1. Уводзіны
Thank you for choosing the Oasser Portable Tire Inflator Model TZ101. This compact and powerful device is designed for quick and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring a 150 PSI maximum pressure, an LCD display, LED light, and USB charging capabilities, it offers convenience and reliability for daily use and emergencies. Please read this manual thoroughly before operation to ensure safe and optimal performance.
2. Інфармацыя па бяспецы
Каб пазбегнуць траўмаў або пашкоджання прылады, заўсёды выконвайце наступныя правілы бяспекі:
- Захоўвайце прыладу далей ад дзяцей.
- Не выкарыстоўвайце надзімальнік у вільготных умовах або побач з лёгкаўзгаральнымі вадкасцямі ці газамі.
- Ensure the air hose is securely connected to the valve stem before starting inflation.
- Do not over-inflate. Always refer to the recommended pressure for your specific item. The device features an auto-stop function, but manual monitoring is advised.
- Важная заўвага: This inflator is not suitable for items requiring very low pressure (typically below 3 PSI) or large air volumes, such as truck tires, air mattresses, inflatable boats, kayaks, pools, water slides, yoga balls, paddle boards, or other large inflatables. Using it for these items risks over-inflation or pump damage.
- Пазбягайце працяглай бесперапыннай працы, каб пазбегнуць перагрэву. Дайце прыладзе астыць, калі яна награваецца.
- Do not disassemble or modify the device. Contact customer support for any repairs.
3. Прадукт скончыўсяview і кампаненты
The Oasser Portable Tire Inflator comes with a complete kit for various inflation needs.
Змест пакета:
- Oasser Tire Inflator (Model TZ101)
- Air Hose (30cm)
- Nozzles: Presta-to-Schrader adapter, ball inflator needle, long and short tapered nozzles
- Сумка для захоўвання
- Зарадны кабель Type-C
- Кіраўніцтва карыстальніка (гэты дакумент)
Малюнак 3.1: Уключаныя кампаненты
4. Настройка
4.1 Зарадка прылады
Before first use, fully charge the tire inflator. The device is powered by a high-capacity rechargeable battery.
- Connect the provided USB-C charging cable to the Type-C input port on the inflator.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a USB port.
- The LCD display will indicate the charging status. A full charge typically takes approximately 4 hours.
Figure 4.1: Dual Charging Methods (Self-Charging and Power Bank Function)
4.2 Attaching the Air Hose
Screw the air hose securely into the designated port on the top of the inflator unit.
5. Інструкцыя па эксплуатацыі
5.1 Асноўныя дзеянні
Figure 5.1: Operating Steps Overview
- Падключыць: Attach the air hose to the inflator. Securely attach the quick-lock air chuck onto the tire's valve stem. Ensure a tight, leak-free connection.
- Уключэнне: Націсніце і ўтрымлівайце кнопку харчавання (U) for 3 seconds to turn on the device. The LCD screen will illuminate, displaying the current pressure and preset value.
- Задаць параметры:
- Націсніце кнопку рэжыму (M) to cycle through the 5 preset inflation modes: Car, Motorcycle, Bicycle, Ball, and Custom.
- Press the unit button (U) to select your desired pressure unit (PSI, BAR, KPA, kg/cm²).
- Use the '+' and '-' buttons to adjust the target pressure value. The device remembers your last used settings for quick startup.
- Пачаць інфляцыю: Націсніце кнопку харчавання (U) again to begin inflating. The inflator will automatically stop once the preset pressure is reached.
- Адключыць: Once inflation is complete, quickly detach the air chuck from the valve stem.
5.2 прадусталяваных рэжыму
The inflator offers 5 preset modes for common inflation tasks:
- Рэжым аўтамабіля: For standard car tires (typically 26-50 PSI).
- Рэжым матацыкла: For motorcycle tires (typically 26-45 PSI).
- Рэжым ровара: For bicycle tires (typically 30-120 PSI).
- Рэжым мяча: For sports balls (typically 4-16 PSI).
- Карыстальніцкі рэжым: Allows manual setting of pressure up to 150 PSI for other inflatables.
Figure 5.2: 5 Pre-Set Inflation Modes
5.3 Функцыя святлодыёднай падсветкі
The built-in LED light provides illumination for nighttime use or emergencies.
- Націсніце кнопку святла (💡) once for a steady white light.
- Press again for a slow red flash (hazard warning).
- Press a third time for an SOS fast red flash.
- Націсніце чацвёрты раз, каб выключыць святло.
Figure 5.3: 3-Mode LED Lighting
5.4 Функцыя знешніх зарадных прылад
The inflator can also serve as a power bank to charge other devices.
- Connect your device's charging cable to the USB-A output port (5V/1A) on the inflator.
- Надзімальнік пачне зараджаць вашу прыладу.
6. Тэхнічнае абслугоўванне
6.1 Ачыстка
Працярыце знешнія паверхні нагнетальніка мяккай губкайamp тканіна. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя ачышчальнікі. Перад захоўваннем пераканайцеся, што прылада сухая.
6.2 Захоўванне
Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, ensure the battery is charged to approximately 50% and recharge every 3-6 months to maintain battery health.
Figure 6.1: Compact Size for Easy Storage
7. Выпраўленне непаладак
If you encounter issues with your Oasser Portable Tire Inflator, refer to the following common problems and solutions:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Прылада не ўключаецца. | Нізкі зарад батарэі; кнопка харчавання ўтрымлівалася недастаткова доўга. | Цалкам зарадзіце прыладу. Націсніце і ўтрымлівайце кнопку харчавання на працягу 3 секунд. |
| Inflator runs but no air comes out or inflation is slow. | Air hose not securely connected; Valve stem blocked; Incorrect nozzle used. | Ensure air hose is tightly screwed in and air chuck is firmly attached to the valve. Check valve stem for obstructions. Use the correct nozzle adapter. |
| Device stops before reaching preset pressure. | Low battery; Overheating protection activated. | Recharge the device. Allow the inflator to cool down for 10-15 minutes before resuming operation. |
| Няправільныя паказанні ціску. | Loose connection; Sensor malfunction. | Ensure the air chuck is securely attached. If the problem persists, contact customer support. |
If the issue is not resolved by the above steps, please contact Oasser customer support.
8. Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| Нумар мадэлі | TZ101 |
| Максімальны ціск | 150 PSI |
| Памеры прадукту | 9 х 4.8 х 13 см (3.5 х 1.9 х 5.1 цалі) |
| Вага прадмета | 540 г |
| Крыніца харчавання | Харчаванне ад батарэі (літый-іённы) |
| тtage | 3.7 вольт |
| Порт для зарадкі | USB Type-C |
| USB выхад | 5V/1A (for power bank function) |
| Даўжыня шланга | 30 см |
| Узровень гуку | 70 дэцыбел |
| Асаблівасці | Cordless, Portable, Emergency LED light, Power bank function, One-touch preset modes, Memory function, Quick inflation, Smart auto-stop |
9. Гарантыя
The Oasser Portable Tire Inflator Model TZ101 comes with a Гарантыя 12 месяцаў from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance. Please retain your proof of purchase for warranty claims.
10. Падтрымка кліентаў
For any questions, technical assistance, or warranty claims, please contact Oasser customer support through the retailer where you purchased the product or visit the official Oasser website for contact information. Please have your model number (TZ101) and proof of purchase ready when contacting support.