўзбівання пены: Used for creating thick foam.
- Heating Whisk: Used for heating milk with minimal foam.
- Ачышчальная шчотка: For maintaining the frother.
3. Настройка
- Распакуйце: Акуратна дастаньце ўсе кампаненты з упакоўкі.
- Чысты: Before first use, wash the stainless steel jug and whisk attachments with warm soapy water. Rinse thoroughly and dry. Wipe the exterior of the induction base with a damp тканіна. Не апускайце аснову ў ваду.
- Размяшчэнне: Place the induction base on a stable, flat, heat-resistant surface.
- Падключэнне сілкавання: Падключыце шнур сілкавання да заземленай электрычнай разеткі.
4. Інструкцыя па эксплуатацыі
4.1 Choosing the Whisk
- For Frothing (Hot or Cold): Use the frothing whisk (with the spring coil).
- For Heating Milk (Minimal Foam): Use the heating whisk (flat whisk).
Insert the desired whisk onto the pin at the bottom of the jug before adding milk.
4.2 Adding Milk
- Pour fresh, cold milk into the jug.
- Observe the internal fill lines:
- MAX FROTH: Do not exceed this line when frothing milk (approx. 150ml).
- МАКСІМАЛЬНАЕ НАГРЭВА: Do not exceed this line when only heating milk (approx. 300ml).
- МІН.: Always fill at least to the minimum line (approx. 75ml).
Using whole milk (3.5% fat) typically yields the best frothing results.
4.3 Выбар праграмы
Place the jug onto the induction base. The control panel on the base features several illuminated icons. Press the power button (⏻) to activate the frother, then select your desired function:
- Hot Dense Foam: Націсніце кнопку з cup with three wavy lines icon. Ideal for cappuccinos.
- Hot Airy Foam: Націсніце кнопку з cup with two wavy lines icon. Suitable for lattes.
- Hot Milk (No Foam): Націсніце кнопку з solid cup icon. Use the heating whisk for best results.
- Халодная пена: Націсніце кнопку з значок сняжынкі. The milk will be frothed without heating.
The selected program's indicator light will illuminate. The frother will automatically stop when the program is complete.
4.4 After Frothing
- Carefully remove the jug from the base.
- Pour the frothed milk into your beverage.
- Clean the jug and whisk immediately after use to prevent milk residue from drying.
5. Чыстка і тэхнічнае абслугоўванне
Regular cleaning ensures optimal performance and extends the life of your frother.
- Адключыць: Always unplug the frother from the power outlet before cleaning.
- Астуджэнне: Allow the frother to cool completely before cleaning.
- Jug and Whisk: Remove the whisk from the jug. Wash the stainless steel jug and whisk attachments with warm soapy water using a soft sponge or the provided cleaning brush. Rinse thoroughly and dry immediately. The jug and whisks are dishwasher safe (top rack only).
- Базавая адзінка: Wipe the exterior of the induction base with a soft, damp cloth. Do not use abrasive cleaners or scourers. Never immerse the base unit in water or any other liquid.
- захоўванне: Store the frother in a clean, dry place when not in use.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Нарыхтоўшчык не ўключаецца. | Not plugged in; power outlet not working; frother not properly seated on base. | Check power connection; try a different outlet; ensure jug is correctly placed on the base. |
| Milk not frothing or heating properly. | Incorrect whisk used; milk level too high/low; milk type unsuitable; whisk not properly attached. | Ensure correct whisk is used for desired function; check milk fill lines; use fresh, cold whole milk; ensure whisk is securely attached to the pin. |
| Burning smell or milk sticking to bottom. | Milk residue from previous use; jug not clean. | Clean the jug thoroughly after each use. Do not exceed MAX fill lines. |
| Пенагенератар нечакана спыняецца. | Актываваная абарона ад перагрэву. | Unplug the unit and allow it to cool down for at least 10 minutes before reuse. |
7. Тэхнічныя характарыстыкі
- мадэль: HS010-S
- Марка: Марпілот
- матэрыял: Нержавеючая сталь
- Памеры: 20.5 х 14.5 х 14.5 см (прыблізныя памеры ўпакоўкі)
- Вага: 950 g (approximate item weight)
- UPC: 810206591185
- Max Frothing Capacity: 150 мл
- Max Heating Capacity: 300 мл
8. Гарантыя і падтрымка
Morpilot provides a standard manufacturer's warranty for this product. For detailed warranty information, product support, or to report any issues, please contact Morpilot customer service through their official webсайт або прадаўца, дзе быў набыты тавар.
Please have your model number (HS010-S) and proof of purchase ready when contacting support.
Webсайт: www.morpilot.com