Кіраўніцтва карыстальніка разгалінавальнага перамыкача FeinTech AX341 HDMI 2.1 eARC

1. Уводзіны

The FeinTech AX341 HDMI 2.1 eARC Splitter Switch is designed to manage multiple HDMI sources and outputs in a home theater or gaming setup. This device allows you to connect up to four HDMI source devices (such as gaming consoles, Blu-ray players, streaming boxes, or PCs) to two display devices simultaneously. It also features an integrated audio extractor for eARC/ARC soundbars, optical TOSLINK, and 3.5mm analog audio outputs. The AX341 supports advanced HDMI 2.1 features, including 8K@60Hz and 4K@120Hz resolutions, HDR10+, Dolby Vision, VRR, ALLM, QMS, QFT, and SBTM.

2. Асноўныя магчымасці

• 4 HDMI 2.1 Inputs & 2 HDMI Outputs: Connect up to four source devices to two displays concurrently, suitable for TV and video projector setups.
• eARC/ARC & Audio Extractor: Transmit audio to a soundbar via HDMI ARC/eARC, optical TOSLINK (stereo or Dolby Digital only), or 3.5mm analog jack (stereo only).
• Automatic Switching & CEC Functionality: Features automatic input selection, auto-power-on function, and control of source devices via TV remote or vice versa.
• Шырокая сумяшчальнасць:
  • Аўдыё: Supports Dolby Atmos, DTS:X, TrueHD, Dolby Digital, PCM5.1, and more.
  • Відэа: Supports 8K@60Hz, 4K@120Hz, Dolby Vision, HDR10+, and more.
  • Гульні: Supports VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode).
• 4K/60Hz + Downscaler: Enables simultaneous output to 4K and 1080p displays without resolution conflicts.

3. Змесціва ўпакоўкі

Калі ласка, пераканайцеся, што ўсе прадметы прысутнічаюць у пасылцы:

• FeinTech AX341 HDMI 2.1 eARC Splitter Switch Unit
• Адаптар сілкавання
• Пульт дыстанцыйнага кіравання (з 1 батарэйкай CR2032 у камплекце)
• Кіраўніцтва карыстальніка (гэты дакумент)

4. Схема прылады

Малюнак 1: Топ view of the FeinTech AX341 unit. This image displays the front panel with power indicator, input indicators (IN 1-4), eARC audio indicators (TV1, TV2), and control buttons (SWITCH, AUTO, eARC). It also shows the EDID switch and SERVICE port.

Малюнак 2: Вуглавы view of the FeinTech AX341 unit. This perspective provides a clearer view of both the front panel controls and the rear panel connections, including HDMI inputs, HDMI outputs, and audio extraction ports.

Элементы кіравання і індыкатары на пярэдняй панэлі:

• Кнопка/індыкатар харчавання: Turns the device on/off and indicates power status.
• IN 1-4 Indicators: Light up to show which HDMI input is currently active.
• TV1/TV2 eARC Audio Indicators: Indicate which TV's eARC audio is being extracted.
• Кнопка ПЕРАКЛЮЧЭННЯ: Ручное пераключэнне паміж уваходамі HDMI.
• Кнопка AUTO: Activates/deactivates automatic input switching.
• Кнопка eARC: Selects the eARC audio source (TV1 or TV2).
• Пераключальнік EDID: For advanced display compatibility settings.
• СЭРВІСНЫ порт: For firmware updates or technical service.

Парты на задняй панэлі:

• HDMI IN 1-4: Connect your source devices (e.g., gaming console, Blu-ray player).
• HDMI OUT 1 (TV1 eARC) & HDMI OUT 2 (TV2): Connect to your display devices (TVs, projectors). HDMI OUT 1 supports eARC/ARC for audio return.
• AUDIO OUT (Optical TOSLINK): Connect to soundbars or AV receivers for optical audio.
• AUDIO OUT (3.5mm Jack): Connect to stereo systems or headphones for analog audio.
• Уваходная магутнасць 5 В пастаяннага току: Падключыце прадастаўлены адаптар сілкавання.

5. Налада і падключэнне

Follow these steps to set up your FeinTech AX341 HDMI Splitter Switch:

1. Прылады выключэння: Before making any connections, ensure all devices (source players, displays, sound systems) are powered off and unplugged.
2. Падключыце прылады-крыніцы: Connect your HDMI source devices (e.g., gaming console, streaming box, Blu-ray player, PC) to the HDMI IN 1-4 ports on the AX341 using high-quality HDMI 2.1 cables.
3. Падключэнне дысплеяў:
   • Connect your primary display (e.g., TV with eARC/ARC support) to the HDMI OUT 1 (TV1 eARC) порт.
   • Connect your secondary display (e.g., projector) to the HDMI OUT 2 (TV2) порт.
4. Connect Audio System (Optional):
   • For eARC/ARC soundbars: Ensure your soundbar is connected to the HDMI ARC/eARC port of your TV (connected to HDMI OUT 1). The AX341 will extract audio from this connection.
   • For optical audio: Connect your soundbar or AV receiver to the AUDIO OUT (Optical TOSLINK) порт.
   • For analog stereo audio: Connect your stereo system or headphones to the AUDIO OUT (3.5mm Jack) порт.
5. Падключыце харчаванне: Падключыце адаптар сілкавання, які ўваходзіць у камплект, да DC 5V Уваходнае харчаванне on the AX341, then plug it into a power outlet.
6. Уключаныя прылады: Power on the AX341, then your displays, and finally your source devices.

Малюнак 3: Detailed connection diagram illustrating how to connect gaming consoles, streaming boxes, Blu-ray players, and PCs to the AX341, and how to connect the AX341 to TVs, projectors, soundbars, and other audio systems.

6. Аперацыя

6.1. Input Switching

• Ручное пераключэнне: Націсніце ПЕРАКЛЮЧАЦЬ button on the front panel or the corresponding input button on the remote control to cycle through the HDMI inputs (IN 1-4). The active input indicator will light up.
• Аўтаматычнае пераключэнне: Націсніце АЎТА button on the front panel or remote control to enable/disable automatic input switching. When enabled, the AX341 will automatically detect and switch to the most recently activated source device. Note: Automatic switching may not be fully compatible with all devices (e.g., Apple TV or Xbox).

6.2. eARC Audio Extraction

• The AX341 can extract eARC/ARC audio from either HDMI OUT 1 (TV1) or HDMI OUT 2 (TV2).
• Націсніце eARC button on the front panel or remote control to select which TV's audio return channel should be used for extraction. The corresponding TV1 or TV2 eARC Audio indicator will light up. This is particularly useful when switching between a TV and a projector.
• The extracted audio will be available on the HDMI OUT 1 (eARC/ARC), Optical TOSLINK, and 3.5mm analog audio outputs.

6.3. Кантроль ЦВК

The AX341 supports CEC (Consumer Electronics Control), allowing for integrated control between compatible devices. This enables functions such as:

• Controlling the volume of your soundbar using your TV's remote control.
• Automatic power-on/off of connected devices (e.g., the AX341 powering on with your TV).

Ensure CEC is enabled on all connected devices (TV, soundbar, source players) for this functionality to work.

7. Тэхнічныя характарыстыкі

8. Выпраўленне непаладак

If you encounter issues with your FeinTech AX341, please refer to the following common troubleshooting steps:

• Няма відэа/аўдыёвыхаду:
  • Ensure all HDMI cables are securely connected to both the AX341 and your source/display devices.
  • Verify that the correct input is selected on the AX341 (check input indicators).
  • Пераканайцеся, што ваш дысплей настроены на правільны ўваход HDMI.
  • Try different HDMI cables, as faulty cables can cause signal issues.
  • Bypass the AX341 by connecting a source directly to a display to isolate the problem.
  • Restart all connected devices, including the AX341, by unplugging them from power for 30 seconds and then reconnecting.
• Audio Issues (No Sound, Distorted Audio):
  • Check audio connections to your soundbar or AV receiver (HDMI eARC/ARC, Optical, 3.5mm Jack).
  • Ensure the correct audio input is selected on your sound system.
  • If using eARC, verify that eARC is enabled on your TV and the AX341 is set to the correct TV's eARC audio (TV1 or TV2).
  • Confirm that the audio format from your source device is supported by your sound system and the AX341's audio extraction ports (e.g., TOSLINK only supports stereo or Dolby Digital).
  • Adjust volume levels on all devices.
• Аўтаматычнае пераключэнне не працуе:
  • Ensure the AUTO function is enabled on the AX341.
  • Note that some source devices (e.g., Apple TV, Xbox) may not fully support automatic switching.
  • Try manually switching inputs if auto-switching is unreliable.
• CEC Control Problems:
  • Verify that CEC (often called Anynet+, Bravia Sync, SimpLink, etc.) is enabled on your TV, soundbar, and source devices.
  • CEC functionality can be inconsistent between different brands and models.
• Resolution/Picture Quality Issues:
  • Ensure your HDMI cables are rated for HDMI 2.1 and support the desired resolution (e.g., 8K or 4K@120Hz).
  • Check the resolution settings on your source device and display.
  • If using the downscaler, ensure it is functioning as expected for 1080p displays.

9. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your FeinTech AX341, follow these maintenance guidelines:

• Уборка: Для чысткі прылады выкарыстоўвайце мяккую сухую тканіну. Не выкарыстоўвайце вадкія ачышчальнікі або аэразолі.
• Вентыляцыя: Пераканайцеся, што прылада знаходзіцца ў добра вентыляваным месцы, каб пазбегнуць перагрэву. Не блакуйце вентыляцыйныя адтуліны.
• Апрацоўка: Асцярожна звяртайцеся з прыладай. Пазбягайце падзення або моцных удараў.
• Асяроддзе: Keep the device away from moisture, extreme temperatures, and direct sunlight.
• Магутнасць: Always use the provided power adapter. Disconnect power during lightning storms or when unused for long periods.

10. Гарантыя і падтрымка

FeinTech products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official FeinTech webсайт.

When contacting support, please have your product model (AX341) and purchase information readily available.